• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.921-926
• /
• 1998

CANFLEX 연료봉 다발의 3000 시간 내구성 시험 기간 동안 속도센서를 사용하여 압력관 내부에 장전된 연료봉 다발의 진동을 측정하였다. 압력관 내부에 장전된 연료봉의 진동측정은 고온, 고압, 그리고 공간적 제약 때문에 가속도계나 스트레인 게이지 같은 접촉센서로는 측정할 수 없다. 비접촉 센서를 사용하면 이러한 난점을 해결하고 압력관 내부에 장전된 연료봉 다발의 진동을 측정할 수 있다. 속도센서는 비접촉 센서로서 가우스(gauss)의 크기를 감지하여 전압을 출력하는 센서이지만, 측정거리, 주파수, 그리고 속도와 가우스가 비선형이기 때문에 교정을 한 후에 사용하여야 한다. 본 본문에는 속도센서의 교정방법과 압력관 내부에 고온, 고압의 유체가 흐를 때 발생하는 연료봉 다발의 진동특성을 구하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.11
• /
• pp.1147-1156
• /
• 2011

A contact-type area-varying capacitive displacement sensor, or CLECDiS, can measure displacements over millimeter ranges with nanometer resolution. However, a small changes in the contact condition due to the surface profile or friction, which are inherent characteristics of contact-type sensors, lead to significant distortion of the output signal. Therefore, ensuring reliable contact conditions during CLECDiS measurements is the most important area to be improved in their actual use. Herein, in order to design an instrument for ensuring reliable contact conditions, the contact condition is analyzed by characterizing the signal distortion, observing the pressure distribution between the contacting surfaces, and measuring the motional errors of the sensor using a laser Doppler vibrometer (LDV). The manufactured instrument enables a CLECDiS to be used in an ultraprecise positioning system with improved reliability.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.1019-1025
• /
• 2003

There are many kinds of seam trackers in the industrial welding field. We are proposed the contact seam tracking sensor applying strain gauges kind of contact sensor that mostly used in welding part now. For this seam tracking experiment, we made the strain gauges sensor by ourselves and tested how well the sensor tracks the seam. The experiment device consist of strain gauges sensor, amplifier circuit of strain gauges signal, saw wave generator, MOSFET power diving circuit and X-Y slide by moved DC motor. The tracking areas are X-Y planes(left, right, up and down) and the change of strain gauge resistance causes to move DC motor that connected to X-Y slide. As a result of experiment, we confirmed that the strain gauges sensor tracks a seam well, and X-Y slide DC motor was controlled by PWM control.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.1 s.307
• /
• pp.1-6
• /
• 2006

The noncontact optical sensor using the hologram laser and automatic power controller is developed to measure a thickness of transparent objects and achieve excellent performance. Due to the contact between the tip of the sensor and the surface of objects, the tip is abraded. In addition the casting glass under high temperature results in extending the size of sensor body. The accuracy of the sensor is degraded due to these reasons. In this paper, to overcome these problems, we proposed a low cost non-contact optical sensor that is composed of a hologram laser unit used for optical pickup of CD player and a plastic lens. Therefore the problems caused by the contact sensor are solved by using the noncontact sensor. The noncontact sensor has to move toward the objects and obtain the focus error signal to measure a position of transparent objects. While the internal temperature of the sensor is controlled under ${\pm}0.1^{\circ}$, many trials shows ${\pm}2{\mu}m$ measurement error as excellent performance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.245-249
• /
• 2010

Now normally using a contact method of vehicle Inhibitor Switch that is use direct voltage level signal. This method is good solution for signal deliverly. but The contacted method have a short lifetime because of deterioration of contact surface. so we suggest to non-contacted method using magnetic sensor. The magnetic sensor is used to non-contacted method that is solution for problem of contacted method. In this paper using that of magnetic sensor feature, so we applied to Vehicle Transmitter switch that of non-contacting method. Sensor voltage outputs have variable electric potential that normally 0 mV to 150 mV, and it is depend on Switch Angle. we used two differential sin wave for switching of 5 state signal.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.5
• /
• pp.61-71
• /
• 2011

To measure the fatigue of metallic objects at high speed vibration while non-contact precision displacement measurement on how to have a lot of research conducted. Noncontact high-speed vibration detection sensor of the eddy current sensors and laser sensors are used, but it is very expensive. Recently, High-speed vibrations detection using an inexpensive inductive sensor to have been studied, but is still a beginner. In this paper, a new design of an inexpensive inductive proximity sensor has been suggested in order to measure high frequency dynamic displacements of metallic specimens in a noncontact manner. Detection of the existing inductive sensors, detection, integral, and amplified through a process to detect the displacement noise due to weak nature of analog circuits and integral factor in the process of displacement detection is slow. The proposed method could be less affected by noise, the analog receive and high-speed signal processing is a new way, because AD converter (Analog to Digital converter) without using the vibration frequency signals directly into digital signals are converted. In order to evaluate the sensing performance, The proposed sensor module using non-contact vibration signals were detected while shaker vibration frequencies from 30Hz to 1,100 Hz at intervals of vibrating metallic specimens. Experimental results, Vibration frequency detection range of the metallic specimins within close proximity to contactless 5mm could be measured from DC to 1,100Hz and vibration amplitude of the resolution was $20{\mu}m$. Therefore, the proposed non-contact inductive sensor module for precision vibration detection sensor is estimated to have sufficient performance.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.144-148
• /
• 2007

레이저 변위 센서를 이용한 비접촉식 표면거칠기 측정 방법에 관하여 접촉식과 비교 평가함으로 신뢰성을 확인하였으며, 비교측정하기 위하여 시편을 제작하고 접촉식 방법과 비접촉식 방법으로 측정하고 비교 분석하였다. 분석 결과 접촉식에 비해 비접촉식의 측정에서의 값은 신뢰할 수준으로 판단되었다.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.10
• /
• pp.137-145
• /
• 2010

This paper is proposed non-contact plant growth measurement system using infrared sensor based on USN(Ubiquitous Sensor Network) technologies. The proposed system has used noncontact sensors to reduce any potential damage when it measures the growth of the plant. In this system, plant growth parameters such as diameter, cross-sectional area and thickening form are measured in real-time non-contact method. The measured data are transmitted to remote server by using sensor network technologies, stored and analyzed at the server, and the analyzed data are finally provided for users. In this paper, the proposed plant growth measurement system has been designed and implemented using non-contact infrared sensor based measurement methods and devices, and its performances have been verified by actual measurement experiments at the fields.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1999.03a
• /
• pp.49-55
• /
• 1999

본 연구에서는 표면처리를 달리한 폴리에스테르/면 교직물에 대한 표면특성의 측정기법을 비교·검토하였다. 시료로는 미처리 직물과 silicone 처리 직물, pu 코팅직물, silicone/pu 처리 직물을 이용하였다. 측정 기법은 비접촉식 방법으로 위치에 따른 직물 표면잔털의 grey scale을 FFT하여 그 대수값의 관계식의 기울기값을 결정하였다. 또한, 레이저 변위센서를 이용한 촉각 측정 장치에 의해 표면 거칠기와 표면마찰 계수를 측정하였다. 접촉식 방법으로는 평판과 직물을 접촉시켜 영상처리에 의해 접촉면적을 정량하고 fractal 차원을 도출하였다. KES-FB system에 의해 표면특성을 측정하였다. 주관적 접촉감각 평가는 표준환경에서 20명의 여성을 대상으로 실시하였고 분석에 ANOVA와 상관분석을 이용하였다. 측정기법에 따른 표면특성치와 주관적 감각평가치의 상관분석 결과, 접촉식 방법인 KES-FB에 의한 방법보다 다른 접촉식 방법인 영상처리에 의한 접촉면적, fractal 차원과 비접촉식 방법인 FFT 분석에 의한 기울기 및 레이저 변위센서에 의한 표면거칠기 결과가 주관적 접촉감각과 더욱 밀접한 관련이 있는 것으로 나타나 접촉 감각을 객관화하는데 보다 타당한 것으로 나타났다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.223-227
• /
• 2014

This paper presents an improvement method for human body sensing module and management system, specifically focused on the human body detection module with ultrasonic sensors to detect the usage of toilets and the management system to control the state of the toilets of the entire building. The proposed human body sensing module consists of the detection sensor to detect the movement of human body and the contact sensor to detect the position in a certain distance. The management system is configured of the control unit to process the signal transmitted from sensors, opening and closing valves according to the sensing signal, and the short range wireless communication unit to save the operational status data as well as transmit the data at regular intervals.