• Journal of Welding and Joining
• /
• v.15 no.3
• /
• pp.29-35
• /
• 1997

실제로 용접구조물의 재료에는 항상 내부 잔류응력이 존재하며 그 크기는 재료내의 내부 잔류응력간의 평형의 원리(Self-equilibrating system)에 의해 결정 된다. 일반적인 구조 강도설계에서 행해지는 탄성해석에서는 재료 내부에 존재하는 잔류응력을 고려하지 않기 때문에 설계시에 계산된 응력이 심하중하의 구조물에서 발생하는 응력과 같다고 볼 수는 없다. 철강재료를 사용한 구조물의 경우 구조물 제작 공정 전반에 걸친 성형가공 및 조립과정에 수반되어 재료 내에는 잔류응력이 발생되며 특히 용접조립에 의해 용접부 근방에서는 재료의 항복강도 수준의 상당히 큰 용접응력 이 발생하게 된다. 일반적으로 용접잔류응력의 완화법으로 가장 확실한 방법은 후열 처리법(Post weld heat treatment, PWHT)이지만 이 방법의 적용은 구조물의 크기에 제한을 받게 된다. 따라서 PWHT를 적용하기 어려운 구조물에 대해서는 다른 방법에 의해 용접잔류 응력을 완화시켜야 하며 이 경우에 일반적인 방법으로 기계적 응력완화 법(Mechanical stress relief method, MSR)이 있다. 본고에서는 MSR의 기본원리에 대하여 간단하게 정리하고 실 구조물에 대한 MSR 적용시 고려해야 할 제반사항을 위하여 단순 용접부에 대한 MSR 적용 실험결과와 실제 압력용기를 대상으로 MSR을 자체 제작된 기술절차서에 따라서 시행하고 MSR의 적용성에 대해서 검토하였다.

• 한국항공운항학회:학술대회논문집
• /
• 2015.11a
• /
• pp.272-276
• /
• 2015

원재료 성분, 프리프레그 제작공정, 재료 취급, 부품 제작 기술, 적층순서, 환경조건, 그리고 시험방법 등 여러 요인으로 인해 복합재 물성치는 일반적으로 금속재에 비해 변동성이 높다. 따라서, 이러한 높은 변동성을 고려하기 위해서는 엄격한 통계분석기법을 적용하여 복합재의 기계적 물성에 대한 설계 허용치를 계산해야 한다. 1990년대 후반 미국에서는 FAA와 NASA를 중심으로 표준화된 절차에 따라 항공기 설계에 적용가능한 복합재 물성 데이터베이스를 구축하고 공유하기 위한 프로세스를 개발하기 시작하였고, 현재 NCAMP를 중심으로 복합재 데이터베이스 구축 작업이 진행되고 있다. NCAMP는 기본적으로 CMH-17에서 채택한 통계분석기법을 이용하여 허용치를 계산하고 있으며, 본 논문에서는 복합재 허용치 계산 기법 중 점추정 방법을 이용한 통계분석 기법과 그 적용에 대해 논하고자 한다.

• Proceedings of the Korea Database Society Conference
• /
• 1999.10a
• /
• pp.165-171
• /
• 1999

형상관리는 프로젝트를 추진함에 있어 현실적으로 필수적인 관리 항목으로 인식할 필요성이 대두되고 있다. 그 이유는 프로젝트를 성공적으로 완료하기 위해서는 전체 프로젝트 공정을 통해 사전에 계획된 절차에 준하여 단계별로 어떻게 추진되고 있는지 추진과정을 추적, 확인되어야 하며, 또한 추진 결과에 있어 단계별로 어떤 결과물이 양산되고 있는지를 검증 및 확인하여야 하기 때문이다. 본 논문에서는 이러한 형상관리를 위해서는 프로젝트 수행 초기에 형상관리 계획을 입안하기 위한 형상관리 조직형태를 제안하며 작성된 계획서에 수록된 형상관리 조직을 운영함에 있어 필요한 형상관리활동의 주요 내용들에 대해 국내외 표준 및 지침에 대해 조사하였으며, 현실적으로 공공 프로젝트를 추진함에 있어 형상관리를 위한 필수관리 항목과 문서화 기준 및 이들 문서들간의 연관성에 대해 연구, 제안한다.

• Education of Primary School Mathematics
• /
• v.21 no.2
• /
• pp.163-192
• /
• 2018

The purpose of this study was to examine the relations among mathematics teachers' beliefs, classroom norms and discourse, and equity issues in mathematics classrooms. In order to achieve this purpose, three teachers who work in the same school were analyzed. The analysis revealed that the participating teachers' beliefs about mathematics teaching and learning and about their students' abilities and motivation influenced the establishment of classroom norms and discourses that defined what students needed to do to be successful mathematics learners. Also, classroom norms and discourse affected the development of students' identity and power and the level of equity in the classroom.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.14-20
• /
• 2018

Electric vehicles are environmentally friendly because they emit no exhaust gas, unlike gasoline automobiles. However, since they are driven by the electric power from batteries, the distance they can travel based on a single charge depends on their energy density. Therefore, the lithium-ion battery having a high energy density is a good candidate for the batteries of electric vehicles. Since the electrode is an essential component that governs their efficiency, the electrode manufacturing process plays a vital role in the entire production process of lithium-ion batteries. In particular, the coating process is a critical step in the manufacturing of the electrode, which has a significant influence on its performance. In this paper, we propose an innovative process for improving the efficiency and productivity of the coating process in electrode manufacturing and describe the equipment design method and development results. Specifically, we propose a design procedure and development method in order to improve the core plate coating quality by 25%, using a technology capable of reducing the assembly margin due to its high output/high capacity and improving the product capacity quality and assembly process yield. Using this method, the battery life of the lithium-ion battery cell was improved. Compared with the existing coating process, the target loading level is maintained and dispersed to maintain the anode capacity (${\pm}0.4{\rightarrow}{\pm}0.3mg/cm^2r$ reduction).

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.12
• /
• pp.689-695
• /
• 2015

A biofilm filtration for the removal of gaseous pollutants has been recognized as a process with a complex interaction between the gas flow characteristics and the process operating variables. This study aims to develop an one dimensional dynamic numerical model which can be utilized as a tool for the analysis of biofilm filtration process operated in plug flow mode. Since, in a plug flow system, minor environmental changes in a gaseous unit process cause a drastic change in reaction and the interaction between the pollutants is an influencing factor, plug flow system was generalized in developing the model. For facilitation of the model development, dispersion was simplified based on the principles of material balance. Several reactions such as competition, escalation, and control between the pollutants were included in the model. The applicability of the developed model was evaluated by taking the calibration and verification steps on the experimental data performed for the removal of BTX at both low and high flow concentration. The model demonstrated a correlation coefficient ($R^2$) greater than 0.79 under all the experimental conditions except for the case of toluene at high flow condition, which suggested that this model could be used for the generalized gaseous biofilm plug flow filtration system. In addition, this model could be a useful tool in analyzing the design parameters and evaluating process efficiency of the experiments with substantial amount of complexity and diversity.

• Korean Chemical Engineering Research
• /
• v.52 no.5
• /
• pp.613-619
• /
• 2014

A flare system is a very important system that crucially affects on the process safety in chemical plants. If a flare system is designed too small, it cannot prevent catastrophic accidents of a chemical plant. On the other hand, if a flare system is designed too large, it will waste resources. Therefore, reasonable relief load estimation has been a crucial issue in the industry. American Petroleum Institute (API) suggests basic guidelines for relief load estimation, and a lot of engineering companies have developed their own relief load estimation methods that use an unbalanced heat and material method. However, these methods have to involve lots of conservative assumptions that lead to an overestimation of relief loads. In this study, the new design procedure for a flare system based on dynamic simulation was proposed in order to avoid the overestimation of relief loads. The relief load of a deethanizer process was tested to verify the performance of the proposed design procedure.

• Analytical Science and Technology
• /
• v.8 no.3
• /
• pp.281-284
• /
• 1995

The effect of permanganate concentration and refluxing time on the test COD results were investigated, as a validation test of the revised procedure. The amended protocol involves the use of a more dilute(1/2.5) permanganate solution(0.010N) and a shorter(1/3) refluxing period(20 min). This revision resulted only 70% of the COD value determined by the old procedure with 8 somewhat improved precision(CV 4.6%${\rightarrow}$3.3%). The dominant factor that influences the decrease in the COD result is the oxidant concentration, being two thirds of the overall effect. The same results were obtained in the comparison test using seawater samples.

• The Journal of the Korea Contents Association
• /
• v.12 no.7
• /
• pp.156-168
• /
• 2012

As the increase of violent crimes such as robbery, murder, and rape has become a social problem, the government is considering institutionalizing the identification of criminals to prevent crime and to guarantee people's right to know. Such an atmosphere led to the approval of the revision of 'Special Law On the Punishment of Specific violent Crimes' in the National Assembly in April 2010. The revision allows the revelation of the profiles of crime suspects including the pictures of their faces at the investigation stage. However, whether the revision had been effective in preventing crime has not been demonstrated empirically. Moreover, identity revelation is a grave intrusion into privacy and an abuse of human rights such as personal rights and the right to a fair trial, since personal information of criminal suspects would be released to the media prior to the court's final judgements. Also it violates the principle of presumption of innocence, the principles of due process, the principle of double jeopardy, the principle of prohibition against excessive, the principles of clarity, and the principle of liability.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.5
• /
• pp.3-10
• /
• 2020

Subcontracting of construction is essential to carry out public construction projects. Subcontractor of the construction work shall enter into a contract with the original contractor without directly entering into a contract with the owner. Subcontracts are therefore greatly affected by the original contract with the owner. To protect subcontractors, the Fair Trade Act is enacted and the construction company's standard subcontracting contract is in operation. However, subcontracts are not properly reflected in the Government contract system, which deals with the relationships between the owner and the original contractor. In particular, the subcontractor may complain of difficulties at the public construction site as such procedures are not properly reflected in the construction work standard subcontract, although various procedures shall be carried out depending on the amount when change order occurs in subcontracts. Thus, the direction of improvement of subcontracting systems was proposed in the case of change order at public construction project sites as follows: First, the rights of subcontractors should be strengthened. Second, in order to resolve the information non-identity, subcontractors should have access to information related to subcontracts. Third, the status of subcontractor shall be guaranteed by reflecting the characteristics of the subcontract when the original contract for public works is concluded. Fourth, the dispute settlement method should be prioritized over litigation in order to fair subcontracting.