• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.11
• /
• pp.959-971
• /
• 2016

Hyper-Connected Society means the society that can network between human and human, human and devise, and devise and device transcending time and space. Therefore, the expansion of spectrum resources to provide wireless communications service is our most urgent task. So, radio waves act was amended recently. But, it take effort for drastic expansion of license-exempt spectrum, realization of spectrum usage liberalization, and rational improvement of the legal system that is separated the grant of spectrum and the grant of license to be accomplished. Therefore, this paper proposes amendment to radio waves act for joint use of radio frequencies and unified licenses.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.8
• /
• pp.853-860
• /
• 2012

In this paper, We shed light on radio spectrum policy and strategic planning of the United States of America and draw some conclusions. First of all, as the radio technology evolves with time, paradigm shift from command & control to market-based approach and spectrum commons is reviewed. Strategic spectrum planning of USA is also analyzed and some suggestions are drawn. In particular, USA plan for developing dynamic spectrum access(DSA) technologies and implementation of the test-bed for the DSA spectrum sharing is discussed, which improves the spectral utilization. Finally We deal with spectrum re-farming issue for mobile broadband and implicative points based on the National Broadband Plan.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.353-356
• /
• 2011

A Signal Receiving system to collect and analyze RF signals should be verified under simulated RF signal environment prior to verification on operation in fields and tested by using simulated RF signals in order to estimate its electrical performance. Generally, typical Signal Receiving system can measure, analyze frequency, pulse modulation, scan modulation, phase modulation on pulse, frequency modulation on pulse etc on RF signals. These RF signals should be generated from simulated RF sources in laboratory. Also the simultaneous RF signals should be simulated on laboratory. This paper describes the results of studying effective simulated RF signal source generation, the methods of the precise RF test signal generation in consideration of operational scenario.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.97-101
• /
• 2003

Mn-Zn ferrite microwave absorbers mixed with silicon for mobile phone were prepared and the effect of preparation temperature of specimens on absorption ability was studied. A sample with the thickness of 1 mm prepared at 70 $^{\circ}C$ showed excellent absorption ability of 3.4 ㏈ at 1.8 GHz which is a frequency band for mobile phone. A loss factor of tan $\delta$ > 1 is shifted toward lower frequency as increasing preparation temperature of specimens.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.4
• /
• pp.721-726
• /
• 2000

The remarkable progress of electronics and radio communications technology has made our life abundant. On the other hand, the countermeasure of EMC becomes more important socially according to the increased use of electromagnetic waves. It had been required that the absorbing ability of an electromagnetic wave absorber is mote than 20 dB, the bandwidth of which is required through 30 MHz to 1,000 MHB for satisfying the international standard about an anechoic chamber lot EMl/EMS measurement. From November of 1998, however, the CISPR11 has accepted the extended frequency band from 30 MHz to 18 GHz in the bandwidth of EMI measurement. In this paper, we proposed the cutting corn-shaped type satisfying the above requirements and carried out broadband design using the equivalent material constants method. Moreover, we have fabricated it and compared its characteristics with simulated one.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.97-101
• /
• 2006

In this paper, Multi-layer EM wave absorbers using Sendust are presented. The bandwidth of the Multi-layer Sendust EM wave absorbers over 10 dB is extended in S-Band And we investigated the mixing effects of $Al(OH)_3$ on Multi-layer Sendust EM wave Absorbers. As a result, the Multi-layer Sendust EM wave absorbers mixed with $Al(OH)_3$ showed a extended bandwidth over 10 dB compared with non-mixed Multi-layer Sendust EM wave absorbers in S-Band.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.3
• /
• pp.195-206
• /
• 1991

In this paper, we deal with the standard assesement of tariff rates for the locally originating electro-magnetic wave. By the propagation theroy. VIIF and the higher band are propagated within the line of sight and don't regarded with the orthers national property. If we use the EM wave for the telecommunication and other application shall be pay a utillzation trariff rate, reference for the assesement is caused by space division, frequency band requirement and utillizatilized interval period. If a rate of telecommunication leased line fee is impposed by using this one, and then reduotion rate are applied with public utility, total amout of incoming accont is guessed about ensured come govemental ppproppperty. It wiil task a ptomotive capitals for EM wave development.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.1
• /
• pp.9-16
• /
• 2009

In this paper, a method is proposed for the analysis of radiowave receiving characteristics of an ammunition with electric detonator. In this method, an ammunition with electric detonator is modelled as a receiving antenna with its gain obtained by computer simulation or measurement. The induced radiowave power is obtained by inserting the gain of the electric detonator in the antenna coupling formula. Radiowave receiving characteristics at very close distances are obtained by Treasuring the transmission coefficient between a half-wave dipole and the electric detonator model. Radiowave receiving characteristics of the electric detonator in a 105mm tank ammunition are obtained using the proposed method and the safety of the 900 MHz RFID reader on the detonator is assessed.

• Geophysics and Geophysical Exploration
• /
• v.25 no.4
• /
• pp.227-241
• /
• 2022

Full waveform inversion (FWI) in the field of seismic data processing is an inversion technique that is used to estimate the velocity model of the subsurface for oil and gas exploration. Recently, deep learning (DL) technology has been increasingly used for seismic data processing, and its combination with FWI has attracted remarkable research efforts. For example, DL-based data processing techniques have been utilized for preprocessing input data for FWI, enabling the direct implementation of FWI through DL technology. DL-based FWI can be divided into the following methods: pure data-based, physics-based neural network, encoder-decoder, reparameterized FWI, and physics-informed neural network. In this review, we describe the theory and characteristics of the methods by systematizing them in the order of advancements. In the early days of DL-based FWI, the DL model predicted the velocity model by preparing a large training data set to adopt faithfully the basic principles of data science and apply a pure data-based prediction model. The current research trend is to supplement the shortcomings of the pure data-based approach using the loss function consisting of seismic data or physical information from the wave equation itself in deep neural networks. Based on these developments, DL-based FWI has evolved to not require a large amount of learning data, alleviating the cycle-skipping problem, which is an intrinsic limitation of FWI, and reducing computation times dramatically. The value of DL-based FWI is expected to increase continually in the processing of seismic data.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.3
• /
• pp.3-8
• /
• 2009

주파수 공유 기술의 개발 및 적용은 실질적인 주파수 공급량을 확대하는 효과를 거두게 되어 주파수 자원의 희소성을 감소시켜 주는 긍정적인 효과가 있다. 그러나 현행 전파 관리 제도는 아직까지 공유 기술 적용을 위해 최적화되어 있지 않으므로 개발된 기술이 원활히 적용될 수 있도록 정부 차원의 정책 마련에 대한 검토가 필요하다. 본고에서는 주요한 전파 관리 정책의 모형에 대해 설명하고 공유 기술 적용을 위해 전파 관리 정책 측면에서 고려해야 할 사안들을 제시하고자 한다.