• Journal of Korea Multimedia Society
• /
• v.7 no.4
• /
• pp.518-531
• /
• 2004

This paper discusses a testbed architecture for implementing scalable service differentiation in the Internet. The differentiated services (DiffServ) testbed architecture is based on a model in which a bandwidth broker (BB) can control network resources, and the ALTQ can reserve resources in a router to guarantee a Quality of Service (QoS) for incoming traffic to the testbed. The reservation and releasemessage for the ALTQ is contingent upon a decision message in the BE. The BB has all the information in advance, which is required for a decision message, in the form of PIB. A signaling protocol between the BB and the routers is the COPS protocol proposed at the IETF. In terms of service differentiation, a user should make an SLA in advance, and reserve required bandwidth through an RAR procedure. The SLA and RAR message between a user and the BB has implemented with the COPS extension which was used between a router and the BB. We evaluates the service differentiation for the video streaming in that the EF class traffic shows superb performance than the BE class traffic where is a network congestion. We also present the differentiated service showing a better packet receiving rate, low packet loss, and low delay for the EF class video service.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8B
• /
• pp.681-688
• /
• 2008

In this paper, we propose a new price-based call admission control algorithm for multi-class communication networks. When a call arrives at the network, it informs the network of the number of requested circuits and the minimum amount of time that it will require. The network provides the optimal price for the arrived call with which it tries to maximize its expected revenue. The optimal price is dynamically adjusted based on the information of the arrived call, and the present and the estimated future congestion level of the network during the reservation time of the call. If the call accepts the price, it is admitted. Otherwise, it is rejected. We compare the performance of our dynamic pricing algorithm with that of the static pricing algorithm by Courcoubetis and Reiman [1], and Paschalidis and Tsitsiklis [2]. By the comparison, we show that our dynamic pricing algorithm has better performance aspects such as higher call admission ratio and lower price than the static pricing algorithm, although these two algorithms result in almost the same revenue as shown in [2]. This implies that, in the competitive situation, the dynamic pricing algorithm can attract more users than the static pricing algorithm, generating more revenue. Moreover, we show that if a certain fixed connection fee is introduced to the price for a call, our dynamic pricing algorithm yields more revenue.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.10
• /
• pp.139-147
• /
• 2015

Steady state visual evoked potential (SSVEP) has been actively studied because of its short training time, relatively higher signal-to-noise ratio, and higher information transfer rate. There are two popular analysis methods for SSVEP signals: power spectral density analysis (PSDA) and canonical correlation analysis (CCA). However, the PSDA is known to be vulnerable to noise due to the use of a single channel. Although conventional CCA is more accurate than PSDA, it may not be appropriate for the real-time SSVEP-based BCI system when it has short time window length because it uses sinusoidal signals as references. Therefore, the two methods are not efficient for the real-time BCI system that requires a short TW and a high recognition accuracy. To overcome this limitation of the conventional methods, this paper proposes a frequency recognition method with a combination of CCA and PSDA using the difference between powers of canonical variables obtained from the results of CCA. Experimental results show that the performance of the combination of CCA and PSDA is better than that of CCA for the case of a short TW.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.4
• /
• pp.19-25
• /
• 2017

In the reality that the use of the web is becoming commonplace, the general people are complaining about the inconvenience because they are not standardized when using the web site. Especially, the disabled people such as the social underprivileged classes people suffer from the inconvenience due to the web site that is not accessible. The purpose of this study is to conduct an authentication audit to obtain web accessibility certification mark on the homepage of a specific public institution. Through these practical cases, it is possible to improve the recognition of web accessibility by practitioners or managers, And suggest ways to improve the Aging existing public institution web sites. Although there are a lot of existing literature and previous researches, it is still not being newly produced because of lack of awareness of web accessibility, As a result, the users who access the web site of the public institution for the first time are much inconvenienced. In order to solve this problem, this paper compares the Korean web content accessibility guideline 2.1, revised in April 2015, and verified the effectiveness of the guidelines through web accessibility evaluation of specific public institution sites.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.59-69
• /
• 2018

In this paper, we present a robust beamforming design to tackle the weighted sum-rate maximization (WSRM) problem in a multicell multiple-input multiple-output (MIMO) - non-orthogonal multipleaccess (NOMA) downlink system for 5G wireless communications. This work consider the imperfectchannel state information (CSI) at the base station (BS) by adding uncertainties to channel estimation matrices as the worst-case model i.e., singular value uncertainty model (SVUM). With this observation, the WSRM problem is formulated subject to the transmit power constraints at the BS. The objective problem is known as on-deterministic polynomial (NP) problem which is difficult to solve. We propose an robust beam forming design which establishes on majorization minimization (MM) technique to find the optimal transmit beam forming matrix, as well as efficiently solve the objective problem. In addition, we also propose a joint user clustering and power allocation (JUCPA) algorithm in which the best user pair is selected as a cluster to attain a higher sum-rate. Extensive numerical results are provided to show that the proposed robust beamforming design together with the proposed JUCPA algorithm significantly increases the performance in term of sum-rate as compared with the existing NOMA schemes and the conventional orthogonal multiple access (OMA) scheme.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.5
• /
• pp.1-8
• /
• 2010

Clients require easy to use of product and operating and industry safety according to the change of a market and a factory. For overcoming it, this paper developed controller of take-out robots that take high speed and superprecision and supplement a week point as use the system based on network. development controller classify teaching pendant and center server PC. Center server PC service the information about all process to supervisor. Teaching pendant is the bridge that service various faculties such as control, user recognition, metallic pattern operation to the user using injection molding. The controller development for taking out injection molded body classify software and hardware. The development of software is divided into three step which is application program, user interface and device driver. the simple device driver is not classified and included in application program. The hardware induce the touch panel and wireless network and construct the effective process control and internet connection. The inject ion cycle of existing system was five second but advanced system has the inner four cycle, process efficiency and product operation through wireless network.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.102-112
• /
• 2013

In this paper, two step processing method of contour extraction and complement which contain hexagonal shape for low contrast and noisy images is proposed. This method is based on the combination of Laplacian-Gaussian filter and an idea of filters which are dependent on the shape. At the first step, an algorithm which has six masks as its extractors to extract the hexagonal edges especially in the corners is used. Here, two tricorn filters are used to detect the tricorn joints of hexagons and other four masks are used to enhance the line segments of hexagonal edges. As a natural image, a corneal endothelial cell image which usually has regular hexagonal form is selected. The edge extraction of hexagonal shapes in corneal endothelial cell is important for clinical diagnosis. The proposed algorithm and other conventional methods are applied to noisy hexagonal images to evaluate each efficiency. As a result, this proposed algorithm shows a robustness against noises and better detection ability in the aspects of the output signal to noise ratio, the edge coincidence ratio and the extraction accuracy factor as compared with other conventional methods. At the second step, the lacking part of the thinned image by an energy minimum algorithm is complemented, and then the area and distribution of cells which give necessary information for medical diagnosis are computed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.9 s.351
• /
• pp.32-39
• /
• 2006

5.8GHz DSRC(Dedicated Short Range Communications) is a short to medium range communications service that supports both public safety and private operations in roadside to vehicle and vehicle communication. However the 5.8GHz frequency may cause the shadowing effect or communication blocking problem when there is an obstacle or another vehicle between RSE (Road Side Equipment) and OBE (On Board Equipment). In this paper, to solve this problem of the 5.8GHz DSRC, we propose a relay protocol based on the standard of DSRC radio communication between RSE and OBE in the 5.8GHz band made by TTA (Telecommunication Technology Association). By using the proposed relay protocol to DSRC system and intervehicle communication, we also consider a fixed relay protocol and mobile relay protocol. We expect to apply this relay protocol for the DSRC intervehicle communication and video communication between drivers and safe distance among vehicles in the near future.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.6 s.312
• /
• pp.61-67
• /
• 2006

In this paper it was introduced that embedded RFID Reader /Writer system including PXA255 ARM chip which enables the Tag signal to be used by data and video processing via IEEE 802.11 communication protocol. Embedded RFID R/W middle ware was developed which transmit the searched result in the data base using the received Tag signal via IEEE 802.11 communication protocol. Developed embedded RFID R/W system was composed of three parts - PXA255 ARM chid (Core Part) 13.56 MHz RFID Reader /Writer, wireless LAN for data communication with server and TFT-LCD terminal. Once this system receives the Tag signal through the serial port, it transmits the data through the wireless LAN to the server and it displays the received image data which was processed by the server onto the TFT-LCD screen. Embedded RFID R/W Middle ware transmits the received Tag signal from RFID R/W to the embedded system, which activates the socket program to connect to the window server via IEEE 802.11 communication protocol and transmits the Tag signal. Window server program searches the Database using this Tag information and displays the result on to the TFT-LCD window in the embedded system via IEEE 802.11 protocol.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.4
• /
• pp.321-329
• /
• 2013

Despite the advantage of unlimited access, there are insufficient studies for the accuracy and stability of FKP that blocks the spread of the system for various applications. Therefore, we performed a long-term analysis from continuous real-time positioning, and investigated the error characteristics dependent on the size and the surrounding environment. The FKP shows significant changes in the positioning accuracy at different times of day, where the accuracy during daytime is worse than that of nighttime. In addition, the size and deviation of FKP correction may change with the ionospheric conditions, and high correlation between ambiguity resolution rate and the deviation of correction was observed. The receivers continuously request the correction information in order to cope with sudden variability of ionosphere. On the other hand, the correction information was not received up to an hour in case of stable ionospheric condition. It is noteworthy that the outliers of FKP are clustered in their position with some biases. Since several meters of errors can be occurred for kinematic positioning with FKP, therefore, it is necessary to make appropriate preparation for real-time applications.