• Title/Summary/Keyword: 절단 실험

Search Result 688, Processing Time 0.021 seconds

Study on the development of body marking method of Dark-banded rockfish Sebastes inermis (배지느러미, 아가미 뚜껑 절단에 의한 볼락 어체 표식방법 연구)

  • 명정구;노충환;조선형;박용주;이순길;홍경표;김창훈;안재만
    • Proceedings of the Korean Aquaculture Society Conference
    • /
    • 2003.10a
    • /
    • pp.140-140
    • /
    • 2003
  • 볼락을 대상으로 125일간의 어체 표식실험 결과 50% 절단 실험구에서 88.8~100%(평균 95.1%)의 재생율을 나타내었으며, 100% 절단 실험구에서는 55.4~92.5%(평균 76.4%), 요대골을 뽑은 실험구에서는 0~68.2%(평균 17.1%)의 재생율을 나타내었다. 배지느러미 절단법은 단기간 실험에 사용 가능하며 장기적인 실험에는 아가미 뚜껑 절단법이 가장 효율적인 것으로 나타났다.

  • PDF

Development and Performance of Cutting and Crushing Instrument of Hair to Prevent Blocking U-trap in Home Drainage System (하수구 막힘 방지를 위한 모발 절단 분쇄 장치 개발 및 성능평가)

  • Kim, Donhue
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.35 no.6
    • /
    • pp.394-399
    • /
    • 2013
  • The recalcitrant hairs which are accumulated in the U-trap equipped to prevent the stench from the drainage produce the phenomenon of blocking the flow of water through the home drainage pathway. The chemical dissolution solutions commercially manufactured are excessively poured into U-trap to solve this blocking problem. In this study, the specially designed instrument was developed for the experiments to cut and crush the hairs of which main component are the recalcitrant keratin proteins. The performance of the instrument for cutting and crushing hairs was investigated using experimental methods. The cutting and weighing method was used in order to obtain the average length of a large amount of hairs cut by instrument. This method is relatively simple to measure the weight of cutting hairs to obtain the average length of the fibers, the values of average length showed not greater tolerances. Also the average cutting number was defined to evaluate the performance of the cutting and crushing instruments designed for this study. We were able to apply these evaluation methods to provide the criteria to obtain the optimal structure of instrument and proper operation time in the given experimental conditions. These experimental methods and results will provide the good example to design and to analyze the various device that can be used for cutting the fibers. The cutting and crushing instrument developed in this study showed the effective abilities to cutting the hairs. The general using the cuttting and crushing instrument at every home would be helpful to prevent water environmental pollution.

Measurement and verification of pipe cutting power using Labview software (Labview 소프트웨어를 활용한 파이프 절단 파워 측정 및 검증)

  • Jang, Tae-ho;Kim, Youngshik;Jang, Tae-soo;Ryu, Bong-Jo
    • Journal of Digital Contents Society
    • /
    • v.18 no.7
    • /
    • pp.1387-1391
    • /
    • 2017
  • Cutting power estimation can be used to select appropriate actuators in the design process of machine tools. Therefore, accurate estimation of cutting power is an important part of the design process. In this study, pipe cutting power is first calculated theoretically using the slotting cutting power equation and then verified experimentally. In this case, a pipe cutting machine is used to cut two pipes made of different materials. Power consumptions in the motor during pipe cutting are measured by using the embedded software, Labview, and NI hardware. The slotting cutting power equation can thus be confirmed easily comparing theoretically calculated cutting powers with experimentally measured cutting powers. The pipe materials used in this study are SUS304 and AL6N01. The specific cutting power of AL6N01 material is proposed through our cutting experiment. As a result, this cutting power can be used to design machining tools for AL6N01 material.

Experimental Study on Cutting State of Glass by Ultrasonic Scriber (초음파 절단기에 의한 유리 절단면의 상태에 관한 실험적 검토)

  • Lee Chai-Bong
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.6 no.4
    • /
    • pp.212-216
    • /
    • 2005
  • In an ultrasonic glass scriber, the effect of ultrasonic vibration and its optimum driving frequency were investigated experimentally. To investigate the optimum ultrasonic frequency theoretically, the vibration model of the ultrasonic scriber is assumed. The frequency for maximum amplitude of acceleration is obtained theoretically. To investigate the depth of cutting edge corresponding the each frequency. The quartz glass plate specimen with a dimension of $200mm(L){\times}30mm(W){\times}3mm(T)$ is selected. The ultrasonic transducer is operated by the constant acceleration amplitude for the every frequency. The maximum crack depth was generated when the driving frequency was 18.35kHz. These results were in good agreement with those of the calculated model theoretically.

  • PDF

An Evaluation of Cutting Performance for Cutting Structural Steel using Charging Container (장약용기를 이용한 강재 절단 성능 평가)

  • Park, Hoon;Noh, You-Song;Suk, Chul-Gi
    • Explosives and Blasting
    • /
    • v.38 no.2
    • /
    • pp.13-21
    • /
    • 2020
  • The shaped charge was used in explosive demolition of a steel frame structure, but it was often not used because it was limited to use and impossible to supply at domestic and overseas. Existing linear shaped charge did not have sufficient cutting performance to cut steel frame structures with a huge scale and thick steel plate. To solve these problems, we produced a device that could generate metal jets using industrial explosives of high detonation velocity and pressure. In this study, we made a charging container of three types which applicable to explosive demolition of steel frame structures. The experiment of cutting performances was carried out to evaluate the effect of cutting of charging containers on the various thicknesses of the H-beam and steel plate. As a result of the experiment, sufficient cutting performance was confirmed.

EXPERIMENTAL STUDIES ON THE EFFECT OF RLN ANASTOMOSIS REMOVAL ON PHONATION (반회신경 문합과 후윤상피열근 절제가 발성기능에 미치는 영향에 대한 실험적 연구)

  • 김영모;이영구;이정식;이준열;김광문;김기령;홍원표;최홍식
    • Proceedings of the KOR-BRONCHOESO Conference
    • /
    • 1991.06a
    • /
    • pp.11-12
    • /
    • 1991
  • 편측 성대마비의 음성개선을 위하여 현재까지 알려진 치료방법은 teflon 또는 silicone 주입술, 외과적 성대 내전술, 갑상연골 성형술, 신경재식술, 등이 있으며, 근래까지는 Teflon 또는 Gelform 주입술이 제일 효과적인 방법이라 알려져 있으나, 이는 음의 높낮이 조절능력의 한계가 있고, 신경재식술의 결과 역시 만족스럽지 못한 경우가 많다. 따라서 저자는 발성기능의 생리학적인 측면에서, 보다 효과적인 음성개선의 방법을 찾기 위하여, 사람의 후두와 비교적 유사한 특성을 가진 개를 사용하여 실험을 하였다. 반회신경을 절단하여 편측 성대 마비를 유발한 뒤, 동측의 유일한 외전근인 후윤상피열근을 절제후 절단된 신경을 문합하여, 성대의 외전근 작용의 소실과, 발성시에 주로 작용하는 내전근만의 작용을 유도하여, 공동운동의 차단과, 내전운동의 향상을 기대하였다. 본 실험에 앞서, 임의적으로 신경을 자극시킬 수 있는 신경자극기와, 주위조직으로부터 신경만을 분리하여 자극할 수 있는 전극을 개발하여 사용하였으며, 또한 성대의 발성음을 임의대로 유발시킬 수 있는 생체 내 후두발성 모형(in vivo laryngeal phonation model)을 Moore(1987, 1988)등이 발표한 모형을 토대로 자체 개발하여 사용하였다. 실험은 13마리의 개를, 반회신경 절단군(3 마리), 반회신경 절단 및 후윤상피 열근 절제군(3 마리), 후윤상피열근 절제군(3 마리), 반회신경 문합 및 후윤상피 열근 절제군(4 마리)등으로 나누어 실험하였으며, 3 개월 후, 현수후두경, 후두 내시경, videolaryngoscopy, 신경자극 검사 등으로 성대의 내전운동 및 위치 변화의 관찰, 발성음의 음향분석 및 갑상피열근의 형태학적 변화를 관찰하여 다음과 같은 결과를 얻었다. 1. 반회신경 절단군과 반회 신경 절단 및 후윤상피열근 절제군은, 수술후 3 개월에 성대의 움직임이나 각도의 변화가 없었으며, 음향분석 결과 발성음이 아닌 잡음만이 포착되었다. 즉, 절단된 신경의 문합 없이 후윤상피열근 절제 만으로는 음성개선은 기대할 수 없었다. 2. 후윤상피열근 절제군에서는 수술 후 3 개월에 정상적인 성대의 내전운동이 관찰되었으며, 음향분석상 기본주파수 동요율 및 발성음의 강도는 약간의 증가를 보였다. 즉, 반회신경이 절단되지 않은 상태에서 후윤상피 열근 만을 절제하면, 발성음의 변화는 거의 없었다. 3. 반회신경을 절단후 문합하고 후윤상피열근을 절제한군 에서는 수술후 3 개월에, 성대의 정상적인 내전운동을 보였고, 음향분석상 수술직후에는 잡음만이 포착되었으나, 3 개월 후에는 잡음이 아닌 발성음을 들을 수 있었으며, 이 발성음의 기본주파수 및 강도는 수술전보다 감소되어 있었으나, 기본주파수 동요율은 증가되어 있었다. 즉 이 술식으로 인한 뚜렷한 발성음의 향상이 있었다. 이상의 결과로 미루어, 편측 신경 절단으로 인한 성대마비시, 절단된 신경을 봉합하고 성대의 유일한 외전근인 후윤상피열근을 절제하면, 공동운동의 차단과, 내향운동의 향상으로, 음성개선에 효과적이라고 사료되었으며, 이 방법이 편측 성대마비 환자의 효과적인 음성개선의 치료방법의 하나로 응용될 수 있으리라 생각된다.

  • PDF

Development of Charging Container for Cutting Steel Plate and Evaluation of its Cutting Performance (강재 절단을 위한 장약용기의 개발과 절단 성능 평가)

  • Park, Hoon;Min, Gyeong-Jo;Cho, Sang-Ho;Suk, Chul-Gi
    • Explosives and Blasting
    • /
    • v.36 no.2
    • /
    • pp.10-18
    • /
    • 2018
  • The shaped charge is used in explosive demolition of steel frame structure, but it was often not used because it was limited to use or impossible to supply at domestic and foreign. To solve this problem, we needed a device that could generate matal jets using industrial explosive. In this study, we made a charging container, which metal jets were generated when explosives were detonated. Cutting performance tests were carried out to evaluate the effect of cutting of a charging container on a steel plate of 25mm thickness. In addition, we compared the results between the numerical simulation of penetration process and cutting performance tests and then was evaluated a cutting performance for steel plates of 35mm and 70mm thickness.

Development of a Cutting Support Cleaning System considering the Dross Adhesion Characteristics (드로스 부착 특성을 고려한 절단 정반 크리닝 시스템 개발)

  • Kim, Ho-Kyeong;Ko, Dae-Eun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.15 no.10
    • /
    • pp.5919-5924
    • /
    • 2014
  • Accumulated dross adhered to the cutting support degrades the cutting accuracy and aggravates the working environment by reducing the efficiency of the dust collector. Furthermore, the cutting machine and product can be damaged by the scattering of molten metal. In this study, an attempt was made to increase the productivity of steel cutting process and improve the working environment by dross control. The dross adhesion characteristics were invested by a cutting experiment and the design concept for a dross removal machine was devised. Finally, a cutting support cleaning system and its operating algorithm were developed. The applicability of the developed system was examined and verified by a long-term field test after installation of the plasma arc cutting system of a shipyard.

A comparison study of inverse censoring probability weighting in censored regression (중도절단 회귀모형에서 역절단확률가중 방법 간의 비교연구)

  • Shin, Jungmin;Kim, Hyungwoo;Shin, Seung Jun
    • The Korean Journal of Applied Statistics
    • /
    • v.34 no.6
    • /
    • pp.957-968
    • /
    • 2021
  • Inverse censoring probability weighting (ICPW) is a popular technique in survival data analysis. In applications of the ICPW technique such as the censored regression, it is crucial to accurately estimate the censoring probability. A simulation study is undertaken in this article to see how censoring probability estimate influences model performance in censored regression using the ICPW scheme. We compare three censoring probability estimators, including Kaplan-Meier (KM) estimator, Cox proportional hazard model estimator, and local KM estimator. For the local KM estimator, we propose to reduce the predictor dimension to avoid the curse of dimensionality and consider two popular dimension reduction tools: principal component analysis and sliced inverse regression. Finally, we found that the Cox proportional hazard model estimator shows the best performance as a censoring probability estimator in both mean and median censored regressions.

Investigation of Stress Changes in Concrete and Strands according to Cutting Order of the Strands in Pre-tensioned Concrete Slab (프리텐션 슬래브 구조에서 긴장강선 용접절단순서에 따른 긴장재 및 콘크리트의 응력변화 고찰)

  • Moon, Do-Young;Kim, Jang-Ho;Kim, Gyu-Seon;Yun, Man-Geun;Zi, Goang-Seup
    • Journal of the Korea Concrete Institute
    • /
    • v.21 no.4
    • /
    • pp.419-429
    • /
    • 2009
  • This study focuses on the effect of the cutting order of prestressing strands on the strain change in the strands and on the state of stress of concrete, experimentally and numerically. In the experiment, strain of strands and of transversal reinforcement were measured for three different cutting orders during detensioning process by using flame-cutting procedure. The experimental results were compared with those obtained from the FE analysis. As a results of the experiment, it is confirmed that the cutting order of prestressing strands affected on the strain of strands as well as of transversal reinforcement. The FE analysis gave similar results to those obtained from the experiment. Therefore, the cutting order should be chosen appropriately to when the strands get detensioned.