Transactions of the Korean Society for Noise and Vibration Engineering
/
v.15
no.3
s.96
/
pp.272-279
/
2005
In this study the optimal isolation system for the prototype HIFD(high impulsive force device) is investigated. For this purpose, firstly, the dynamic behavior of a human body and a transmitted force under specific operation conditions are analyzed through a series of experimental works using the devised test setup. In order to design the optimal dynamic absorbing system, the parameter optimization process is performed using the simplified isolation system model based on the experimental results of linear impulse and transmitted force. Finally, under the parameters satisfying the constraints of the buffering displacement and the transmitted force, the performance of the designed isolation system for the prototype HIFD is evaluated by experiment.
고전압 기기의 절연물 내부에서 부분방전 현상이 발생되면 절연파괴로 진전된다. 회전기기가 운전중인 상태에서 on-line 부분방전시험은 고정자 권선의 절연상태를 검사, 평가 할 수 있는 중요한 수단으로서 이러한 부분방전시험을 통하여 회전기기 시스템의 사고예방을 위한 진단을 할 수 있다. 부분방전 펄스는 10MHz $\sim$ 1GHz의 대역폭을 갖는 것으로 알려져 있으며, 이러한 고주파 대역의 전자파 에너지의 효과적인 검출을 위한 센서 중 하나로 웨이브가이드 구조의 고주파 검출센서가 존재한다. 기존의 전자기적 에너지를 검출하는 SSC (Stator Slot Coupler)센서를 한쪽 포트를 가지는 마이크로스트립센서 형태로 사용할 경우 접지면이 도체전체로 씌워져 있고 임피던스 정합을 위한 50옴의 칩저항이 신호라인과 접지사이 루프를 형성하여 기기 운전시 기기의 성능에 영향을 미칠 수 있는 단점을 가지고 있다. 이 단점을 보완하기 위해서 본 논문에서는 회전기내 부분방전 펄스의 전자기적 에너지를 검출할 수 있는 2선 평행 전송선로 라인을 응용한 부분방전 검출 센서를 제안하였고 시뮬레이션을 통해 성능을 입증하였다. 제안된 센서의 성능을 입증하기 위하여 2선 평행 전송선로 타입의 센서와 기존의 SSC (Stator Slot Coupler) 센서를 약간 변형시킨 마이크로 스트립 센서를 고정자 슬롯의 Wedge 부착한 후 두 센서 비교 분석하였다. 결과적으로 제안된 센서는 기존 SSC 타입의 마이크로스트립 센서에 비하여 더 간단한 형상을 가지며 운전 중 기기의 성능에 영향을 덜 미치는 효과를 얻을 수 있었다.
Proceedings of the Korean Vacuum Society Conference
/
2010.08a
/
pp.204-204
/
2010
본 연구에서는 Glass 기판 위에 우수한 광 투과도를 갖는 ZnO 기반의 Thin Film Transistor (TFT)를 제작하였으며, 이에 대한 전기적 및 광학적 특성을 분석하였다. 소자 구조의 제작은 Maskless Aligner를 이용한 Optical lithograph법을 이용하였다. 채널층은 ZnO로 하였고 Source/Drain 영역은 GaZnO로 하여 전체구조가 ZnO 기반의 homogeneity를 유지하게 하였다. 이때 Gate 절연막은 Bi1.5Zn1Nb1.5O7와 SiO2 두가지 종류로 하여 각각의 특성을 비교하였다. 본연구에서 TFT구조의 각 층은 모두 r. f. 마그네트론 스퍼터법으로 증착하였다. 제작된 TFT들은 채널층 및 절연막 형성 등에 관여된 세부적 실험변수의 변화에 관계없이 약 75% 이상의 우수한 광투과도 특성을 보였다. 전기적 특성 평가에서, 제작된 TFT들은 전반적으로 비교적 낮은 문턱전압과 높은 이동도를 보였다. 하지만, 트랜지스터의 전기적 전송 특성의 주요 인자들인 채널-이동도, 스위칭, 누설 및 이력 등은 ZnO 채널층 혹은 Bi1.5Zn1Nb1.5O7 절연막 형성 시 주입되는 O2 가스의 분압에 의존하는 것이 관측되었다. 이를 통하여 트랜지스터의 각 세부 영역의 구조 및 형성 조건이 트랜지스터의 전기적 특성에 미치는 영향과 상관관계에 대하여 논의한다.
Park, Geeyong;Suh, Jong-Eun;Lee, Dae-Oen;Han, Jae-Hung
Transactions of the Korean Society for Noise and Vibration Engineering
/
v.26
no.4
/
pp.391-397
/
2016
Vibration disturbances induced by the reaction wheels can severely degrade the performance of high precision payloads on board satellites with high pointing stability requirements. The unwanted disturbances produced by the reaction wheels are composed of fundamental harmonic disturbances due to the flywheel imbalance and sub/higher harmonic disturbances due to bearing irregularities, motor imperfections and so on. Because the wheel speed is constantly changed during the operation of a reaction wheel, the vibration disturbance induced by the reaction wheels can magnify the satellite vibration when the rotating frequency of wheel meets the natural frequency of satellite structure. In order to provide an effective isolation of the reaction wheel disturbances, isolation performance of a hybrid vibration isolator is investigated. In this paper, hybrid vibration isolator that combines passive and active components is developed and its hybrid isolation performance using notch filter control is evaluated in single-axis. The hybrid isolation performance using notch filter control show additional performance improvement compared to the results using only passive components.
Proceedings of the Korean Vacuum Society Conference
/
2011.08a
/
pp.264-264
/
2011
1T-1C로 구성되는 기존의 dynamic random access memory (DRAM)는 데이터를 저장하기 위해 적절한 커패시턴스를 확보해야 한다. 따라서 커패시터 면적으로 인한 집적도의 한계에 직면해있으며, 이를 대체하기 위한 새로운 DRAM인 1T- DRAM이 연구되고 있다. 기존의 DRAM과 달리 silicon-on-insulator (SOI) 기술을 이용한 1T-DRAM은 데이터 저장을 위한 커패시터가 요구되지 않는다. 정공을 채널의 중성영역에 축적함으로서 발생하는 포텐셜 변화를 이용하며, 이때 발생하는 드레인 전류차를 이용하여 '0'과 '1'을 구분한다. 기존의 완전공핍형 평면구조의 1T-DRAM은 소스 및 드레인 접합부분에서 발생하는 누설전류로 인해 '0' 상태의 메모리 유지특성이 열화되는 단점을 가지고 있다. 따라서 메모리의 보존특성을 향상시키기 위해 소스/드레인 접합영역을 줄여 누설전류를 감소시키는 구조를 갖는 1T-DRAM의 연구가 필요하다. 또한 고유전율을 가지는 Si3N4를 이용한 oxide-nitride-oxide (ONO)구조의 게이트 절연막을 이용하면 동일한 두께에서 더 낮은 equivalent oxide thickness (EOT)를 얻을 수 있기 때문에 보다 저 전압에서 1T-DRAM 동작이 가능하여 기존의 SiO2 단일층을 이용한 1T-DRAM보다 동일 전압에서 더 큰 sensing margin을 확보할 수 있다. 본 연구에서는 누설전류를 감소시키기 위하여 소스 및 드레인이 채널위로 올려진 recessed channel 구조에 ONO 게이트 절연막을 적용한 1T-DRAM을 제작 및 평가하고, 본 구조의 1T-DRAM적용 가능성 및 ONO구조의 게이트 절연막을 이용한 sensing margin 개선을 확인하였다.
Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
/
v.12
no.4
/
pp.146-154
/
1998
Broadband noise with frequency components in the range from several kHz up the tens of MHz is a major obstacle factor in normal operation of the AC line to supply the power to electrical and electronic control equipments. Because this kind of noise could damage the device or could be a source of malfunction, many devices such as filter and surge suppressor are used to cut off the noise. But those devices could not disconnected from the power line, so they result in poor common-mode of NCT as well as insulation characteristics as a isolation transformer in addition faraday shielding and proposed analysis model of NCT having tow functions of surge and noise reduction. The simulated and experimental results for the surge suppression characteristics are compared and evaluated for designed protype 1[kVA] NCT.
직류내전압시험기는 접속재 등의 절연 성능을 평가하는 시험 설비로, 설비의 측정시스템은 성능평가를 주기적으로 실시하여 시험 신뢰성의 유지하여야 한다. 본 논문에서는 직류내전압시험기의 측정시스템을 교정용 표준기를 사용하여 비교 측정을 실시하고, 그 결과를 시험시 반영하고자 한다.
In this study, we fabricated and characterized a calorimetric-type flow sensing element using a micromachined silicon substrate. The cooling and heating effects resulted from the gas flow were measured by two temperature sensors located at both sides of the heating resistor, and the insulator diaphragm was employed as a substrate in order to improve thermal isolation. The sensor generated $0{\sim}378.4mV$ output signal under 10V bridge-applied voltage when the nitrogen gas was passed on the sensor surface having a mass flow rate of $0{\sim}0.25grs/min$, and reached to the stable operating condition within 10 seconds.
Proceedings of the Korean Reliability Society Conference
/
2011.06a
/
pp.61-70
/
2011
본 논문에서는 전원회로에 사용되는 주요 부품인 트랜스포머에 대한 주요한 고장모드, 고장메커니즘, 스트레스 인자들을 규정하고 그에 따른 가속열화시험을 실시하여 가장 유효한 스트레스 인자를 도출하고 트랜스포머의 열화가 전원회로에 미치는 영향을 분석에 대한 연구를 진행하였다. 전원회로의 고장분석에서, 트랜스포머의 일시적인 특성변화 또는 고장현상(Bunt, Short, Open 등) 발생으로 인한 전류의 급증, 공진주파수 부조화, Spike 발생 등으로 인한 주변부품 또는 구성회로에 미치는 영향을 정확하게 분석하는 것이 어렵다는 점과 비교적 단순한 구조와 강한 내성으로 뚜렷한 고장모드를 보이지 않는 특징으로 인해 전원회로의 고장원인이 트랜스포머 외의 반도체 소자, 저항, 커패시터 등에 의한 것으로 분석되는 것이 일반적이다. 유효한 스트레스 인자별 가속열화시험을 통한 성능평가에서는 절연저항을 제외한 특성에서는 뚜렷한 변화(열화)를 보이지 않았고, 고온고습에 의한 스트레스에서 가장 절연저항의 급격한 열화를 확인할 수 있었다. 또한 열화 각각의 스트레스 인자에 따라 열화시킨 트랜스포머를 실장하여 평가하는 실증적인 방법을 통해 분석한 결과 트랜스포머의 열화는 스위칭소자를 비롯한 주변부품에 스트레스를 가중시켜 발열로 대변되는 현상을 유발하고 트랜스포머 입출력 양단간의 위상편차는 심화시키는 것으로 나타났으며, 스트레스 인자 중 온습도에 의한 영향이 가장 유효하다는 것으로 확인할 수 있었다.
Proceedings of the Korean Society for Noise and Vibration Engineering Conference
/
2012.04a
/
pp.324-329
/
2012
Isolation tables are widely used for precision equipments and their isolation performances have been usually expressed and evaluated by transsmissibility. However, transmissibility is a concept for 1-degree of freedom(DOF) system. In practice, isolation tables are supproted by more than 4 springs. Each spring is subjected to vertical and horizontal ground vibrations, and also the table has more than 1-DOF. Therefore, isolation tables should be treated as multi-input/multi-output(MIMO) system of which isolation performance is expressed by transmissibility matrix. However, the matrix is too complicated to be an index for a system. In this paper, maximum singular value of transmissibility matrx is suggested as a simple performance index of a MIMO isolation system. Physical meaning of singular value is explained using a simple a 2-DOF isolation table. Furthermore, maximum singular values of passive, 3-DOF active and 6-DOF active isolation tables are obtained through experiments, and their meaning are explained and compared with each other.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.