• The Journal of the Korea Contents Association
• /
• v.6 no.2
• /
• pp.162-168
• /
• 2006

This paper presents a high performance CORDIC circuit based on redundant numbers yielding a minimal number of iteration stages. The minimal number of iteration stages reflects the iteration number yielding a smaller computation error than the truncation error. The minimal number of iterations is found n-4 for $n\geq16$, where n is the number of input angle bits. The CORDIC circuit is based on a redundant number system with a constant scale factor The circuit performs sine and cosine calculations with a delay of {5 (n-4)+ 2[$log_{2}n$]}$\DeltaT$.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.993-996
• /
• 2008

It has been reported that destruction test by core collection is the most reliable of the structural concrete strength in present building construction field. But it causes low efficiency by damage and cutting in structure due to the core collection. It also has some problems in repairing. Additionally in case of strength test with management specimen, different environment compared to the structure environment cause problems about estimation precise structure strength. Therefore, it is required to develop structure direct strength test that has test values and credibility above the ones obtained by core specimen collection strength test and seasonal specimen test to suggest a reasonable and practical management method of structural concrete.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.21-26
• /
• 2014

When iodine container for dental mouth treatment is opened, thread for treatment is cut by the blade in cap of container. Due to the problem of corrosion in a short period time after the reaction of metal blade to iodine solution, it gives impact on patient hygiene. In order to solve the problem, alternative products such as ceramic blade are developed and produced recently. In case of ceramic blade, it is produced by handwork and machine work. In this study, for the quantity production of ceramic blade with powder injection molding, we proposed a delivery system to have uniform charge of 20 cavity. Using Moldflow, simulation on 20 Cavity flow was performed. And then the mold was obtained through mold production and modification.(based on simulation) After injection molding, debinder, sintering process was achieved for ceramic blade, and the cap product was completed via insert injection on ceramic blade. In this study, we verified possibility of quantity production of ceramic blade which showed effective performance for cutting.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.86-94
• /
• 2009

An idea to improve the performance of error correction with the amplification of input symbol errors is proposed to ease the mismatching problem which occurs in the hardware implementation of the differential analog PRML decoder. The differential analog PRML decoder is the decoder with two blocks of trellis diagram one of which is without branches of "0" and the other one is without the branches of "1". Decoding is performed by comparing the outputs of two blocks. The decoding error is likely to occur when the difference of two outputs is very small and the hardware implementation is not precise due to mismatching. The proposed idea is to increase the discrimination margin for the output "0" and "1" by amplifying the symbol error while the larger path metrics are saturated. To show the performance improvement of decoding with the proposed idea, simulation results are included

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.115-115
• /
• 2017

2013년 국내 시설(비닐, 유리 온실)에서 재배되는 토마토, 풋고추, 파프리카의 생산량은 총 632,315 톤으로 잎, 줄기 등 발생되는 부산물은 수확량의 약 30%에 해당되는 189,695 톤으로 추정되며 대부분 노지에 방치 유실되거나, 소각 처리된다. 본 연구에서는 이처럼 단순 폐기되는 농업폐기물을 재활용한 고형연료 제조에 필요한 건조장치를 개발하고 실험을 통해 그 성능을 확인하고자 하였다. 연구를 위해 건조용량 100 kg/hr인 실험실용 건조기를 제작하였다. 경상남도 진주시 농업기술원 온실에서 재배되는 파프리카, 토마토, 딸기, 가지, 고추 등의 부산물을 실험원료로 사용하였다. 원료성상, 원료이송방식, 송풍량, 건조온도, 건조시간에 따른 부산물 건조특성을 파악하였다. 원료를 비교적 짧게 절단하고 열풍이 배출되는 다공판위를 견인형 컨베어로 이송시키는 형태의 경우 건조실험 결과 세절된 원료에서 추출된 내부 수분이 외부로 유출되어 원료들 사이의 공극을 채워 건조공기가 원료층을 통과하지 못하게 하고, 특히 $100^{\circ}C$ 이상 고온에 노출되는 경우 원료표면에 잔류하는 유출 수분이 건조되면서 막을 형성하여 내부 원료들은 전혀 건조가 되지 못하는 현상이 관측되었다. 이러한 원료내부의 공극형성 불량으로 국부적으로 공기가 통과되는 부분만 집중적으로 급격한 건조가 진행되고 공급된 건조공기 대부분이 이 부분으로 유출되어 효과적인 건조가 전혀 진행되지 못하였다. 피건조물 사이의 공극형성을 위해 원료를 절단하지 않고 수행한 건조실험 결과 건조 풍량 및 온도에 따라 건조속도 및 처리용량이 다르게 나타나는 것을 알 수 있다. 특히 송풍량과 압력을 증가 시킨 건조 결과로 건조 상하층 간 불균일 건조 해소 및 건조속도, 건조능력에서 연구목표 치를 상회하는 결과를 보여준다. 특히 건조공기온도 $150^{\circ}C$ 이하에서 풍량을 증가시켜서 원하는 건조작업 수행이 가능함을 확인할 수 있었다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.65-65
• /
• 2012

The air texturing공정은 노즐에서 전달되는 초음속 에어기류에 의해 overfeed를 수반하여 yarn속 fiber가 뒤얽혀 loop와 crimp를 발달시키는데, 고강력 고탄성율 고내열성 내절단성 등의 특성을 가지는 아라미드섬유를 에어 가공사로 가공 할 경우 가공 전 필라멘트 상태일 때 보다 표면에 생기는 loop로 인하여 촉감이 좋아지고 또한 타 소재와 접착 시 접착제 담지 성능이 향상 되어 접착력이 상승되고, 이를 통해 보강재로서의 기능이 강화되는 반면 역학물성이 기존의 아라미드 보다 저하되는 약점을 가지고 있어 최근 ATY 공정조건이 ATY 사의 구조와 물성변화에 미치는 영향에 대한 많은 연구결과가 발표되고 있다. 본 연구에서는 Aiki air jet texturing machine에서 $Heracron^{(R)}$ para-aramid(840, 1000d, 1500d)를 사용하여 ATY nozzle의 직경을 0.6, 0.75, 1, 1.2mm로 변화를 주어 12개의 para-aramid ATY 시료를 제조하여 이들의 섬도, 강신도, 초기탄성률, 열수축률 그리고 형태불안정성(instability)등의 물성변화를 분석하여 다음과 같은 결과를 얻었다. 노즐의 직경이 증가함에 따라 사 내의 filament간의 움직임이 자유로워 교락이 증가하고 루프가 형성되어 단위길이 당 mass가 커지므로 섬도가 미세하게 증가하는 것을 볼 수 있다. 또한 직경이 증가할수록 절단강도와 초기탄성률은 감소하고 절단신도가 증가하는 경향을 볼 수 있는데 이는 축 방향으로의 배열이 적어져 하중을 분담하는 portion이 감소하고 사의 loop형성이 많아짐으로서 상대적으로 인장력에 대응하는 fiber의 수가 적어지기 때문으로 사료된다. 이는 현미경 관찰로 확인할 수 있는데 직경이 증가함에 따라 사의 loop의 엉킴이 증가하고 filament가 조밀한 것을 확인할 수 있다. 직경 변화에 따른 건 습열 수축률은 1% 미만의 매우 낮은 값으로 영향을 받지 않는 것을 확인 할 수 있는데 para-aramid의 열적특성의 안정성에 기인하는 것으로 사료되며 ATY의 불안정성은 노즐 직경 증가에 따른 어떤 경향성을 찾아볼 수 없었지만 840d, 1000d, 1500d로 섬도가 증가함에 따라 사의 불안정성이 증가하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2399-2404
• /
• 2009

In cellular network systems one of the most significant quality metrics to measure quality of performance is the average number of call drops in a system. It ensures that the active calls in the system are successfully completed without being dropped in the mid communication for ultimate customer satisfaction. Hand-off mechanism increases cellular system reliability by seamless continuation of active calls by transferring active calls from one base station to another. In this paper, we study and propose a simple hand-off mechanism using game theory. We conclude that using the simple QoS utility function proposed in this paper, our optimal deterministic hand-off strategy is to transfer the active calls to the base station with greater signal-to-interference ratio (SIR) and greater number of available channels.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.9
• /
• pp.6-12
• /
• 2011

In this paper, we propose a design method for a reliable and improved field-installable optical connectors(FIOC) which are needed for long-distance and low loss FTTH configuration. To this end, we optimize the angle of splicing between the inner fiber and the field fiber of the FIOC, so that the low loss connection of optical fibers is possible without using any angle alignment tools as well as angled cleavers. More precisely, we set the cutting angle of the inner filber and the field fiber to be $2^{\circ}$ by using an angled cleaver and $0^{\circ}{\sim}1^{\circ}$ by using a general fiber cutter, respectively. Splicing these two optical fibers without any further adjustment, we can keep the insertion loss within 0.3dB and the reflection loss within -60dB.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.6
• /
• pp.529-534
• /
• 2014

Pyrotechnic devices are widely used for space appendages. However, a cube satellite requirements do not permit the use of explosive pyrotechnic device. A nichrome burn wire release has typically been used for holding and release of deployable appendages of the cube satellite due to its simplicity and low cost. However, relatively low mechanical constraint force and system complexity for application of multi-deployable systems are disadvantages of the conventional mechanism. To overcome these drawbacks, we developed a hinge driving segmented nut type holding and release mechanism based on the nichrome burn wire release. The functional performance of the mechanism has been verified through release function test, static load test and shock level measurement test.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.921-924
• /
• 2008

Several techniques, including transmission X-ray photography and AC-impedance spectroscopy, are available for evaluating the fiber dispersion in a fiber reinforced concrete Evaluating the fiber dispersion in fiber reinfored concrete needs since the fibers bridge crackseffectively. However, these equipment is very expensive. Therefore this paper presents the quantitative evaluation method based on the image analysis of sectional image taken using an ordinary digital camera. After detecting the fiber accurately, the fiber dispersion characteristics are represented by the coefficient such as the fiber dispersion coefficient, the number of fibers in unit area, and the distribution of the fiber orientation. Test were performed to evaluate the effectiveness of proposed method and the dispersion characteristics of fibers according placing method and flow direction. Additionally, the effect of fiber dispersion characteristics on mechanical properties was investigated. Test results shows that fiber aligned along the flow direction and more fibers placed and dispersion was better on the section parallel to the flow direction. And about 50% difference in the flexural tensile strength according to the placing method occured.