• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.257-268
• /
• 2007

The development of Human Computer Interface has been relied on the development of technology. Mice and keyboards are the most popular HCI devices for personal computing. However, device-based interfaces are quite different from human to human interaction and very artificial. To develop more intuitive interfaces which mimic human to human interface has been a major research topic among HCI researchers and engineers. Also, technology in the TV industry has rapidly developed and the market penetration rate for big size screen TVs has increased rapidly. The HDTV and digital TV broadcasting are being tested. These TV environment changes require changes of Human to TV interface. A gesture recognition-based interface with a computer vision system can replace the remote control-based interface because of its immediacy and intuitiveness. This research focuses on how people use their hands or arms for command gestures. A set of gestures are sampled to control TV set up by focus group interviews and surveys. The result of this paper can be used as a reference to design a computer vision based TV interface.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.6
• /
• pp.77-86
• /
• 2013

Embankments on soft ground experience significant deformation during time-dependent consolidation settlement, as well as an initial undrained settlement. Since infinitesimal strain theory assumes no configuration change and minute strain during deformation, finite strain analysis is required for better prediction of geotechnical problems involving large strain and geometric change induced by imposed loadings. Updated Lagrangian formulation is developed for time-dependent consolidation combining both force equilibrium and mass conservation of fluid, and mechanical constitutive equation is written in Janumann stress rate. Numerical convergence during Newton's iteration in large deformation analysis is improved by Nagtegaal's approach of considering the effect of rotation in mechanical constitutive relationship. Numerical simulations are conducted to discuss numerical reliability and applicability of developed numerical code: deformation of cantilever beam, two-dimensional consolidation. The numerical results show that developed formulation can efficiently describe large deformation problems. Proposed formulation is expected to facilitate the upgrading of a numerical code based on infinitesimal strain theory to that based on finite strain analysis.

• Journal of Digital Convergence
• /
• v.15 no.8
• /
• pp.477-487
• /
• 2017

This paper releases strategies for firms that wish to enter into online circulation business in China. SWOT based on a Korean manufacturing company teaches us better way to approach Chinese online market. Chinese online market is under oligopoly, where Alibaba and Jingdong account for about 80% of the total market. Game theory is used as a measure of threat and opportunity between Korean manufacturer and Chinese online market retailer. Game shows that they are easy to accept opportunity and sales uplift rather than low risk. Analysis shows that Korean companies should improve its products and brand competitiveness in the offline market before entering into the Chinese online retail market. They need to prepare a localization model.

• Korean Journal of Optics and Photonics
• /
• v.28 no.6
• /
• pp.351-355
• /
• 2017

In this paper, we conduct a simulation of manipulating various pulsed laser operations through tuning the modulation depth of the saturable absorber in a laser cavity. The research, showing that various pulsed operations could be manipulated from Q-switching through Q-switched mode locking to mode locking by tuning the modulation depth of the saturable absorber in a cavity, has been studied by experimental means. We conduct a simulation with the Haus master equation to verify that these experimental results are consistent with expectations from theory. The time dependence of the gain was considered to express Q-switching fluctuation through applying a rate equation with the Haus master equation. Laser operation was manipulated from mode locking through Q-switched mode locking to Q-switching as modulation depth was increased, and this result agreed well with the theoretical expectation.

• Journal of Energy Engineering
• /
• v.18 no.2
• /
• pp.75-86
• /
• 2009

This paper studies examines the R&D efficiency in Korean energy industry by making multiple logistic regression of the product technological level with firms' endogenous technological efforts and cooperations for R&D between upstream and downstream firms. The technological level of Korean energy industry is analyzed to have been positively influenced by economy of scale effect and cooperations for R&D between upstream and downstream firms, but negatively impacted by firm size, and not impacted by competitive market structure, R&D investment, and R&D manpowers. The implications of this study are as follows: i) to heighten the technological level, domestic market would be transformed to be more competitive; ii) Korean Energy industry should make efforts intensifying R&D-related manpowers and investments; iii) although the firm size is analyzed to have negative impact on technological level, firms, lager or smaller, must be supported to accumulate technological capabilities; iv) R&D-cooperating efforts between upstream and downstream firms on the value-chain should be supported.

• Applied Chemistry for Engineering
• /
• v.25 no.6
• /
• pp.607-612
• /
• 2014

The physical properties of mercaptoundecanoic-acid layer formed on gold surfaces, which may affect the distribution of either gold particles adsorbed to the zirconium dioxide surface or vice versa, were investigated. To conduct this investigation, the surface forces were measured between the surfaces with respect to the salt concentration and pH value using atomic force microscope (AFM). The forces were quantitatively converted by the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory to the surface potential and charge density of surfaces. The converted-value dependence on the salt concentration and pH was described with the law of mass action, and the dependence was consistent with the theoretical prediction. It was found that the mercaptoundecanoic-acid layer had higher values for the surface charge densities and potentials than the $ZrO_2$ surfaces, which may be attributed to the ionized-functional-groups of the mercaptoundecanoic-acid layer.

• Journal of Adhesion and Interface
• /
• v.14 no.2
• /
• pp.57-67
• /
• 2013

The incompletion of TIR (Total Internal Reflection) in FTIR (Frustrated Total Internal Reflection) touch screen has been investigated as follows. Assuming a 3 layer thin film of medium1 ($n_1$)-medium2 ($n_2$)-medium3 ($n_3$) with refraction indices of $n_1=n_3{\neq}n_2$, it was theoretically proven that FTIR or OT (ordinary transmission) phenomena might happen through medium2 from medium1 to medium3 relying on relative difference in $n_1(=n_3)$ and $n_2$, and that the formulae for FTIR and OT could be transformed into each other depending on the number state (imaginary or real) of the light wave phase. In parallel to the theoretical analysis, the incompletion of TIR in acrylate due to external contacts was also elucidated from the experimental and phenomenological viewpoints. On the basis of this considerate work, we explained how to improve the touching performance for better FTIR touch screen.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2005.10a
• /
• pp.619-636
• /
• 2005

기술의 복합성이 증가하고 제품의 존속 수명주기가 불확실해지면서 기술개발자가 의도하는 바와는 관계없이 사업 영역과 기술기반의 변하고 있다. 이러한 환경 속에서 산업 내 기술의 특성을 분석하는 이른바 산업기술분석 역할은 매우 중요하다. 그러나 그 범위가 매우 광범위하고 그 중 기술개발에 있어 관련된 산업기술분석의 프레임이 구체적으로 적용된 사례를 제한적이다. 따라서 다양한 산업을 지원하는 정부 기술개발 기회의 경우, 반도체에 적용되는 모듈러 기반 기술개발 틀과 성과분석이 항공기, 지능형 로봇과 같은 복합 시스템 산업에 그대로 적용해왔던 것이 현실이다. 이는 기술을 제품화함에 있어 필수적인 개발시스템의 기술적 속성이 산업기술 분석 방법론에 효과적으로 체화되지 못했기 때문이다 본 연구는 시스템과 서브 부품으로 구성되는 제품설계 특성을 구조화한 제품 아키텍쳐 이론을 소개하고 이를 기술개발체계에 적용하는 실증적 연구를 수행한다. 실증적 분석을 위해 항공기 개발 전 과정을 분해하고 아키텍쳐 분석방법을 실제 적용하였다. 아키텍쳐는 대표적으로 모듈 형(Module)과 인테그랄 형(Integral)으로 구분한다. 실제로 한 가지의 제품 안에도 모듈형 부품과 인테그랄 형 부품이 복합적으로 혼합되어 있는 경우가 많다. 또한, 제품을 어느 레벨까지 분해할 지에 따라 모듈화의 정도도 달라 질 수 있다. 본 연구는 아키텍쳐 중 Integral 속성의 정도를 파악하여 아키텍쳐 정도를 파악하였다. 측정 기준으로 첫째, 타 부품과의 기능적인 상호연관성과 둘째, 체계종합 설계와의 상호의존성 두 가지를 설정하였다. 이러한 두 가지 아키텍쳐 기준을 547개의 항공우주 부품 및 기술을 적용해 본 결과, 항공기 개발과정은 총 $65\%$의 인테그럴 속성을 가지고 있으며 기술분야 별로 아키텍쳐 정도가 다르게 나타나고 있었다(전자 부품은 분야는 오히려 모듈형에 가까웠음). 비단 항공기 개발과정 뿐만 아니라 다른 산업, 제품에도 적용될 수 있는 틀을 마련함으로써, 기존 연구개발기회에서 산업기술 분석을 통한 체계적 기획으로 전환할 수 있는 새로운 대안을 제시한다. 결과적으로 산업기술의 특성과 구조를 반영한 기술개발 방법론으로 아키텍쳐 이론을 적용할 수 있는 단초를 마련했으며, 이것은 본 논문이 기대하는 바이기도 하다.

• Aerospace Engineering and Technology
• /
• v.1 no.1
• /
• pp.163-172
• /
• 2002

The turbine system composed of a nozzle and a rotor is used to drive turbopumps while gas passes through the nozzle, potential energy is converted to kinematic energy, which forces the rotor blades to spin. In this study, an aerodynamic design of a turbine system is investigated using compressible fluid dynamic theories with some pre-determined design requirements (i.e.,pressure ratio, rotational speed, required power etc.) obtained from a liquid rocket engine (L.R.E.) system design. For simplicity of a turbine system, impulse-type rotor blades for open type L.R.E. have been chosen. Usually, the open-type turbine system requires low mass flow rate compared to the close-type system. In this study, a partial admission nozzle is adopted to maximize the efficiency of the close-type turbine system. A design methodology of the a turbine system has been introduced. Especially, a partial admission nozzle has been designed by means of simple empirical correlations between efficiency and configuration of the nozzle. Finally, a turbine system design for a 10 ton thrust level of L.R.E is presented.

• Korean Journal of Optics and Photonics
• /
• v.19 no.4
• /
• pp.315-319
• /
• 2008

We investigate theoretically the power consumption of a notch filter using a thermo-optic long-period grating, which is induced by a heater array consisting of periodic heaters and pads made of metal thin-film. Since the power consumed by the heater array is converted to joule heat that generates the thermo-optic long-period grating, the characteristics of the notch filter are dynamically controlled by adjusting it. The power necessary for appropriate coupling efficiency depends on the parameters of the heater array, which are the width and length of a heater, pad width, and the thickness of the thin-film. We explain an approximate method of analyzing the influence of the parameters on the consumed power. Using the analysis method, we simulate the change of the power depending on the parameters. From the simulation, we suggest a few guidelines on the parameters required to reduce the power.