• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.3 no.1
• /
• pp.145-159
• /
• 1995

정확한 고도, 속도의 측정은 항공기의 효율적인 운영과 안전에 필수적이다. 정확한 고도의 측정은 지형 장애물의 회피와 항로상에서 최저 수직 고도 분리를 유지하기 위해 절대적으로 필요하다. 또한 정확한 속도의 측정은 저속(실속상태)에서 조종상실을 피하고 고속에서 항공기의 구조적 한계와 공기 역학적 한계의 초과를 방지한다. 따라서 비행시험을 통하여 고도와 속도를 정확히 보정해줌으로써 비행안전과 재산상의 손실을 막을 수 있다.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.138-141
• /
• 2007

본 논문에서는 제작이 간편하고, 저렴하여, 설치가 용이한 Trihedral comer reflector를 연결하여 전방향(omni-directional)에서 전파를 입사방향으로 반사하도록 전파반사기를 설계한다. Scale-down된 사각(Square) 형태와 원형(circular) 형태의 Retroreflector를 제작하고 RCS(radar cross section)의 각도별 패턴 특성을 측정하여 이론적, 수치 해석적 계산과 비교한 결과를 보인다. 측정된 RCS 절대 값과 패턴을 이론식 및 시뮬레이션 수치 해석 값과 비교하여 데이터의 적정성을 분석한다.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2003.09a
• /
• pp.35-35
• /
• 2003

목적 : 세기변조방사선치료의 정도관리 중 선량 분포의 비교에 관한 새로운 정량적인 방법을 제시하였다. 이 과정 중에서 선량의 기울기가 큰 영역에서의 문제점을 해결하기 위하여 최적화 알고리듬을 사용하였다. 대상 및 방법 : 필름을 통해 측정된 선량분포와 컴퓨터를 통해 구해진 선량분포를 각각 5mm 간격과 lmm 간격의 해상도로 컴퓨터를 이용해 2 차원 선량분포로 구현한다. 그 후 두 선량분포사이의 차이를 각 선량분 포의 원점을 일치시킨 후 구해낸다. 이때 일반적으로 두 선량분포 사이의 차이는 선량의 기울기가 큰 영역에서 상당히 크게 나타나게 되는데 이것은 측정 장비의 원점을 구하는 과정에서 발생되는 이차원 상의 미세한 원점의 불일치 효과로 선량의 차이가 선량의 기울기가 큰 영역에서 더욱 커지기 때문이다. 이 불일치를 보정하기 위해서, 측정된 선량분포를 계산된 선량분포 위에서 lmm 간격으로 이동시켜가면서 선량의 차이를 계산하여 이 값이 최소가 되는 위치를 확인한다. 이때의 이동치는 가속기가 갖는 허용오차 이내에 있어야 하며 이 값은 2mm로 알려져 있다. 이 과정과는 독립적으로 이온 챔버를 통해 측정된 절대선량 값을 이용하여 두 선량분포 사이를 재 규격화한 뒤 차이를 구하게 되면 우리는 5mm 간격의 2 차원 절대선량 분포 비교를 실험상의 오차들 중 가장 크게 작용하는 원점 오차로 인한 오차를 제거한 뒤 수행한 것과 같은 결과를 얻게 된다. 여기서 계산된 선량분포의 해상도는 장비의 허용오차 보다 항상 작아야 한다. 결과 : 머리와 목에 환부를 갖는 여러 환자들에 대한 선량분포 비교 결과를 통해서, 측정된 선량분포와 계산된 선량분포사이의 허용오차 범위에 대한 일시적 기준을 마련하였다. 이 기준은 물론 더 많은 환자들에 대한 선량분포 비교를 통해 개선되어질 수 있다. 결론 : 측정 장비의 원점 불일치의 보정뿐만 아니라 측정 장비의 회전에 의한 오차 보정, 필름의 광학적 밀도에 관한 보정 등 여러 가지 계통적 오차들에 대한 보정들이 선량분포 확인과정의 이해와 그 기준마련에 도움이 되겠지만 우리가 다룬 원점 불일치에 비해서 상대적으로 무시할 수 있었다. 마지막으로 선량분포 확인의 최종목표인 3 차원 선량분포 확인의 실제 적용을 위한 연구가 최적화 알고리듬을 이용하여 실험 중에 있다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.95-103
• /
• 2016

The absolute value management method is widely used in the most of the earth retaining construction, which evaluates the safety by comparing measurement result and management criteria. Therefore, the management criteria is the standard to evaluate the safety of the site, and in other words, the criteria is a direct factor of the evaluation. That means that the safety of the site can not be acquired if the management criteria is not proper, even though the measurement system is perfectly set. However, many of field technicians do not have rely on the current management criteria, and they even recognize the necessity of the revision. Therefore, in this study, the necessity of the revision was studied. Also, the optimum criteria selection and the application were performed based on the test results of earth retaining deflection and probabilistic theory. The absolute value management method was used for this study. The details are tabulated.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.481-492
• /
• 2018

We conducted TL/OSL dating for the earthenware kilns in the Bongsan-ri archaeological site, Osong, which was occupied from the late nineteenth to the late twentieth century. With the SAR-TL/OSL method, paleodose was determined from the equivalent dose during the burial period($ED_{burial}$), the background dose($ED_{BG}$), the fading correction factor(f), and the overestimation correction factor(C). The annual dose rates and their provenance were evaluated from the measurement of natural radionuclides $^{238}U$, $^{232}Th$, and $^{40}K$. Because the comprehensive absolute age was provided by combining the resulting TL/OSL and radiocarbon data, we concluded that, for the absolute chronology of a modern archaeological site, TL/OSL dating and radiocarbon dating must be carried out together and summed. The construction and occupation of earthenware kilns in the Bongsan-ri site had changed from stage I (No.5, 6 kilns), to stage II (No.1, 2, 3 kilns), to stage III (No.4) in chronological order. When Bayesian statistics were applied, we found that the absolute ages of occupation for stages I, II, and III correspond to AD $1910{\pm}23$, AD $1970{\pm}10$, and AD $1987{\pm}4$. These results were in good agreement with the archaeological context or chronology.

• The KIPS Transactions:PartD
• /
• v.15D no.3
• /
• pp.305-312
• /
• 2008

Web documents with useful information are widely available on the internet and they are accessible with web search service. For this reason, web search services study better ways to collect more web documents, but have a difficulty figuring out the coverage of these web pages. This paper is intended to find ways to evaluate the current coverage assessment methods and suggest more effective coverage assessment technique that is, sampling internet web documents equally, monitoring how they are classified on web search services, in an attempt to assess both absolute and relative coverage of the web search engines. The paper also presents the comparison among Korean web search services using the suggested methods.the absolute and relative coverage was highest in Google followed by Naver and Empas. The result is expected to help estimating coverage of web search services.

• Journal of radiological science and technology
• /
• v.31 no.1
• /
• pp.83-87
• /
• 2008

The purpose of this study is to get the correction factor to correct the measured values of the absolute absorbed dose proportional to the water equivalent depth. The measurement conditions in white polystyrene and water phantoms for 10MV X-ray beam are that the distance of source to center of ionization chamber is fixed at SAD 100 cm, the field sizes are $10{\times}10\;cm^2$, $20{\times}20\;cm^2$ and the depths are 2.3 cm, 5 cm, 10 cm, and 15 cm, respectively. The mean value of ionization was obtained by three times measurements in each field size and depths after delivering 100 MU from linear accelerator with output of 400 MU per min to the two phantoms. The correction factor and the percentage deviation in TPR were obtained below 0.97% and 0.53%, respectively. Therefore, we can get high accuracy by using the correction factor and the percentage deviation in TPR in measuring the absolute absorbed dose with the solid water equivalent phantom.

• Convergence Security Journal
• /
• v.6 no.1
• /
• pp.55-63
• /
• 2006

In this paper, an algorithm that provisions absolute differentiation of packet delays is proposed with an objective for enhancing quality of service (QoS) in future packet networks. It features an adaptive scheme that compensates the deviation for prediction on the traffic to be arrived continuously. It predicts the traffic to be arrived at the beginning of a time slot and measures the actual arrived traffic at the end of the time slot, and derives the deviation between the two quantity. The deviation is utilized to the delay control operation for the next time slot to offset it. As it compensates the prediction error continuously, it shows superior adaptability to the bursty traffic as well as the constant rate traffic. It is demonstrated through simulation that the algorithm meets the quantitative delay bounds and shows superiority to the traffic fluctuation in comparison with the conventional mechanism.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.335-341
• /
• 2015

Recently a demand for high precision absolute position transducer is increasing in order to control thickness in steel industry. LVDT (linear variable differential transformer) is widely used to measure the absolute position in the linearly moving cylinder under poor factory environment. In this paper we implement the three phase LVDT with a high resolution of one micron and L/D (LVDT to digital) converter. First we designed U, V, and W three phase signaling using FPGA. Second a pulse output algorithm is designed for position information with A and B phase waveforms. Finally the performance is compared with previous sensors. Experiments show that the linearity deviation error is 0.009788 [mm] and the average sinusoidal THD is 0.0751%, which means 2.2% and 33% more improved result than the previous sensors respectively.

• Journal of the Korean earth science society
• /
• v.27 no.2
• /
• pp.236-246
• /
• 2006

On the basis of field observation, geology of the footprints site consists of the Kwanghaeak Basalt, unnamed strata, Songaksan Tuff, Hamori Formation, and Sand Dune, in ascending order at the Hamori-Songaksan area and the Kwanghaeak Basalt, the hominid footprints-bearing strata, and Dune Sand are consisted in ascending order at the Sagaeri area. According to the designation that the Hamori Formation overlies the Songaksan Tuff, age dating results, and geologic sequence observed in the field, the strata containing hominid footprints are not correlated with the Hamori Formation but the unnamed strata, though the strata are shown as the Hamori Formation in the geologic map. It seems to be more reasonable that the geologic age of the footprints-bearing strata is thought to be around ca 15,000 yrs B.P. according to the results of $^{14}C$ dating.