• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.283-286
• /
• 2007

지반을 보강 또는 지하수를 차단하기 위해 실시되는 그라우팅과 같은 공법이 제대로 효과를 발휘하기 위해서는 bulging 또는 sheet 형태의 그라우트체 형상의 조절이 필수적이다. 본 논문에서는 이러한 그라우트체 형상에 영향을 끼치는 인자를 찾기 위해 포화된 사질토지반에서의 그라우트 실험을 다수 실시하였다. 그라우트의 주입속도와 점성의 크기, 사질토의 상대밀도와 입도크기의 인자를 사용하여 실험을 사용한 결과, 비교적 느린 주입속도와 작은 상대밀도, 그라우트의 점성과 입자가 클수록 bulging 형상의 그라우트체가 형성이 되었다. 이와는 반대로 빠른 주입속도와 높은 상대밀도, 그리고 그라우트의 점성과 흙 입자가 작을수록 sheet 형상의 그라우트체가 형성이 됨을 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.2
• /
• pp.194-200
• /
• 2002

A method for simulating flow of extremely low Reynolds number in a vortex-in-cell (VIC) was studied. The viscous diffusion was represented by the random walk method. The validity of this method was proven by applying it to the flows passing over a fence placed vertically at an extremely low Reynolds number. The effects of parameters of the VIC method on the random walk method, such as the number of point vortices, the mesh density and the time increment, were investigated by numerical analysis using a one-dimensional diffusion equation. Changes in the relative error of vorticity depending on those parameters were clarified.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.1044-1051
• /
• 1989

A numerical calculation is carried out for the analysis of 3-dimensional compressible flow field in axial-flow rotating blades by using finite element method. The calculation of flow in impellers plays a dominant role in the theoretical research and design of turbomachines. Three-dimensional flow fields can be obtained by the quasi-three-dimensional iterative calculation of the flows both on blade-to-blade stream surfaces and hub-to-shroud stream surfaces with the introduction of viscous loss model in order to consider a loss due to viscosity of fluid. In devising the loss model, four primary sources of losses were identified: (1) blade profile loss (2) end wall loss (3) secondary flow loss (4) tip-leakage loss. For the consideration of an axially parabolic distribution of loss, the results of present calcullation are well agreed with the results by experiment, thus the introduction of loss model is proved to be valid.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.151-157
• /
• 1999

In this study, tile characteristics of three dimensional flow fields in centrifugal flump impeller are investigated by numerically. Detailed analysis and understanding of flow field in centrifugal pump are very important to predict performance of components. The three dimensional viscous fluid flow in centrifugal pump is distingushed isentropic process region from irreversible process region by wall shear effect, secondary flow, centrifugal and Coriolis forces, variation of boudary layers. Development of low momentum region by viscous fluid flow in the centrifugal impeller causes stall and blockage which is irreversible process region, and resulting in decrease of the performance and efficiency of centrifugal pump. Especially, the result is that Coriolis and centrifugal forces are most powerful factors which are increasing the irreversible region.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.5
• /
• pp.517-524
• /
• 2010

In this paper the progressive collapse resisting capacity of steel moment frames with viscous dampers was evaluated by nonlinear dynamic analysis. The effects of dampers installed in steel beam-column sub-assemblages with varying natural period and yield strength were evaluated after sudden removal of a column. According to the parametric study the vertical displacement general decreased as the damping ratio of the system increased, and the dampers were effective both in elastic and elasto-plastic systems. The nonlinear dynamic analysis results of the 15-story analysis models showed that the decrease in vertical deflection of the structure with 9m span length, which showed larger deflection, was more predominant than that of the structure with 6m span length.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.3 s.55
• /
• pp.33-42
• /
• 2007

In this study, for research on an improvement of the seismic safety of an EDG system, a small scale EDG system was manufactured. For the isolation system, the Coil Spring-Viscous Damper systems were selected. For the shaking table test, 3 kinds of seismic motions were selected which had different frequency contents. In this study, the isolation effects were different and they depended on the input seismic motion. In the case of an NRC earthquake which had low fiequency contents, the isolation effects of the horizontal direction were 20%. But for the seismic motions which had high fiequency contents, the isolation effects were $50{\sim}70%$. In the case of the vertical direction, poor isolation effects were observed. It was because the design properties and the real properties of the isolation system were a little different.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.3
• /
• pp.19-26
• /
• 2011

Compaction tests have been performed to investigate the compaction characteristics of sands and clays with organic mixture. Weathered granite soil, kaolinite, and granulated carbon were used as the alternatives of sand, clay, and organics, respectively. The soapy water which is a kind of surfactant solutions was also used as water substitute to see the engineering properties changes of each soil. As seen when water was used, the optimum moisture contents increased and the maximum dry unit weight decreased for the soil with surfactants as the percentage of the organic contents increased. Surfactants slightly improved the compaction efficiency at low compactive energy level for the weathered granite soil with organics. As the organic contents increased for clays with surfactants, the optimum moisture contents decreased and the maximum dry unit weight increased. Surfactants slightly improved the compaction efficiency of clays with organics at all levels of compaction energy.

• Journal of the korean Society of Automotive Engineers
• /
• v.5 no.3
• /
• pp.56-63
• /
• 1983

강성체로된 견인물체가 탄성무한경면으로 지지된 점탄성층 위를 미끄러져 갈 때 접촉구간에서의 압력분포와 마찰 특성을 고찰하였다. 즉, 접촉구간에서의 강성체의 모양과 압력분포에 관한 적분 방정식을 구하고, 점탄성층의 두께가 접촉구간에 비하여 충분히 두꺼울 때 압력분포와 마찰계 수의 근사해를 구하였다. 압력분포의 모양은 점탄성층의 물성을 표시하는 지수값, 즉 .alpha.<1/2, .alpha.=1/2, .alpha.>1/2에 따라서 크게 다르다. 한편, 수치해석에 의하면 마찰 계수에 대한 근 사해는 강성체의 미끄럼 속도, 점탄성 층의 두께, 탄성체의 영율 (E$_{o}$ )과 점탄성층의 시효 성탄성계수 (E$_{v}$ )의 차, 즉 E$_{o}$ /E$_{v}$ 에 따라 변화함을 알 수 있다. 즉, 탄성체가 점탄성층에 비하여 딱딱하면 할수록, 또 강성체 속도가 느리면 느릴수록 마찰계수는 작아진다. 그리고 불성의 지수(.alpha.)가 커지면 커질수록 근사해의 수렵 속도는 느려지게 되고 지 수(.alpha.)가 1에 가까워지면 점탄성층의 탄성효과는 점성효과에 비하여 거의 무시할 수 있으며 근사해는 의미가 없어지게 된다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1992.06a
• /
• pp.66-70
• /
• 1992

고전적 동수압유체윤활이론은 유막 내의 점성을 일정하다고 가정한다. 유막의 전개방향이나 유막두께방향으로의 온도변화를 결정하는 데 이론적으로나 실험적으로 어려움이 있으므로 이 간소화는 베어링설계에 널리 사용되었다. 그러나 많은 실험적 관찰은 등점성 동수압유체윤활이론은 유막내의 온도상승이나 하중지지용량의 감소를 설명하지 못함을 입증하였다. Fogg는 평행한 추력베어링이 하중을 지지할 수 있음을 발견하였으며 이 fogg의 효과는 동수압 유체윤활이론의 예측과 반대되는 것이고 Thermal wedge라는 개념으로 설명되었다. Hunter와 Zienkiewicz는 유막내에서의 에너지 균형에 관한 이론적 연구를 소개하였고, 온도효과와 이로 인한 유막두께 방향의 점도 변화는 무시될 수 없다는 결론을 내렸다. 본 해석에서는 압력분포를 근사해법으로 구하여, 선지지되는 2차원 틸팅패드 트러스트베어링에서 패드의 탄성 변형을 고려한 열유체윤활해석과 고려하지 않은 얼유체윤활 해석의 결과를 서로 비교함으로서 패드의 변형이 유막의 압력장과 온도장에 미치는 영향과 패드두께의 변화가 유막의 온도장과 압력장에 미치는 영향을 고찰하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.503-509
• /
• 2020

In offshore floating structures, the viscous mean drift force due to drag is considered a design part that has not been considered until recently. In this paper, an analytical solution for the viscous mean drift forces on a floating vertical cylinder considering the waves and currents was obtained. The area was considered by dividing it into a splash zone above the free surface and a submerged zone below the free surface. In the case of waves, only the splash zone was considered; in the case of waves and currents, equations were obtained in both the splash zone and the submerged zone. The RAO results of previous studies were used to compare the calculated results with the drift forces acting on the fixed cylinder. Except for the case in only waves in the splash zone, the viscous mean drift force acting on the floating cylinder was larger than the drift force acting on the relatively fixed cylinder in most frequencies. In particular, the increase was greater when the currents were considered to be more important. Therefore, these results provide the inference for the viscous drift force due to drag in the design of floating offshore structures.