• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.6 s.97
• /
• pp.644-651
• /
• 2005

In this paper, a new predistortion method to reduce nonlinearity or a traveling wave tube amplifiers(IWTAs) is proposed. Nonlinear transfer characteristics of TWTA are analyzed using carrier complex power series. Inverse carrier complex power series or a predistortion linearizer to linearizer TWTA are also proposed. The inverse nonlinear distortion characteristics of predistorter can be realized with reflective structure that is composed of Schottky diode and resistive-terminated transmission line. The AM-to-AM and the AM-to-PM characteristics for TWTA by proposed predistortive linearizer on K-band were improved from -5.825 dB and -37.321^{\circ} to 0.786 dB and 6.742^{\circ}, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.4
• /
• pp.430-439
• /
• 2011

In this paper, we design a digital predistortion(DPD) for linearity enhancement of RF power amplifier operating in 900 MHz band. We verify improvement of linearity by comparing the proposed DPD using tanh as a nonlinear indexing function and the DPD using linear indexing function based on signal amplitude. The digital predistortion is realized by look-up table(LUT) method, and the Saleh model is employed for power amplifier modeling, then a commercial power amplifier module is used for measurement. The LUT has 256 tables, and the NLMS(Normalized Least Mean Square) algorithm was utilized for an adaptive algorithm for estimation. As a result, we improve the ACLR(Adjacent Channel Leakage Ratio) by around 15 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.5
• /
• pp.480-485
• /
• 2004

In this paper, a new predistortion linearizing method using frequency up-conversion operation of mixer is proposed. This linearizing method doesn't require any additional signal sources in spite of frequency up-conversion mixing operation. This method extracts the 2nd low frequency intermodulation distortion signal from input signals and uses the extracted 2nd low frequency intermodulation distortion signal as mixing signal source. To show validation of the proposed predistortion method, we made K-PCS power amplifier. On 2-tone signals amplification process, the (C/I) ratio of amplifier is improved 26 ㏈ (@Po=22 ㏈m/tone), where two tones are 1.8544 ㎓ and 1.8556 ㎓, respectively. And (C/I) ratio is improved more than to 20 ㏈ for 17 ㏈ output signal dynamic range. On IS-95A CDMA 1FA amplification process, the improvements of adjacent channel power ratio(ACPR) are 10.8 ㏈ and 6.4 ㏈ at ${\pm}$885 ㎑ and ${\pm}$1.25 ㎒ offset points, respectively.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.11b
• /
• pp.179-183
• /
• 1999

일반적인 통신 시스템에서 높은 전력을 가지는 출력 신호를 얻기 위하여 고전력증폭기(HPA)의 사용은 필수적이다. 그러나 HPA를 통과한 신호는 AM/AM 및 AM/PM의 비선형왜곡이 발생하는 단점을 가지고 있다. 그 결과 송신신호의 대역내 신호 스펙트럼이 왜곡되고 신호의 대역폭을 확장시켜 인접채널에 간섭을 유발한다. 본 논문에서는 HPA의 비선형 왜곡 특성을 보상하기 위하여 기저대역에서 룩업테이블(LUT)을 이용한 전치왜곡기의 동작 알고리듬을 제안한다. 먼저, LUT의 빠른 초기화를 위하여 송신신호로부터 HPA의 특성을 예측하여LUT를 초기화 시키는 알고리듬을 제안한다. 그리고 통신중에 HPA의 특성이 변화할 경우에 대비하여 평균자승오차를 최소화하는 적응알고리듬을 제안한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.1 s.104
• /
• pp.67-73
• /
• 2006

This paper proposes a new predistortion linearizer with controlling intermodulation distortion(IMD) signals. This linearizer achieves independent control of third- and fifth-order intermodulation distortion products using amplitude modulation with even harmonic signals. A vector modulator that modulate fundamental signal with both second- and fourth-order harmonic components generated by harmonic generator circuits, generates the inverse characteristics third-and fifth-order intermodulation signals of power amplifier and controls amplitude and phase of them with each other modulation factors. As a results, this linearizer is suppressed IMD signals of power amplifier effectively. The test results show that the third IMD is cancelled more than 25 dB and the fifth order IMD is cancelled about 18 dB for CW two-tone signals. Also, it's improved the adjacent channel power ratio(ACPR) more than 7 dB for IS-95 CDMA signals.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.4
• /
• pp.484-490
• /
• 2012

In this paper, we design a digitally pre-distorted RF power amplifier operating in 900 MHz band. The linearity of RF power amplifier is improved by employing the digital pre-distortion(DPD) based on affine projection(AP) algorithm, where the look-up table(LUT) method is used with non-linear indexing. The proposed DPD with AP algorithm is compared with that with normalized least mean square(NLMS) algorithm, applied to the RF power amplifier. A commercial power amplifier module is used for verification of the proposed algorithm which shows improvement of adjacent channel leakage ratio(ACLR) by about 21 dB.

• Journal of Advanced Navigation Technology
• /
• v.18 no.3
• /
• pp.229-235
• /
• 2014

This paper presents the Doherty power amplifier with a digitally controlled analog predistorter circuit of Scintera Corp. to produce high power efficiency and high linearity performance. The analog predistorter improves the linearity performance because of controlling amplitude and phase values of input signal in order to improve intermodulation performance of power amplifier. Also, the power amplifier is designed by the Doherty technology to obtain the high efficiency performance. To validate the Scintera's analog predistorter, we are implemented the power amplifier with Doherty method at center frequency 2150 MHz. Compared with the balanced amplifier, the power amplifier is improved above 11% enhanced efficiency and more than 15 dB ACPR improvement.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.53-56
• /
• 2003

A linear power amplifier is particularly emphasized on the CDMA system using a linear modulation scheme, because IMD which cause adjacent channel interference and co channel Interference is mostly generated in a nonlinear power amplifier. In this paper, a new type of linearization technique proposed. It is presented that balanced MESFET predistortion linearizer added. Experimental result are present for Korea PCS frequency band. The implemented linearizer is applied to a 30dBm class. A power amplifier for simulation performance. Two-tone signals at 1850 MHz and 1851.23 MHz are injected into the main power amplifier. The main power amplifier with a 12.1dB gain and a P1dB of 30 dBm(two-tone) was utlized. The reduction of IMD is around 22dB.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.11a
• /
• pp.60-62
• /
• 2016

이동통신 시스템의 OFDM(Othogonal frequency division multiplexing) 신호는 큰 PAPR(Peak to Average Power Ratio)을 가지기 때문에 비선형 특성을 가지는 전력 증폭기의 효율 감소를 가져온다. 이러한 전력 증폭기의 비선형 특성을 개선하여 효율을 증가시키기 위해서 전력 증폭기의 역 특성을 가지는 디지털 전치 왜곡기가 이용된다. 본 논문에서는 제곱근 근사를 이용한 Look-up Table(LUT) 기반의 디지털 전치왜곡(Digital Pre-Distortion :DPD) 기법을 제안한다. 제안하는 방식은 복소 이득(Complex Gain) LUT 구조에서 입력신호의 크기를 구할 때, 기존의 테이블을 이용하여 제곱근 연산을 하는 방식보다 좋은 성능을 내면서 근사를 위한 테이블의 메모리를 필요로 하지 않는다. 또한 간단한 쉬프트 연산 등을 이용하므로 DSP 또는 MCU 기반의 DPD를 구현할 때 간단하게 구현 될 수 있다는 장점을 갖는다. 컴퓨터 모의실험을 통해 제안하는 제곱근 근사방식을 이용한 DPD와 기존의 방식을 사용한 DPD를 비교함으로써 제안하는 방식이 기존 방식보다 좋은 성능을 내면서도 보다 효율적으로 구현될 수 있음을 검증하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1369-1373
• /
• 2003

A linear power amplifier is particularly emphasized on the CDMA system using a linear modulation scheme, because IMD which cause adjacent channel interference and co channel interference is mostly generated in a nonlinear power amplifier. In this paper, a new type of linearization technique proposed. It is presented that balanced MESFET Predistortion linearizer added. Experimental result are present for Korea PCS frequency band. The implemented linearizer is applied to a 30㏈m class A power amplifier for simulation performance. Two-tone signals at 1850 MHz and 1851.23 MHz are injected into the main power amplifier. The main power amplifier with a 12.1㏈ gain and a P1㏈ of 30 ㏈m(two-tone) was utilized. The reduction of IMD is around 22㏈.