• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.246-249
• /
• 2008

IGCC (석탄가스화 복합발전) 시스템 공정 중 가스화기에서 발생되는 합성가스 내에는 높은 농도의 분진들이 함유되어 있기 때문에 하부 공정들을 보호하기 위해서는 가스화기 후단에 집진장치가 필히 설치되어야 한다. 집진장치의 설계 제작 운전에 있어서 점착성 분진층 부착,분진 브리징, 필터 파손 현상 등과 같은 다양한 문제점들로 인하여 고온의 합성가스를 처리하는 데는 아직 기술적 한계들이 산재해 있는 상황이다. 이와 같은 문제점들은 필터에 부착된 분진층의 탈진성능을 향상시키거나, 필터의 열피로를 줄일 수 있도록 필터 재생을 위한 탈진의 횟수를 줄이는 방법을 통하여 해결될 수 있다. 본 연구에서는 파일롯 규모의 IGCC용 세라믹캔들필터 집진장치에서의 가스 유입 및 탈진 조건에 따른 집진장치의 차압 특성 변화를 수치해석과 실험을 통하여 분석함으로써 탈진성능을 향상시킬 수 있는 조건과 탈진 횟수를 최소화시킬 수 있는 방안을 도출하고자 하였다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.125-128
• /
• 2007

The problem of water leakage due to damaging waterproof in concrete structure, causes the impediment in a long term and shortened the life span of durability. There are a lot of techniques for repair and reinforcement to improve using environment. However, the improper construction which is unconsidered various environmental conditions, could effect to increase the maintenance expenses. Therefore, this study will be compared and estimated the adhesion liquid and sheet integrate waterproofing material, as analyzing the existing problem. For those result, we would like to arrange the alterative plan for the long durability and user needs of concrete structure.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 한국식품저장유통학회 2003년도 제23차 추계총회 및 국제학술심포지움
• /
• pp.215.1-215
• /
• 2003

Bacillus polymyxa No. 26이 생산하는 생전분 당화형 $\beta$-amylase를 쌀가루 반죽시 첨가하여 45$^{\circ}C$에 5시간 둔 후 증자하여 제조한 절편을 4$^{\circ}C$ 저온실에 40시간 동안 저장하면서 기계적 검사와 관능검사에 의하여 물성과 맛을 측정하고 효소 무 첨가의 경우와 비교하여 노화억제 효과를 조사하였다. 기계적 검사시 효소 무 첨가구의 경우는 40시간까지도 굳지 않아 노화되지 않았으며, 경도, 점착성, 씹힘성에서도 큰 차이를 보였다. 관능검사시에도 경도, 촉촉함성, 단맛에 있어서 효소 첨가효과가 크게 나타났으며 떡의 제조 시 효소의 이용으로 설탕첨가를 생략할 수 있고 소화성과 맛을 좋게하므로서 품질을 향상시킬 수 있었다.

• Aerospace Engineering and Technology
• /
• 제1권1호
• /
• pp.128-134
• /
• 2002

Outer surfaces of KSR-III are insulated to protect outer structure and inner payloads from the aerodynamic heating. The characteristics of insulation material (BMS 10-102), selected through careful tests and thermal analyses, are low heat transfer rate and low density. It is applied in a wet and continuous spray pattern for outer surfaces of KSR-III. In the present study, the honeycomb sandwich structure of nose fairing, which is one of the typical multi-layer structures of KSR-III, is thermally analyzed with insulation.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.224-228
• /
• 2002

To study the trafficability on soft and cohesive benthic terrain, a soil bin is designed and constructed. The information of shear strength of pacific seafloor and the results of dimensional analysis of vehicle-train system are used as basic datum for concept design of soil bin. Cohesive benthic terrain is modeled by means of bentonite-water mixture. The shear strength of the mixture is measured by motorized shear meter. Several facilities are constructed for mixing and evening modeled soil, transporting vehicle model. The shear strength in soil bin is investigated for depth, age and velocity. The result of this study is used as basic information to the experiment, study for development of crawler on benthic terrain.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.116-120
• /
• 2003

To study the trafficability on soft and cohesive benthic terrain, a tracked vehicle model($670mm(L){\times}750mm(B_c)$) is designed and tested. The pitch and chevron angle of grouser, weight and center of gravity of vehicle, and drawbar pull force are chosen as experimental variables. Slip, sinkage and inclined angle of vehicle are picked as performance values. Strength of soil is considered as noise factor. A preliminary straight-line motion test is performed. Then, DOE(Design of Experiment) is discussed for further research.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제35권4호
• /
• pp.23-33
• /
• 2003

The possibility of real time analysis about hot melt resins and pressure sensitive adhesives in newsprint stock was investigated by performing comparative tests using conventional image analysis method and real time contaminants analyzer. Based on the test results, the performance of real time contaminants analyzer in terms of detecting primary stickies in newsprint stock could be verified. Real time stickies analysis showed good precision and over-estimation of hot melt resins and under-estimation of pressure sensitive adhesives could be corrected by adapting new method. Real time analysis of primary stickies in the actual newsprint stock also showed good correlation with conventional image analysis and the performance of real time contaminants analyzer could be verified again. Adjustment of the contrast sensitivity of real time contaminants analyzer was enough to set the proper monitoring conditions for primary stickies in newsprint stock.

• Elastomers and Composites
• /
• 제3권1호
• /
• pp.62-74
• /
• 1968

천연(天然)고무 및 합성(合成) 고(高) cis 1 : 4 polyisoprene, 대표적(代表的)으로 'Natsyn 400'의 가공(加工), 배합(配合) 또는 가황체(加黃體)의 성질(性質)들의 차이점(差異點)들에 대(對)하여 설명(說明)하였다. 합성중합체(合成重合體)는 미리 소연(素鍊)함이 없이 충전제(充塡劑)를 첨가(添加)함으로서 가공(加工)이 용역(容易)하였으며 CV형(形) 천연(天然)고무에 있어서도 이점(利點)이 나타났다. 천연(天然)고무 배합물(配合物)은 점착성(粘着性)이 좋으며, 특(特)히 미가황물(未加黃物)의 강도(强度)가 현저(顯著)하게 우수(優秀)하다. 가황과정(加黃過程) 및 몇몇가황체(加黃體)의 성질(性質)에 있어서의 차이(差異)는 비(非)고무질(質)을 함유(含有)하지 않는 Natsyn으로 나타난다. 기타(其他)의 가황체성질(加黃體性質)의 차이(差異)는 천연(天然)고무에 있어서 그 가황체(加黃體)가 인장시(引張時)에 결정(結晶)하는 경향(傾向)을 크게 나타내고 있고 특(特)히 고온(高溫)에서 이들 차이(差異)가 현저(顯著)하다.

• Korean journal of applied entomology
• /
• 제18권4호
• /
• pp.153-160
• /
• 1979

The present experiments were carried out to reduce the population density of adult pine gall midge, Thecodiplosis japonensi,s UCHIDA et INOUYE, by means of spray the sticky agent C-4, on the ground, herbacious plantation and foliar leaf of pine trees at Sanbonli,. Anyang, Kyungido. And also the 3 periods of treatment, such as before 2 weeks( I ), before 1 week (II) from the peak emergence period and peak emergence period (III) were applied. The experimental results obtained were as follows. (1) The formula of selected sticky agent C-4 was $70\%$ of castor oil, $25\%$ of damar resin and $5\%$ of carnauba wax, and it showed the best both on stickiness and duration, and lower phytotoxicity to the host plant. (2) The reduction of population densities of the adult PGM were $68\%$ and 78f: in the G-I and G-II treatment plot respectively, which compared to control, on the ground spray. (3) And the reduction of population densities were $63\%$ and about $90\%$ in the P-I and P-II plot respectively when the agent was sprayed on the herbacious plantation. (4) The rates of gall formation were $32.8\%,\;40.8\%\;and\;59.4\%$ in the spray plots of F-I, F-II, and F-III respectively, and there was no significant difference among the upper, middle and lower parts of the treated host plant in the rates of gall formation. (5) The effective stage of sticky agent application were considered as before one week from the peak emergence period in tile all types of treatment.

• Journal of the Mineralogical Society of Korea
• /
• 제28권2호
• /
• pp.109-126
• /
• 2015

Because fault gouge developed at the center of fault is recognized as one of the most important weak sites, it is evident that clay mineralogy and physical properties greatly affect the rock stability. The purpose of this study is to establish the relationship of mineralogy and physical factors that control rock stability in fault zones. We analyzed a total of 51 samples from 16 main faults which were selected from a Korea fracture map, using XRD, SEM, and physical analyses like unit weight, friction and cohesion properties. Though it is considered that the most common clay minerals comprising fault gouge are kaolinite, illite and smectite, clay mineralogy slightly varies depending on lithology: illite > smectite > kaolinite and chlorite in volcanic rocks, kaolinite and chlorite > illite > smectite in sedimentary rocks, and illite > smectite > kaolinite and chlorite in abundance, respectively. Friction angle decreases with increasing clay content. Cohesion increases with increasing clay content below the 45 % region while it decreases with increasing clay content at the region higher than 45%, with some scatters in the data. It is likely that these results are ascribed to the physical heterogeneity of fault gouges with varying content of different clay minerals.