• Applied Biological Chemistry
• /
• v.48 no.2
• /
• pp.183-188
• /
• 2005

This study was conducted to develop a method for the quantitative determination of soil clay content by spectophotometry. The optimum wavelength obtained with reference clay minerals for spectrophotometry was 500 nm. For the proposed spectrophotometry, 0.5 g of soil sample was put in the 250 ml Erlenmeyer flask and 100 ml dispersing agent was added. After shaking the flask at 130 rpm with a mechanical shaker overnight, the flask was removed from the shaker and was shaken up-and-down for 30 seconds. With a micro-pipet, 4 ml of the suspension was transferred into the previously-inserted cell and the absorbance was measured instantly. Results by the spectrophotometry for clay content analysis were compared with those by the conventional sedimentation technique (the pipet method). The proposed equation was $y\;=\;38.03x_1-0.17x_2-1.17$, where y, $x_1$, and $x_2$ were clay content (%) by the pipet method, water content corrected clay content (%) by spectrophotometry, and organic matter content ($g{\cdot}kg^{-1}$), respectively. The regression coefficient for the equation was $r\;=\;0.984^{**}$, indicating highly significant correlation between the results of the two methods.

• Applied Biological Chemistry
• /
• v.49 no.2
• /
• pp.153-157
• /
• 2006

Accuracy and precision of the spectrophotometeric analysis of clay content in soils were estimated by comparison with the conventional pipet method. Clay contents in 25 soil samples of various physico-chemical properties including texture were determined by spectrophotometry and pipet methods, and the two sets of data an clay content were compared by several statistical analyses. The correlation between clay contents determined by spectrophotometry and pipet methods was highly significant. The regression coefficient was $0.98^{**}$ and the slope of regression equation was close to 1.0. The standard deviation and CV of clay contents measured by spectorphotometry were smaller than those found in the data of clay contents obtained by pipet method. In conclusion, compared to the conventional pipet method, spectrophotometry was a rapid, convenient, accurate and precise method for the measurement of clay content in soils.

• Nuclear Engineering and Technology
• /
• v.26 no.1
• /
• pp.54-62
• /
• 1994

The hydraulic properties of domestic natural clay/crushed rock mixture suggested as a candidate backfill material for the low and intermediate level waste repository were investigated. The dry density-water content relationship was studied to define an optimum water content that gives a maximum attainable dry density at constant compaction pressure. The hydraulic conductivities of clay/crushed rock mixture as a function of clay content were also measured. As the clay content decreased, the maximum attainable dry density increased and the optimum water content became more distinct. However the attainable density is not significantly sensitive to water content. The hydraulic conductivities of the mixture increased from 5 $\times$ 10$^{-12}$ m/s to 7 $\times$ 10$^{-10}$ m/s with clay content decreasing from 100 wt.% to 25 wt.% at dry density of 1.2 Mg/㎥. In case of dry density of 1.5 Mg/㎥, they maintain the lower values of 5 $\times$ 10$^{-12}$ m/s even at 25 wt.% clay content. The concept of effective clay dry density was suggested to estimate the hydraulic conductivity of the mixture. It was shown that the effective clay dry density concept can explain welt the hydraulic conductivities of the mixtures with various dry density and crushed rock content.

• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.4
• /
• pp.301-304
• /
• 1983

Effects of the clay content on soil chemical properties and rice productivity were studied to evaluate the optimum range of clay content from 42 NPK trials conducted by the provincial ORD in 1979. Nutrients content and CEC of the paddy soils were increased with the increase of clay content in paddy soils. Rice yields without NPK application showed a positive linear regression with respect to surface clay content in the paddies, while the relationship between rice yield and clay content with optimun fertilization showed a curvilinear regression, which indicated the maximum yield was observed in loam soils. However, the yield of rice was not significantly different in the range of clay content from 14 to 38%. It implies that the clay content more than 15% may be secondary constraint in determining the soil productivity.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.5
• /
• pp.293-303
• /
• 2004

This experiment was conducted to investigate the direction or orientation of clay particle movement in argillic horizons (Bt) for clarifying the soil classification of soils. Soil samples were collected from 22 soil series containing Bt horizons. Physical and chemical characteristics and mineral and chemical compositions of clay in the soils were analyzed. Micoromorphological characteristics of the Bt horizons were also investigated with thin sections of the natural undisturbed and oriented soil samples. Average clay content in the Bt horizons was 28% and 1.33 times higher comparing to that in the surface layer. Soil pH was higher, but cation exchange capacity (CEC) and organic matter content were lower in Bt horizon than those in the surface layer. There was an evidence of clay accumulation in Bt horizons of all soil series examined except Bangog series. Although there was an increase of clay content in the horizons in Bangog series, the clay was not originated from illuviation process. The translocation of clay was in the order of an 2:1 expandable clay minerals > 2:1 non-expandable clay minerals > 1:1 clay minerals. The illuvial substances in argillic horizon were composed with clay, amorphous iron and opaque mineral. The micoromorphological features of Bt horizon were void coating, channel infilling and grain coating. There was an apparent boundary between clay coating and the groundmass in residuum and colluvium, but Bt horizon of alluvium was composed of a skew plane amputated by the physical operation.

• Polymer(Korea)
• /
• v.30 no.6
• /
• pp.545-549
• /
• 2006

Blends of poly(acrylic acid- co-maleic acid) (PAM) with poly (vinyl alcohol) (PVA) were pre -pared in distilled water PVA/PAM/saponite (PVA/PAM/SPT) nanocomposite films were prepared with various clay contents by using the solution intercalation method. The variations of the dispersion, morphology, and thermo-mechanical properties of the nanocomposites with clay content in the range 0 to 9 wt% were examined. Up to 3 wt% clay loading, the clay particles were homogeneously dispersed in the PVA/PAM blends. However, some agglomerated structures form in the polymer matrix above a clay content of 7 wt%. The thermal stability of the hybrids was increased linearly with increasing the clay loading up to 9 wt%. The maximum strength and modulus were obtained at a clay content of 7 wt%. Thus, the addition of small amounts of clay to the PVA/PAM blends produced PVA/PAM nano-composites with improved the thermo-mechanical properties.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.5
• /
• pp.315-320
• /
• 2006

A precision test of hydrometer method, used to determine soil texture, was conducted on selected 10 soil samples, compared to pipette method. Soil texture measurements with hydrometer method were performed with monitoring the temperature of soil suspension in settling cylinder. The temperature and its fluctuation during settling time had a range of $13^{\circ}C-28^{\circ}C$ and $0.2^{\circ}C-4.4^{\circ}C$, respectively. The difference of clay content between hydrometer and pipette method were distributed from -6.4% to 4.0%. Positive end of difference in clay content was observed at soil having very low clay content, whereas negative end at soil having high organic matter content and exchangeable cations. Except both ends, difference in clay content of soils was less than 3%, and expecially closed to 0% in soils having clay content more than 25%. The difference of sand content were distributed from -1.5% to 4.2%. Similar to clay content, positive end soil was soil sample having lowest sand content.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.2
• /
• pp.93-107
• /
• 2005

The estuary of Nakdong River area including Noksan industrial complex and Busan New Port is composed of thick unconsolidified sediments containing abundant clay, and thus is a potential hazardous area of ground subsidence. We analyzed mineral compositions and geotechnical properties of the clay sediments that sampled from 4 boreholes of the area, and examined vertical variations and their correlations. The results showed correlations between some mineral constituents and geotechnical properties of clay sediments. A positive correlation showed between quartz content and wet unit weight, whereas a negative correlation showed between quartz content and liquid limit. Feldspar content and water content showed a negative correlation, whereas content of clay minerals and liquid limit showed a positive correlation. And also, there is a negative correlation between content of clay minerals and wet unit weight. Correlation equations are obtained from the multiple regression analyses among plastic index, content of clay mineral, smectite and clay fraction.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.1
• /
• pp.15-23
• /
• 2010

The absolute clay mineral compositions and regional distribution of the 131 bulk marine surface sediments around the Jeju Island was compared to their relative compositions and distribution using quantitative X-ray diffraction analysis. Average absolute clay mineral composition is illite 15.3% (0.5~40.5%), chlorite 2.6% (0~7.9%), and kaolinite 1% (0~5.6%). Total contents of the clay minerals are very high in the South Sea of Korea, northwestern part and southern offshore of Jeju Island. The average relative composition is illite 70.9% (16.7~89%), chlorite 21.5% (8.4~68.5%), and kaolinite 7.6% (0~29.3%). Relative illite contents are high in the northwestern and southeastern part of study area, and southern part of Jeju Island. Chlorite contents are high in the eastern part of study area and western part of Jeju Island. Kaolinite contents are high in the western and southern part of Jeju Island, and southern offshore of Jeju Isand. Absolute Distribution patterns are very similar to those of fine-grained (from clay to silt) sediment, whereas relative distribution patterns do not show any relationship with those of fine-grained sediment.

• Nuclear Engineering and Technology
• /
• v.27 no.4
• /
• pp.582-590
• /
• 1995

우리 나라에서 건설될 중저준위폐기물 처분장의 기본설계개념에 따르면, 중준위폐기물 동굴에는 점토질 뒷채움재가 설치될 예정이다. 이 뒷채움재의 후보물질로는 원료 입수의 용이성 및 경제성 측면에서 천연점토와 분쇄암석의 혼합물이 고려되고 있다. 그러나 이 혼합물이 폐기물처분장의 뒷채움재로 사용되기 위해서는 주요특성들이 뒷채움재의 요구사항을 만족시켜야한다. 이 보고서에서는 경상북도 연일지역에서 산출되는 천연점토와 분쇄암석 혼합물에 대해 핵종유출저지 관점에서 가장 중요한 특성인 수리특성과 방사성핵종 확산특성 및 역학적 특성을 측정하여 뒷채움재료로서의 사용 가능성을 평가하였다. 혼합물의 수리전도도는 동일 밀도에서 점토함량이 감소함에 따라 증가되었으나, 점토함량이 적은 경우에도 상당히 낮은 값을 유지하여 뒷채움재를 통한 핵종이동의 주요 메커니즘은 확산이 될 것이라는 것을 보여주었다. 압축점토에 대한 방사성핵종 복산계수 측정결과, 동일밀도의 나트륨벤토나이트에서 측정된 값의 범위 내에 있었으며, 점토-분쇄암석 혼합물의 액소성한계, 다짐특성, 압축강도및 압밀계수등의 역학적 특성도 나트륨벤토나이트-모래 혼합물에서 얻어진 값과 유사하였다. 이러한 결과들로부터 연일산 천연점토-분채암석 혼합물을 고가의 나트륨벤토나이트 대용으로 처분장 뒷채움재로 사용할 수 있다는 것을 알 수 있었다.