• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.116-124
• /
• 2012

In this paper, we propose an efficient lighting control system design for AVR based LSDM control. This paper, an efficient lighting control system design for LSDM control be design divided as the signal control part for I/O data bus and the timer/counter part for clock signal control according to operating conditions. LSDM control logic be optimization to PORTx and DDRx register by specifying the logical value of each bit for effective control signal processing. And, the LSDM control signal by lighting control program execution of ATmega128 be designed to be LSDM lighting control by control logic operating. In this paper, a proposed lighting control system were measured to power loss rate to proved the power loss reduction about lighting status of LSDM control logic by download the lighting control program to system through serial from host PC. As a measurement result, a proposed lighting control system than the existing lighting control system were proved to be effective to the overall power consumption reduction.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.17-23
• /
• 2012

In this paper, we were proposed a new LED light device lighting control algorithm for optimal energy saving. The propose lighting control algorithm be to the LED lights devices lighting control by measuring illuminance into multi sensors. And it be to lighting control by inverting of octagon pattern during set-up time. All the LED is lighting when detecting motion by the motion sensor. And, it was designed enable remote management control by communicate with central monitoring center using Zigbee wireless network to measured data from sensors at real time. In this paper, a proposed lighting control algorithm was measured power consumption about the lighting status of LED lighting device using the lighting control program for demonstrate of energy savings effect. The measured result, the lighting method applying proposed algorithm were proved energy savings effect of more 40% more compared to the existing lighting method.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.1
• /
• pp.109-120
• /
• 2013

In this paper we proposed the design of the hybrid road lighting control system using solar-light generation. The proposed hybrid road lighting control system be power offer through hybrid controller using Solar-Light Generation, and it is designed so that it can control lighting up. To control supply of continuous power when during power shortages. And the gateway be transmit control command using zigbee to road lighting to ensure that automatic lighting control on human sensing. In this case, the gateway is apply the lighting control algorithm that decisions to the status of the system by a pre-set time schedule and be able to operate. In this paper, the proposed efficiency analysis results of a hybrid road lighting control system was consumed power of 129.6W per day, 3.8KW per month, 47.3KW per annual. As a result, it were able to increase the energy efficiency than existing lighting control system by reduce power consumption of 76.2% and the electricity prices of 76.8%.

• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.274-282
• /
• 2012

In this paper, we propose the design of lighting control algorithm for intelligent LED lighting system. The proposed lighting control algorithm transmitted to MCU through a data bus the environmental information detected from respectively sensor node. The MCU control software was designed to determine the level maintained to depending on the set control method by comparing the results that calculated the dimming level using a signal value. Also, it was designed to be lighting by cross-performed periodically the rotation and reverse method by created fully symmetrical pattern using the control algorithm to LED lighting device. In this paper, the proposed lighting control algorithm improved the reliability of the data sent by designed the system that can be controlled lighting to stable, and it was maintained the event delivery ratio of 91%. Also, the lighting device was decreased the luminous intensity of 32%, the power consumption of 49%, and heat generation of 32%. As a result, it were could be improved the energy efficiency that the life-cycle of LED has been increased 50%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1020-1026
• /
• 2012

In this paper, we proposed a RTOS-based lighting control system to improve energy efficiency. This proposed system, real time process was designed to the specified division of the LED streetlight control module for the RTOS-based lighting control into three different tasks. The first task transmits LED lighting signal by measuring illuminance, and the second task transmits motion detecting signal using motion detector. In the third task, lighting control to LED was designed through passed control signal from other tasks The execution status was examined ports that are directly to the ATmega128 MCU for the verification of the system, and illuminance distribution and operating conditions were verified through LED street field test. The proposed RTOS-based lighting control system has brought improving system performance and also facilitate an addition of other functions, and it was possible to optimize energy saving by intelligent lighting pattern control.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.109-113
• /
• 2016

In this paper, we propose efficient LED lighting control algorithm using a David star magic square. Such algorithms increases the power reduction, the heat efficiency and LED life cycle and the efficiency of the LED lighting control consumption. Lighting system using existing Magic square algorithm could be reduced to increase the heat efficiency of the LED because the LED lighting time of the reduced cross-lighting. but it has a limit to the lighting control. If should apply the this proposed algorithm, can reduces power consumption and increases LED life-cycle, heat efficiency of LED lighting module and efficiency of the lighting control of the LED. This paper proposed that algorithm is by using a David star magic square on the LED Matrix. Divided into twelve areas to move the pattern in constant time interval, to perform the cross rotation and inversion techniques to thereby light up. In this paper proposed algorithm of this paper was compared with existing Magic square approach. As a result, power consumption and heat-value and luminous flux was reduced as the conventional lighting system. And, the LED lighting control increase the efficiency.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.182-184
• /
• 2009

본 논문은 램프 점등을 위한 공진회로와 정상상태에서의 저주파수 구형파(low frequency square-wave) 인버터 전류 제어를 실현하는 HID 전자식 안정기에 풀브리지 인버터(FB)와 LC 필터를 제안한다. 점등은 LC필터의 공진주파수에서 풀브리지 인버터 제어에 의한 공진에 의해서 이루어지고, 점등 후에 회로는 풀브리지 제어에 의해 벅컨버터 저주파수 구형파 인버터로 동작한다. 점등이 일어나는 동안의 LC필터의 공진주파수는 ($f_o$=120kHz)이고, 고조파를 감소시키고 음향공명현상을 피하기 위한 벅컨버터스위칭 주파수($f_{sw}$=50kHz)를 선택하였다.

• Journal of IKEEE
• /
• v.15 no.4
• /
• pp.261-266
• /
• 2011

In this paper, new efficient lighting control system for light devices is proposed to reduce power consumption and increases LED life-cycle and heat efficiency of LED lighting module. The new proposed lighting control system for light devices divides into 4 stages according to the illuminance surrounding by measuring illuminance and apply to automatic pattern lighting algorithm. And via level check will be light up for set time by applying intersection lighting algorithm of magic square pattern forming a fully symmetrical. Experimental analysis results, shows heating value and power consumption reduced to maximum 30 percent and lifetime of LED improved to maximum 60 percent in comparison with previous lighting system so applying system to LED streetlight, stable and high energy efficiency can be acquired.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.207-213
• /
• 2014

In this paper, we propose Bluetooth based on efficient indoor-emotion-lighting control system. The proposed Bluetooth based on indoor-emotion-lighting control system was designed to be automatically controlled by the motion sensor light and using a Bluetooth module may be controlled to light up or mobile PC, wall pad. In addition, It was designed the LED lighting On/Off control the environment according to Humidity, the temperature, illumination, motion sensors. System based on the bluetooth is automatic control possible using the illumination sensor, and by selecting the desired lighting partial control can be designed. The experimental efficiency results of the proposed indoor-emotion-lighting control system were designed to provide an internal environment adapted to a resident, were able to maximize the energy savings, have reduced power consumption than the traditional simple On/Off control system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.8
• /
• pp.45-51
• /
• 2008

HID(High Intensity Discharge) search lamp for shipment requires a high open circuit and output current compare than vehicle. This paper presents a soft-start open circuit voltage and constant current sequence control method for 2.5[kW] HID search lamp. The proposed method controls the opal circuit voltage and discharge current of HID lamp according to ignition signal with a simple 8-bit micro-processor and PWM device. For the stable control of lamp, micro-processor checks the output voltage and current. And the checked signals are compared with ignition signal and changes the control mode for stable operation. An ignition signal and micro-processor change the control mode from open circuit voltage contort to constant current control. The proposed control scheme is verified from experimental tests of 2.5[kW] HID search lamp for shipment.