Browse > Article
http://dx.doi.org/10.9727/jmsk.2015.28.2.109

A Study on Mineralogical and Basic Mechanical Properties of Fault Gouges in 16 Faults, Korea  

Moon, Seong-Woo (Department of Earth and Environmental Sciences, Chungbuk National University)
Yun, Hyun-Seok (Department of Earth and Environmental Sciences, Chungbuk National University)
Choo, Chang Oh (Department of Geology)
Kim, Woo-Seok (Geotechnical Engineering Research Division)
Seo, Yong-Seok (Department of Earth and Environmental Sciences, Chungbuk National University)
Publication Information
Journal of the Mineralogical Society of Korea / v.28, no.2, 2015 , pp. 109-126 More about this Journal
Abstract
Because fault gouge developed at the center of fault is recognized as one of the most important weak sites, it is evident that clay mineralogy and physical properties greatly affect the rock stability. The purpose of this study is to establish the relationship of mineralogy and physical factors that control rock stability in fault zones. We analyzed a total of 51 samples from 16 main faults which were selected from a Korea fracture map, using XRD, SEM, and physical analyses like unit weight, friction and cohesion properties. Though it is considered that the most common clay minerals comprising fault gouge are kaolinite, illite and smectite, clay mineralogy slightly varies depending on lithology: illite > smectite > kaolinite and chlorite in volcanic rocks, kaolinite and chlorite > illite > smectite in sedimentary rocks, and illite > smectite > kaolinite and chlorite in abundance, respectively. Friction angle decreases with increasing clay content. Cohesion increases with increasing clay content below the 45 % region while it decreases with increasing clay content at the region higher than 45%, with some scatters in the data. It is likely that these results are ascribed to the physical heterogeneity of fault gouges with varying content of different clay minerals.
Keywords
Fault gouge; fault; clay minerals; unit weight; friction angle; cohesion;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 Bense, F.A., Wemmer, K., Lobens, S., and Siegesmund, S. (2014) Fault gouge analyses: K-Ar illite dating, clay mineralogy and tectonic significance-a study from the Sierras Pampeanas, Argentina. International Journal of Earth Sciences, 103, 189-218.   DOI   ScienceOn
2 Caine, J.S., Bruhn, R.L., and Forster, C.B. (2010) Internal structure, fault rocks, and inferences regarding deformation, fluid flow, and mineralization in the seismogenic Stillwater normal fault, Dixie Valley, Nevada. Journal of Structural Geology 32, 1576-1589.   DOI   ScienceOn
3 Caine, J.S., Evans, J.P., and Forster, C.B. (1996) Fault zone architecture and permeability structure. Geology, 24, 1025-1028.   DOI
4 Chang, T.W. and Choo, C.O. (1998) Formation processes of fault gouges and their K-Ar ages along the Dongrae fault. The Journal of Engineering Geology, 8, 175-188 (in Korean with English abstract).
5 Chang, T.W. and Choo, C.O. (1999) Faulting processes and K-Ar ages of fault gouges in the Yangsan fault zone. Journal of Korean Earth Science Society, 20, 25-37 (in Korean with English abstract).
6 Chang, T.W., Kim, C.S., and Bae, D.S. (2003) Characteristics of fracture systems in southern Korea. The Journal of Engineering Geology, 13, 207-225 (in Korean with English abstract).
7 Chester, F.M. and Logan, J.M. (1986) Implications for mechanical properties of brittle faults from observations of the Punchbowl fault zone, California. Pure and Applied Geophysics, 124, 79-106.   DOI
8 Chester, F.H., Evans, J.P., and Biegel, R.L., (1993) Internal structure and weakening mechanisms of the San Andreas Fault. Journal of Geophysical Research, 98, 77, 1-786.
9 Choo, C.O. and Chang, T.W. (2000) Characteristics of clay minerals in gouges of the Dongrae Fault, Southeastern Korea, and implications for fault activity. Clays and Clay Minerals, 48, 204-212.   DOI
10 Faulkner, D.R. (2004) A model for the variation in permeability of clay-bearing fault gouge with depth in the brittle crust. Geophysical Research Letters, 31, L19611, doi:10.1029/2004GL020736.   DOI   ScienceOn
11 Faulkner, D.R. and Rutter, E. H. (2001) Can the maintenance of overpressured fluids in large strike-slip fault zones explain their apparent weakness? Geology, 29, 503-506.   DOI
12 Holdsworth, R.E., van Diggelen, E.W.E., Spiers, C.J., de Bresser, J.H.P., Walker, R.J., and Bowen, L. (2011) Fault rocks from the SAFOD core samples: Implications for weakening at shallow depths along the San Andreas Fault, California. Journal of Structural Geology, 33, 132-144.   DOI   ScienceOn
13 Kuo, L.-K., Song, S.-R., Yeh, E.-C., Chen, H.-F., and Si, J. (2012) Clay mineralogy and geochemistry investigations in the host rocks of the Chelungpu fault, Taiwan: Implication for faulting mechanism. Journal of Asian Earth Sciences, 59, 208-218.   DOI   ScienceOn
14 Lee, C.S. and Lee, H. (2009) Hydrothermal alteration and engineering characteristics in the Bokan tunnel area passing through the Yangsan Fault. Journal of Mineralogical Society of Korea, 22, 13-22 (in Korean with English abstract).
15 Lee, K.M., Lee, S.H., Seo, Y.S., Kim, C.Y., and Kim, K.Y. (2007) Petro-mineralogical and mechanical property of fault material in phyllitic rock tunnel. The Journal of Engineering Geology, 17, 339-350 (in Korean with English abstract).
16 Moon, S.W., Yun, H.S., Kim, W.S., Na, J.H., Kim, C.Y., and Seo, Y.S. (2014) Correlation Analysis between Weight Ratio and Shear Strength of Fault Materials using Multiple Regression Analysis. The Journal of Engineering Geology, 24, 397-409 (in Korean with English abstract).   DOI   ScienceOn
17 Offler, R., Och, D.J., Phelan, D., and Zwingmann, H. (2009) Mineralogy of gouge in north-northeaststriking faults, Sydney region, New South Wales. Australian Journal of Earth Sciences, 56, 889-905.   DOI   ScienceOn
18 Olson, R.E. (1974) Shearing strength of kaolinite, illite and montmorillonite. Journal of the Geotechnical Division, ASCE, 100, GT11, 1215-1299.
19 Rutter, E.H., Maddock, R.H., Hall, S.H., and White, S.H. (1986) Comparative microstructures of natural and experimentally produced clay-bearing fault gouges. Pure and Applied Geophysics, 124, 3-29.   DOI
20 Sibson, R.H. (1977) Fault rocks and fault mechanisms. Journal of Geological Society of London, 133, 191-213.   DOI
21 Sibson, R.H. (1986) Brecciation processes in fault zone: Inferences from earthquake rupturing. Pure and Applied Geophysics, 124, 159-175.   DOI
22 Solum, J.G., van der Pluijm, B.A., and Peacor, D.R., and Warr, L.N. (2003) Influence of phyllosilicate mineral assemblages, fabrics, and fluids on the behavior of the Punchbowl fault, southern California. Journal of Geophysical Research, 108, B5, 2233, doi:10.1029/2002JB001858.   DOI
23 Solum, J.G. and van der Pluijm, B.A. (2004) Phyllosilicate mineral assemblages of the SAFOD pilot hole and comparison with an exhumed segment of the San Andreas Fault system. Geophysical Research Letters, 31, L15S19.
24 Song, S.J., Choo, C.O., Chang, C.J., Chang, T.W., and Jang, Y.D. (2012) Mineral composition and grain size distribution of fault rock from Yangbuk-myeon, Gyeongju City, Korea. Economic and Environmental Geology, 45, 487-502 (in Korean with English abstract).   DOI   ScienceOn
25 Song, Y. Chung, D., Choi, S.-J. Kang, I.-M., Park, C., Itaya, T., and Yi, K. (2014) K-Ar illite dating to constrain multiple events in shallow crustal rocks: Implications for the Late Phanerozoic evolution of NE Asia. Journal of Asian Earth Sciences, 95, 313-322.   DOI   ScienceOn
26 Tembe, S., Lockner, D.A., and Teng-Fong Wong, T.-F. (2010) Effect of clay content and mineralogy on frictional sliding behavior of simulated gouges: Binary and ternary mixtures of quartz, illite, and montmorillonite. Journal of Geophysical Research, 115, B03416, doi:10.1029/2009JB006383.   DOI
27 Wu, F.T. (1978) Mineralogy and physical nature of clay gouge. Pure and Applied Geophysics, 116, 655-688.   DOI
28 Torgersen, E., Viola, G., Zwingmann, H., and Henderson, I.H.C. (2014) Inclined K-Ar illite age spectra in brittle fault gouges: effects of fault reactivation and wall-rock contamination. Terra Nova, doi: 10.1111/ter.12136.   DOI   ScienceOn
29 van der Pluijm, B.A. and Marshak, S. (2004) Earth Structure: An Introduction to structural geology and tectonics. W.W. Norton and Company. p656.
30 Woodcock, N.H. and Mort, K. (2008) Classification of fault breccias and related fault rocks, Geological Magazine, 145, 435-440.