• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.3
• /
• pp.249-255
• /
• 2017

The finger vein recognition technology is a method to acquire a finger vein image by illuminating infrared light to the finger and to authenticate a person through processes such as feature extraction and matching. In order to recognize a finger vein, a 2D mask-based two-dimensional convolution method can be used to detect a finger edge but it takes too much computation time when it is applied to a low cost micro-processor or micro-controller. To solve this problem and improve the recognition rate, this study proposed an extraction method for the region of interest based on virtual core points and moving average filtering based on the threshold and absolute value of difference between pixels without using 2D convolution and 2D masks. To evaluate the performance of the proposed method, 600 finger vein images were used to compare the edge extraction speed and accuracy of ROI extraction between the proposed method and existing methods. The comparison result showed that a processing speed of the proposed method was at least twice faster than those of the existing methods and the accuracy of ROI extraction was 6% higher than those of the existing methods. From the results, the proposed method is expected to have high processing speed and high recognition rate when it is applied to inexpensive microprocessors.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2006.05a
• /
• pp.146-151
• /
• 2006

현재 국가지리정보유통망을 통해 유통되고 있는 수치지도(Digital map)는 대부분 항공 측량사진(Air survey Photographs)이나 위성영상(Satellite images)을 통해 취득된 토지 피복의 형상을 기반으로 제작된 지도들이다. 정사사진으로부터 취득된 지형정보를 기호화, 단순화한 수치지도는 실제 사물의 형태와 많은 차이가 있어 지형과 시설물의 변이를 사실대로 반영하지 못한다. 특히 최근 들어 지하시설물이나 건축기술의 발달로 층별 구조가 다양해진 건축물의 형태 등은 정사사진으로는 식별이 불가능하고 건물의 경우 지붕의 형태로 묘사되는 등 표현에 한계가 있다. 도심지역을 대상으로 제작된 1/1,000수치지형도나 일부 지자체나 공공기관 등에서 제작된 $1/500{\sim}1/2,500$ 수치지형도는 상세한 지형정보를 포함하고 있는 높은 정밀도의 수치지도이지만, 도시지역의 변이가 빠르게 일어나고 있기 때문에 자료 신뢰성과 최신성을 유지하는데 한계가 있다. 따라서 본 연구는 현지조사나 측량에 의존하고 있는 정사사진으로부터 취득이 불가능한 지형자료의 취득이나 수년단위인 갱신주기의 한계를 극복하고 실시간으로 수치지도를 수정갱신 할 수 있는 대안으로 일반측량성과도의 활용방안을 제시하고자 한다. 일반측량업에서 생산되는 일반측량성과도는 임시 도근점에 의해 측량을 실시하고 지적경계점과 현황기지점을 도해법에 의해 지적도와 중첩시켜 제작한 측량도로서, 일반측량 성과도에 절대좌표체계를 부여하고 수치지도와 매칭 기법을 제시함으로서 경제적이고 신속한 실시간 수치지도 수정갱신체계를 확립할 수 있고, 자료의 공유함으로써 중복측량을 방지할 수 있다.보 등)를 활용, 구축된다. 교통분석용 네트워크는 구축시점에 따라 현재 및 장래 네트워크로 구분되며 장래 네트워크는 기준년도부터 2031년까지 5년 단위로 계획된 장래도로를 반영하여 구축된다. 교통주제도 및 교통분석용 네트워크는 국가교통DB구축사업을 통해 구축된 자료로서 교통체계효율화법 제9조의4에 따라 공공기관이 교통정책 및 계획수립 등에 활용할 수 있도록 제공하고 있다. 건설교통부의 승인절차를 거쳐 제공하며 활용 후에는 갱신자료 및 활용결과를 통보하는 과정을 거치도록 되어있다. 교통주제도는 국가의 교통정책결정과 관련분야의 기초자료로서 다양하게 활용되고 있으며, 특히 ITS 노드/링크 기본지도로 활용되는 등 교통 분야의 중요한 지리정보로서 구축되고 있다..20{\pm}0.37L$, 72시간에 $1.33{\pm}0.33L$로 유의한 차이를 보였으므로(F=6.153, P=0.004), 술 후 폐환기능 회복에 효과가 있다. 4) 실험군과 대조군의 수술 후 노력성 폐활량은 수술 후 72시간에서 실험군이 $1.90{\pm}0.61L$, 대조군이 $1.51{\pm}0.38L$로 유의한 차이를 보였다(t=2.620, P=0.013). 5) 실험군과 대조군의 수술 후 일초 노력성 호기량은 수술 후 24시간에서 $1.33{\pm}0.56L,\;1.00{\ge}0.28L$로 유의한 차이를 보였고(t=2.530, P=0.017), 술 후 72시간에서 $1.72{\pm}0.65L,\;1.33{\pm}0.3L$로 유의한 차이를 보였다(t=2.540, P=0.016). 6) 대상자의

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.3
• /
• pp.167-179
• /
• 2012

This research is brought to suggest the policy paradigm shift alternative and to show breakthrough by diagnosing the cons of government's current youth entrepreneurship promotion emphasizing a showup performance. More specific points, first, this paper investigate the policy limitations of government's current youth entrepreneurship promotion. Second, this paper develop upgrade model of youth entrepreneurship promotion through benchmarking the foreign successful cases. Third, this paper suggest, the alternative of taking off ver 1.0 of government's current youth entrepreneurship promotion policy paradigm, new paradigm of government policy emphasizing 'Good Quality Youth Startup.' In this research, youth entrepreneurship promotion policy should be emphasized that the implementation of the "open" system. Open systems can collaborate in the young founder of the market building, matching based entrepreneurship run in conjunction with enough experience and the founder of the startup entirely after reviewing the market, or starting to reconsider, and also will open the path be employed in the leading venture firms participating in the group market. Therefore, entrepreneurship promotion policy raising the capabilities of the current situation of young people in the business after graduating from a wide selection of alternative plan that is characterized by a large system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.168-175
• /
• 2013

Color consistency in stereoscopic contents is important for 3D display systems. Even with a stereo camera of the same model and with the same hardware settings, complex color discrepancies occur when acquiring high quality stereo images. In this paper, we propose an integrated color matching method that use cumulative histogram in global matching and estimated 3D-distance for the stage of local matching. The distance between the current pixel and the target local region is computed using depth information and the spatial distance in the 2D image plane. The 3D-distance is then used to determine the similarity between the current pixel and the target local region. The overall algorithm is described as follow; First, the cumulative histogram matching is introduced for reducing global color discrepancies. Then, the proposed local color matching is established for reducing local discrepancies. Finally, a weight-based combination of global and local matching is computed. Experimental results show the proposed algorithm has improved global and local error correction performance for stereoscopic contents with respect to other approaches.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.11
• /
• pp.91-99
• /
• 2010

Recently, recognizing user resource for personalized service has been needed in digital content service fields. Especially, to analyze user taste, recommend music and service music related information need recognition of user music file in case of online music service. Music related information service is offered through recognizing user music based on tag information. Recognition error has grown by weak points like changing and removing of tag information. Techniques of content based user music recognition with music signal itself are researched for solving upper problems. In this paper, we propose user music recognition on the internet by extracted feature from music signal. Features are extracted after suitable preprocessing for structure of content based user music recognition. Recognizing on music server consist of feature form are progressed with extracted feature. Through this, user music can be recognized independently of tag data. 600 music was collected and converted to each 5 music qualities for proving of proposed recognition. Converted 3000 experiment music on this method is used for recognition experiment on music server including 300,000 music. Average of recognition ratio was 85%. Weak points of tag based music recognition were overcome through proposed content based music recognition. Recognition performance of proposed method show a possibility that can be adapt to online music service in practice.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.2
• /
• pp.65-72
• /
• 2015

Performance tests of a turbopump for the developing 7-tonf liquid rocket engine were conducted. The performance of turbopump components and their power matching were measured and examined firstly under the LN2 and water environment. In the real propellant(LOX and kerosene) environment tests, design and off-design performances of turbopump were fully verified. During the off-design tests, turbopump running time was set the same as engine operating time and pump inlet pressure were set lower than nominal operating value in order to investigate pump suction capability. It have been verified that subject turbopump satisfies required performance - flow rate, head, suction performance and operational time - in the operating regime of developing liquid rocket engine.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.161-168
• /
• 2007

Web attack uses structural, logical and coding error or web application rather than vulnerability to Web server itself. According to the Open Web Application Security Project (OWASP) published about ten types of the web application vulnerability to show the causes of hacking, the risk of hacking and the severity of damage are well known. The detection ability and response is important to deal with web hacking. Filtering methods like pattern matching and code modification are used for defense but these methods can not detect new types of attacks. Also though the security unit product like IDS or web application firewall can be used, these require a lot of money and efforts to operate and maintain, and security unit product is likely to generate false positive detection. In this research profiling method that attracts the structure of web application and the attributes of input parameters such as types and length is used, and by installing structural database of web application in advance it is possible that the lack of the validation of user input value check and the verification and attack detection is solved through using profiling identifier of database against illegal request. Integral security management system has been used in most institutes. Therefore even if additional unit security product is not applied, attacks against the web application will be able to be detected by showing the model, which the security monitoring log gathering agent of the integral security management system and the function of the detection of web application attack are combined.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.3
• /
• pp.299-304
• /
• 2021

Purpose. The purpose of the present study was to investigate the effects of image matching experience of operators on the accuracy and working time of image registration between radiographic and optical scan images. Materials and methods. Computed tomography and optical scan of a dentate dental arch were obtained. Image matching between the computed tomography and the optical scan (IDC S1, Amann Girrbach, Koblah, Austria) was performed using the point-based automatic registration method in planning software programs (Implant Studio, 3Shape, Copenhagen, Denmark) using two different experience conditions on image registration: experienced group and inexperienced group (n = 15 per group, N = 30). The accuracy of image registration in each group was evaluated by measuring linear discrepancies between matched images, and working time was recorded. Independent t test was used to statistically analyze the result data (α = .05). Results. In the linear deviation, no statistically significant difference was found between the experienced and inexperienced groups. Meanwhile, the working time for image registration was significantly shorter in the experienced group than in the inexperienced group (P = .007). Conclusion. Difference in the image matching experience may not influence the accuracy of image registration of optical scan to computed tomography when the point-based automatic registration was used, but affect the working time for the image registration.

• Korean Association of Arts Management
• /
• no.53
• /
• pp.207-247
• /
• 2020

is a project for the senior generation with humanistic knowledge to become a mentor and communicate with them to present the wisdom and direction of life to the new generations of mentees based on various life experiences. has been expanding since 2015, starting with the pilot operation in 2014. In general, projects such as these are assessed to establish effectiveness indicators to verify effectiveness and to establish project management and development strategies. However, most of the evaluations have been conducted quantitatively and qualitatively based on the short-term duration of the project. Therefore, in the case of continuous projects such as , especially in the field of culture and arts where long-term effectiveness verification is required, the short-term evaluation is difficult to predict and judge the actual meaningful effects. In this regard, tried to examine the qualitative change of key participants in this project through the 2017 and 2018 image tracking survey. For this purpose, we adopted qualitative research methodology through interview video shooting, field shooting, and value coding as a research method suitable for the research subject. To analyze the results, first, the interview images were transcribed, keywords were extracted, value encoding works were matched with human psychological values, and the theoretical method was used to identify changes and to derive the meaning. In fact, despite the fact that the study conducted in this study was a follow-up survey, it remained a limitation that it analyzed the changed pattern in a rather short time of 2 years. However, this study systemized the specific methodology that researchers should conduct for follow-up and provided the flow of research at the present time when there is hardly a model for follow-up in the field of culture and arts education business in Korea as well as abroad. Significance can be derived from this point. In addition, it can be said that it has great significance in preparing the detailed system and case of comparative analysis methodology through value coding.

• Journal of Intelligence and Information Systems
• /
• v.28 no.2
• /
• pp.57-74
• /
• 2022

Recently, artificial intelligence parking control systems have increased the recognition rate of vehicle license plates using deep learning, but there is a problem that they cannot determine vehicles with fake license plates. Despite these security problems, several institutions have been using the existing system so far. For example, in an experiment using a counterfeit license plate, there are cases of successful entry into major government agencies. This paper proposes an improved system over the existing artificial intelligence parking control system to prevent vehicles with such fake license plates from entering. The proposed method is to use the degree of matching of the front feature points of the vehicle as a passing criterion using the ORB algorithm that extracts information on feature points characterized by an image, just as the existing system uses the matching of vehicle license plates as a passing criterion. In addition, a procedure for checking whether a vehicle exists inside was included in the proposed system to prevent the entry of the same type of vehicle with a fake license plate. As a result of the experiment, it showed the improved performance in identifying vehicles with fake license plates compared to the existing system. These results confirmed that the methods proposed in this paper could be applied to the existing parking control system while taking the flow of the original artificial intelligence parking control system to prevent vehicles with fake license plates from entering.