• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.5
• /
• pp.391-399
• /
• 2017

This paper presents the effects of the cutting speed and feed rate on the axial shape of flat end-milled down cut side walls. Experiments were performed using the cutting speed, tool diameter, and feed per tooth as variables, and the thrust force and axial shape were measured as the experimental results. The results of this study confirmed that a smaller feed per tooth, which is proportional to the value obtained by dividing the feed rate by the cutting speed, results in a higher axial shape accuracy. In addition, the axial shape can be simplified to a form in which two straight lines having different slopes meet at a singular point. Therefore, it was concluded that the shape accuracy could easily be estimated during the operation and improved by adjusting the feed per tooth.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.609-615
• /
• 1995

Chip machining에 의한 U$_3$Si 분말제조시 절삭가공조건이 분말 입도 분포에 미치는 영향을 조사하기 위하여 U$_3$Si ingot를 선반에서 초경공구를 사용하여 절삭속도 및 이송속도를 변화시키면서 chip을 가공하였고, 가공된 chip의 형상을 광학현미경으로 관찰하고 칩의 크기를 측정하였다. 모든 절삭조건에서 톱니모양의 칩(saw toothed chip)이 형성되었으며, 일정한 절삭속도에서 공구의 이송속도를 변화시켰을 때 이송속도가 증가함에 따라 칩 두께의 증가와 함께 chip segment의 폭도 증가하여 chip segment 의 크기가 뚜렷이 증가함을 보였다. 또한 chip segment의 크기는 절삭속도 보다는 공구의 이송속도에 크게 영향을 받는 것을 알 수 있었고 분말의 입도 분포에도 크게 영향을 미치는 것으로 나타났다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.9
• /
• pp.839-849
• /
• 2015

This paper deals with an experimental technique for monitoring machining conditions by analyzing cutting-force vibration measured at a milling machine. This technique is based on the relationship of the cutting-force vibrations with the feed rate and cutting depth as reported earlier. The measurement system consists of dynamic force transducers and a signal amplifier. The analysis system includes an oscilloscope and a computer with a LabVIEW program. Experiments were carried out at various feed rates and cutting depths, while the rotating speed was kept constant. The magnitude of the cutting force vibration component corresponding to the number of cutting edges multiplied by the frequency of rotation was linearly correlated with the machining conditions. When one condition of machining is known, another condition can be identified by analyzing the cutting-force vibration.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.58-63
• /
• 1995

절삭가공 중에서도 높은 비중을 차지하는 구멍가공은 전자제품, 공작기계 뿐만 아니라 산업 전반에 걸쳐 소형 화, 다양화, 대량생산화 함에 따라 미세화, 고속화하게 되었다. 본 연구에서는 미세드릴 가공시에 발생하는 스러스트를 측정하여 이송, 절삭속도, 피삭재 두께 변화 등 각 절삭조건이 공구수면과 가공확대오차에 미치는 문제점을 해결하기 위한 방안으로 스텝이송 방식을 채택하여 그 효과에 대한 평가를 목적으로 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.150-156
• /
• 1996

Static variations of cutting forces are estimated using spindle motor current. Static sensitivity of spindle motor current is higher than feed motor current. The linear relationship between the cutting force and RMS value of the spindle motor current is obtained. Using cutting force estimation, tool overload in milling process can be well detected, and cutting force is regulated at a constant level by feedrate adaptive control.

• Journal of Advanced Marine Engineering and Technology
• /
• v.19 no.3
• /
• pp.70-76
• /
• 1995

생산스케쥴링의 기준이 되는 정보는 각 부품의 생산시간이나 생산비용인데, 이들은 고정된 값으로 취급되는 경우가 많다. 그러나, 실제적으로는 가공조건에 의하여 그 값들이 변화한다. 가공조거는 절삭깊이(depth of cut), 이송속도(feed rate), 및 절삭속도(cutting speed)로 구성되어 있다. 본 연구에서는 주어진 조건에 있어서 가공의 최적절삭조건을 최적이론의 하나인 페널티 함수이론(SUMT)을 이용하여 결정하는 할고리즘을 개발하였다. 알고리즘에서 목표함수(objective functions)로는 표면거칠기, 파워 소비, 등을 고려했다. 개발된 알고리즘 프로그램의 유용성을 증명하기 위해 선반가공의 예를 실행하여 그 결과를 예시하였다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.370-375
• /
• 2004

This paper presents an accurate cutting simulation and feedrate scheduling system for CNC machining. This system is composed of a cutting simulation part and a feedrate scheduling part. The cutting simulation part computes the geometric informations and calculates the cutting forces in CNC machining. The cutting force model using cutting-condition-independent coefficients was introduced for flat end milling and ball end milling. The feedrate scheduling part divides original blocks of NC code into smaller ones with optimized feedrates to adjust the peak value of cutting forces to reference forces. Some machining examples show that the developed system can control the cutting force at desired levels.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.3
• /
• pp.468-484
• /
• 1992

본 연구에서는 기존의 유연 볼 엔드밀의 절삭력 모델을 바탕으로 자유 곡면의 정삭 가공에서 발생할 수 있는 과대 또는 과소 절삭을 방지하면서 그 가공의 효율성을 높이기 위한 볼 엔드밀의 이송 속도 결정법을 제시하고자 한다. 먼저, 자유 곡면의 가공에서 발생될 수 있는 공구의 처짐에 따른 가공오차에 대하여 볼 엔드밀 공구의 처 짐벡터와 공작물의 공구 접촉점에서의 법선벡터로 표현되는 가공오차(machining error ) 예측 모델식을 유도하였다. 본 가공오차 예측 모델식은 다시 절삭날당 가지는 이 송량의 함수로 전개되어 그 곡면의 주어진 가공 공차(machining tolerance)를 만족시 키는 이송속도를 결정하게 된다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.14-18
• /
• 2001

Rise in cutting force causes tool damage and worsens product quality resulting in machining accuracy deterioration. Especially, fragile material cutting brings about breakage of material and worsens product surface quality. In this study, we trace the locus of cutting force and examine the machined surface corresponding to the cutting force loci. and build up a monitoring system for deciding normal operation or not of cutting process.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.2048-2061
• /
• 1991

As compared with other cutting types, the ball end milling process causes a complexity in cutting system and a falling-off of machinability. In order to increase the productivity and efficiency in th NC machining of sculptured surfaces, this study carried out the qualitative linearized evaluation about the ball end milling system and applied their practical expressions to the technological processor at the cutter path planning stage. The evaluated expressions were proved to be adequate for practical use from an accuracy point of view and the estimation models were applied to sculptured surface machining processes for finding variable machining conditions. Consequently, it was recognized that variable machining conditions bring about the dispersion of force system and the reduction of machining time by more than 50%.