• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1992.11a
• /
• pp.63-76
• /
• 1992

금속재료에 경도가 큰 TiN을 코팅하면 우수한 내마모성능을 얻을 수 있기 때문에, 이 TiN 코팅은 절삭공구나 금형등의 수명을 향상시킬 수 있는 방법이라고 기대를 모으고 있다. 특히 최근에는 물리증착법이 개발되어, 비교적 낮은 온도에서 연화되는 재료에도 코팅할 수 있게 됨에 따라, 엔드밀, 드릴등의 고속도강계의 절삭공구나 금형등의 수명을 크게 향상시킬 수 있는 방법으로 이 TiN코팅이 커다란 주목을 받게 되었다. 그러나 이 TiN 코팅이 미끄럼중에 어떻게 마모되는지는 아직도 잘 알려지지 않고 있다. 본 연구의 목적은 고속도강에 코팅된 TiN의 마모기구를 실험적으로 관찰하여 규명하는 것이다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.424-432
• /
• 1989

A mathematical model is developed for determination of the dynamic cutting force from static cutting data. The dynamic cutting force is analytically expressed by the static cutting coefficient and the dynamic cutting coefficient which can be determined from the cutting mechanics. The proposed model is verified by the chatter stability charts. A good agreement was shown between the stability limits predicted by the theory and the critical width of cut determined by experiments. The static cutting coefficient dominates high speed chatter stability, while the dynamic cutting coefficient dominates low speed chatter stability.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.155-159
• /
• 1993

최근 많은 생산 시스템의 자동화에 있어서 기계의 상태 진단 및 감시는 설비의 중요도 및 특수성를 고려할때 매우 중요한 비중을 차지하게 되며, 생산 작업을 최적화할 수 있는적당한 제어기술의 필요성과 그에 대한 관심이 날로 증가 하고있는 실정이다. 특히 가공분야에서 많은 부분을 차지하고 있는 절삭가공작업은 기구의 구성이 복잡하고 불확정한 요인을 포함하고있으며 공구의 파손이나 채터진동에 의한 공작물의 정도의 변화가 급속히 발생하기 때문에 이를 위하여 인프로세서 감시가 절실히 요구되고 있다. 그러므로 비정상적인 절삭을 사전에 감지하여 대처함으로써 최적의 작업조 건하에서 안정된 절삭을 할 수 있고 공작기계의 유지, 보수에 경제적인 절감을 기대할 수 있다. 본 연구에서는 2차원 절삭과정중에 발생하는 채터진도에 있어서 절삭 파라메타와 AE 신호와의 관계를 실험적으로 규명하며, AE를 이용한 절삭과정을 모니터링 할 수 있는 방법에 대하여 연구한다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.05a
• /
• pp.135-140
• /
• 2003

산업이 고도화됨에 따라 각종 기계·기구에 사용되는 부품의 고정도가 요구되면서 기존에 공구와 가공물이 직접 접촉하면서 절삭하는 가공방법으로는 절삭력에 의한 변형과 마찰열로 인하여 고정도 가공을 실현하는데 많은 어려움이 생기게 되었다 이러한 절삭가공법 중 연삭가공은 주로 가공물의 마무리에 이용되는 가공법으로서, 비교적 정밀하고 양호한 표면의 품위가 요구되어지는 부품에 사용되어왔다.(중략)

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.131-137
• /
• 1986

Cutting oil cools the chip and a tool as well as lubricates the chip-tool interface, the flank and machined surface. Rehbinder effect has been known as a phenomenon, the reduction of mechanical strength, when the metal is exposed to a polar organic environment or the surface of metal is coated with some polar organic substances. About the cause of Rehbinder effect there have been many different ideas by Rehbinder, Shaw, Barlow, Sakida and etc. In this report, the efect of polar organic substance( $C_{6}$ $H_{5}$C $H_{3}$+ $C_{6}$ $H_{4}$(C $H_{3}$)$_{2}$+ $C_{4}$ $H_{9}$OH+ $C_{6}$ $H_{12}$ $O_{2}$) (magic ink) upon the mechanism of chip formation on the orthogonal cutting of copper and mechanical properties of the work material are experimentally discussed with various rake angles. As expected no lubrication action could be noticed, but the shear angle increased and the cutting force and shear strain on the shear plane decreased, therefore the work material must be embrittled under polar organic substance.substance.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.16 no.1
• /
• pp.11-17
• /
• 2007

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.433-442
• /
• 1989

Owing to the development of CNC machine tools and automatic programing software, the milling process with ball-end mill has become the most widely used process where three-dimensional precision machining is important. In this study, the ball-end milling process has been analyzed and a cutting force model has been developed to predict the cutting force acting on the ball-end mill on given machining conditions. The development of the model is based on the analysis of geometry of a ball-end mill an the oblique cutting process. The cutting edges of ball-end mills are considered as a series of infinitesimal elements and the geometry of the cutting edge element each cutting edge element is straight. The oblique cutting process in the small cutting edge element has been analyzed as orthogonal cutting process in the plane containing the cutting velocity vector and chip-flow vector. Hence, with the orthogonal cutting data obtained from orthogonal turning test, the cutting forces can be predicted through the model. The predicted cutting forces has shown a fairly good agreement with the test results in various plane cutting conditions.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.3
• /
• pp.73-79
• /
• 2002

This paper presents the experimental results to verify the environmental consciousness with economic balances due to cutting fluid behaviors, effectiveness in machining process. Even though cutting fluid improves the Productivity through the cooling, lubricating effects, its environmental impact is also increased according to the cutting fluid usage. The primary mechanism considered in this study is the spin-off motion of fluids away from rotating workpiece. In this study some parameters arc adopted to analyze the productivity(tool wear), environmental impact(mist diffusion rate). The results present talc criteria for the resonable cutting fluid usage quantitative1y to develop the environmentally conscious machining process.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.50-57
• /
• 2003

This paper presents the experimental results to verify the atomization characteristics and environmental impact of cutting fluid. Even though cutting fluid improves the productivity through the cooling, Lubricating effects, environmental impact due to cutting fluid usage is also increased on factory shop floor Cutting fluid's aerosol via atomization process can be affected human health risk such as lung cancer and skin diseases. Experimental results show that the generated fine aerosol which particle size less than 10 micron appears near working tone under typical operational conditions. The aerosol concentration also exceeds NIOSH regulations. This research can be provided a basis of environmental impact analysis fur environmental consciousness.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.11a
• /
• pp.99-104
• /
• 1998

산업현장에서 많이 쓰이는 절삭설비(Metal Working : MW)는 매우 다양하여 일일이 열거하기는 어렵고 주로 자동차생산업종, 농기구제조업종, 각종 기계기구 생산업종, 경금속가공업종 등에서 매우 광범위하게 사용되고 있다. 이들 업종에서 연마, 절단, 천공, 드릴링, 터닝(turning)등을 수행하는 많은 근로자들이 다량의 MWF(Metal Working Fluids) 뿐만 아니라 열악한 소음환경에 노출되고 있다. (중략)