• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.243-244
• /
• 2003

오존은 매우 불안정한 물질로서, 기타의 환경 대기 가스 분석법에서와 같이 해당 성분의 측정기를 표준 가스로 교정한 후 분석할 수 없다. 이러한 이유로, 환경 대기 중의 오존을 분석하는 일반 분석기의 교정을 목적으로, 본 연구실에서는, 국가 일차 오존 표준분광기(O$_3$-SRP)를 제작하여 운영하고 있다. 운영되고 있는 $O_3$-SRP의 측정 원리는 자외선 흡광 광도법이며, 농도값의 결정은 순수하게 Beer-Lambert 법칙에 따른다. Beer-Lambert 법칙에 따라서 오존 농도를 절대적으로 측정하기 위해서는 몰 흡광계수, 광로의 길이, 투과도, 온도 및 압력을 정확히 측정하여야 한다. (중략)

• The Journal of Korean Society for Radiation Therapy
• /
• v.23 no.1
• /
• pp.51-58
• /
• 2011

Purpose: In this study, we tried to check the usefulness of two Linear Accelerators, Clinac IX and 21EX (Varian, Palo Alto, CA), which are equipped in Ajou Medical Center. From 2008 to 2010, we evaluated the error range of Absolute Dose based on the daily output, which was measured by CHECKMATE$^{TM}$ (Sun Nuclear, Melbourne, FL). Materials and Methods: For Daily Q.A, photon beams of two linear accelerators, 21EX and IX (6 MV and 10 MV, respectively) were measured daily by using CHECKMATE$^{TM}$ just before the treatment began, while the absolute dose was measured biweekly by using water phantom. We analyzed the data of measured values from the daily Q.A and the absolute dose from 2008 to 2010 for 21EX, and from 2009 to 2010 for IX. We utilized Excel 2007 (Microsoft, USA) to evaluate Average, Standard deviation and Confidence level of the data. Furthermore, in order to check the measured values of CHECKMATE$^{TM}$ and the significance of absolute dose, each error value was compared and analyzed. Results: During the observation period, the output of two equipment's absolute dose increased in process of time and in both 6 MV and 10 MV, there was a similar increasing trend. In addition, the error rate of the measured value of CHECKMATE$^{TM}$ and the value of absolute dose were under 0.34, which means that there is a similarity relationship between the two measured values. After checking that the measured value of CHECKMATE$^{TM}$ increased, We measured the absolute dose to adjust that. When the error range was close to 2~3%, the number of changing the output was four for 21EX and three for IX. Conclusion: As a result of measuring and analyzing the daily output changes for two years by using CHECKMATE$^{TM}$, we could find that there is a significance between the output which we should obey during Q.A, and the measured value of absolute dose within the error tolerance of 2~3%. Thus, the use of CHECKMATE$^{TM}$ can be positively considered for more efficient and reliable daily output verification of linear accelerator. It can also be a good standard for other medical centers to understand the trends of linear accelerator and to refer to for the correction of each output.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.5
• /
• pp.393-397
• /
• 2007

Eddy current standard including an artificial slot for the calibration of absolute type surface probe was fabricated. Developed eddy current standard has the electric conductivity and dimensions, and contains artificial slot as established in ASTM E 1629. The width and depth of artificial slot are 0.1 mm and 0.5 mm respectively. This slot was only possible to measure the depth on the two side edges, and impossible for the middle part with general measurement tools. The ultrasonic test method was applied for measuring depth of the middle part of the artificial slot in the standard. Using this method the dimension could be measured successfully with uncertainty about $15\;{\mu}m$. Calibration of eddy current standard for the absolute probe can be performed by this technique.

• Korean Journal of Optics and Photonics
• /
• v.28 no.6
• /
• pp.339-345
• /
• 2017

The flatness of a reference flat plays an important role, from the calibration of an interferometer to the reference for a semiconductor or flat-panel display, etc. Especially if we order the flatness measurement outside Korea, we may spend more time and money. In this paper, we measured the flatness of a reference flat using a three-flat test, which is one of the absolute measurement methods, and calculated its measurement uncertainty. In the three-flat test we adopted, each flat is tested against another flat, with three unknown flats, using an interferometer. Among several three-flat tests, we adopted Griesmann's method which has a low measurement uncertainty and is less dependent on the experimental equipment. As a result, the measurement uncertainty was found to be less than 0.5 nm rms, which is very accurate for high-tech industrial applications.

• The korean journal of orthodontics
• /
• v.30 no.1 s.78
• /
• pp.1-7
• /
• 2000

It is important that the orthodontist accurately assess the degree to which facial asymmetry contributes to a given malocclusion before treatment planning. P-A, submentovertex and verticosubmental view have been used in the assessment of facial asymmetry. Among them, submentovertex view is rarely used because it has low reproducibility and is short of normal data and proper analysis method. The purpose of this study was to develop a submentovertex cephalomentrics and obtain normal data in Korean adults. The subjects consisted of 40 normal adults (male : 22, female 18) without the experience of orthodontic treatment. We find the 2 angular and 9 linear measurements. Though submentovertex cephalomentrics has the limitation in comparing the absolute length between right and left, it is useful to examine the relationship of skeletal and dental midline, the shape and location of condyle head and the shape of mandibular body in submentovertex view Therefore, if we understand the limitation of submentovertex cephalomentrics and use lateral , P-A and submentovertex cephalomentrics together, we will measure the location and amount of skeletal disharmony more exactly.

• Journal of the Korean Society of Radiology
• /
• v.12 no.6
• /
• pp.769-776
• /
• 2018

According IEC 60601-1 ed3.1 and IEC 60601-2-45 regulation, diagnostic X-ray equipment should be display to measured and calculated air kerma area product. On the clinical X ray equipment, air kerma area product dosimeter would like to have an evidence for dosimeter accuracy and energy dependency. This study was performed to indirect calibration and energy dependency test for attached type air kerma area product (KAP) dosimeter by RQR standards beam quality. On the RQR5 beam quality, attached KAP dosimeter error showed -7.5%, respectably. On the RQR9 beam quality, attached KAP dosimeter error showed -10.4%, respectably. All RQR beam quality, average absolute error was $8.30%{\pm}2.85%$, respectably. On this study, attached KAP dosimeter was satisfied to IEC 60580 and AAPM TG 190. This calibration method of KAP dosimeter will help to performance maintain for clinical KAP dosimeter.

• The korean journal of orthodontics
• /
• v.28 no.3 s.68
• /
• pp.479-486
• /
• 1998

Bimaxillary Protrusion can be treated effectively in growing patients and in adults with conventional orthodontic therapy. However, In the adult patient, combined surgical and orthodontic treatment modalities may offer distinct advantages over such conventional therapy. In those cases complicate by vertical jaw dysplasia, sagittal dysplasia, or transverse skeletal discrepancy in addition to bimaxillary protrusion, the possibilities of obtaining successful results through orthodontic treatment alone greatly diminish. Surgical retraction of both maxillary and mandibular anterior segments with subapical osteotomies and ostectomies in the extraction site may be a good treatment alternative. Treatment time and possible adverse effects of lengthy orthodontic therapy may be reduced and optimum esthetic improvement may be facilitated. On the following cases, patient who had bimaxillary protrusion with Angle class III malocclusion was treated with combined orthodontic - surgical therapy by anterior subapical segmental osteotomies.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.2
• /
• pp.154-161
• /
• 2020

Purpose: To describe the clinical and radiology results of a surgical treatment for clinodactyly due to a longitudinal epiphyseal bracket. Materials and Methods: This study analyzed the records of 11 patients (27 case) with clinodactyly due to a longitudinal epiphyseal bracket who underwent an osteotomy or physiolysis between March 1999 and April 2017. The preoperative range of motion of the proximal and distal interphalangeal joints, the subjective satisfaction of the patient, and the degree of angulation to the ulnar side were examined. The patients were classified into two groups: osteotomy and physiolysis. The results were reviewed retrospectively and compared according to the surgical method. Results: The mean age of the patients who underwent osteotomy was 10.3 years. The average preoperative angle was 25.7° and the average postoperative angle was 13.5° the mean correction rate was 47.4%. The mean age of the patients who underwent physiolysis was 6.0 years the mean preoperative angle was 24.5° and the postoperative angle was 10.7°. The average correction rate was 59.4%. No significant difference in the correction angles was observed between the group who underwent the correction osteotomy and the group who underwent the osteotomy. In each group, the postoperative correction was statistically significant. The range of motion at the last follow-up was not significantly different from the preoperative range of motion. Conclusion: In patients with clinodactyly due to longitudinal epiphyseal bracket, osteotomy or physiolysis may be performed selectively according to age, bone age, and radiological progression. Both surgical methods showed good clinical results and deformity correction.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.11a
• /
• pp.207-210
• /
• 2012

본 논문에서는 스테레오스코픽 3D 동영상에서 왼쪽과 오른쪽 영상 사이의 프레임 동기가 맞지 않아 시청에 어려움을 주는 문제를 해결하기 위해서, 두 영상에서 물체의 움직임에 따른 차이를 이용한 프레임 동기화 방법을 제안한다. 제안 방식은 교정화 과정을 통해 수직 시차를 보정한 왼쪽과 오른쪽 입력 영상에서 각각 전 영상과의 차분 값에 대한 수평 방향 투영 프로파일을 구하고, 이들의 절대 오차에 대한 평균 (mean of absolute difference(MAD))를 계산해 최소값이 되는 프레임 조합을 찾아 프레임 동기를 맞추는 방법이다. 실험결과, 프레임 동기가 맞는 프레임 조합에서 최소 MAD 값을 기록하여 스테레오스코픽 3D 동영상에서의 프레임 동기화가 가능하다는 것을 볼 수 있으며, 특정 잡음이나 영상 압축 조건에 대해서도 동작함을 알 수 있다.

• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.452-456
• /
• 1993

The quantum efficiencies of photomultiplier tubes were measured by counting the coincidence photon pairs generated in the process of spontaneous parametric down-conversion. They were measured within 3% accuracy over the range of wavelength from 560 to 850 nm without any standard light source or detector. The values for 633 nm correspond to those obtained with a calibrated laser power meter within the measurement error.