• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.3
• /
• pp.15-26
• /
• 2012

Recently, due to applicability increase of vector data based digital map for geographic information and evolution of geographic measurement techniques, large volumed GIS(geographic information service) services having high resolution and large volumed data are flowing actively. This paper proposed an efficient vector map compression technique using the SEC(spatial energy compaction) based on classified bins for the vector map having 1cm detail and hugh range. We encoded polygon and polyline that are the main objects to express geographic information in the vector map. First, we classified 3 types of bins and allocated the number of bits for each bin using adjacencies among the objects. and then about each classified bin, energy compaction and or pre-defined VLC(variable length coding) were performed according to characteristics of classified bins. Finally, for same target map, while a vector simplification algorithm had about 13%, compression ratio in 1m resolution we confirmed our method having more than 80% encoding efficiencies about original vector map in the 1cm resolution. Also it has not only higher compression ratio but also faster computing speed than present SEC based compression algorithm through experimental results. Moreover, our algorithm presented much more high performances about accuracy and computing power than vector approximation algorithm on same data volume sizes.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.4
• /
• pp.349-360
• /
• 2017

In concrete construction work, formwork is an important process that accounts for 10% of the total construction cost. Recent buildings are becoming bigger and higher. In order to maximize the efficiency and safety of this formwork, the system of formworking has been systematized. However, the human accidents and the noise complaints arise from dismantling processes frequently occur. In order to solve these problems, most of them are dependent on foreign technology, but they do not take into consideration the conditions of domestic construction site. In this study, we developed a table type multi-drop system form for a slab and beam which can improve the process, safety and reduction of disassembly noise, and evaluated the physical properties of the main members which are used in the system. The results of this study show that there is sufficient strength to be used as a slab and a laying material for both a yoke beam and a supporting post. The noise level is improved compared to existing method.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.193-193
• /
• 2011

현재까지 대부분의 지열원 열펌프 시스템에 관한 연구는 열펌프 유닛과 지중열교환기에 대해 개별적으로 수행되었으며, 열펌프 유닛과 지중열교환기 설계 및 최적화의 공통변수인 지중순환수 유량에 따른 시스템 전체에 대한 연구성과는 매우 미미한 실정이다. 본 연구에서는 현재 국내에서 인증되어 보급되고 있는 물매물 지열원 열펌프 유닛의 성능 자료를 분석하고, 지중순환수 유량 변화에 따른 물대물 열펌프 유닛의 성능 실험 및 지중열교환기 형상에 관한 설계 및 분석을 수행하여 지열원 열펌프 시스템 최적화에 관한 기반 기술 확보하고자 하였다. 현재 국내의 물대물 지열원 열펌프 유닛의 냉방 및 난방 조건에서의 최소 인증 COP는 각각 4.1과 3.45이다. 다양한 용량 및 성능을 갖는 국내 인증 물대물 지열원 열펌프 유닛에 대한 정량적 성능 분석을 위하여 3.5kW(1RT) 용량당의 지중순환수 유량과 COP를 고찰하였다. 냉방운전시 3.5kW 단위 용량당 열펌프 유닛의 지중순환수 유량은 10.73에서 18.52LPM을 나타냈으며, 난방운전에는 10.41에서 18.16LPM을 나타냈다. 이때, 냉방 COP는 4.1에서 5.4의 값을 나타냈으며, 난방 COP는 각각 3.5에서 4.2를 나타냈다. 인증 열펌프 유닛에서 지중순환수 유량과 열펌프 유닛의 냉난방 성능은 일정한 경향성을 나타내지 않았다. 지중순환수 유량에 따른 지열원 열펌프 유닛과 시스템의 성능을 정량적으로 분석하고자 지중순환수 유량 변화에 따른 물대물 지열원 열펌프 유닛 성능 실험을 수행하고 이를 기반으로 지중열교환기를 설계 및 분석하였다. 냉난방 각 운전모드에서 ISO 13256-2 규격과 NRGT 101 규격을 기준으로 지중순환수와 부하측 유량 6LPM 에서 36LPM 사이에서 변화시키며 성능 실험을 수행하였다. 냉방 및 난방모드 모두 유량이 증가함에 따라 열펌프 유닛 COP가 증가하였으나, 유량 증가에 따른 열펌프 유닛 COP 증가율은 감소하였다. 지중순환수 유량이 18LPM 이상에서는 COP 상승폭은 미소하였다. 기존문헌의 부하 산정자료와 열펌프 유닛 실험 성능 데이터를 이용하여 지식경제부 고시 2009-332호에 준하여 수직밀폐형 지중열교환기를 설계하고 순환펌프 소요동력을 이용하여 시스템 COP를 분석하였다. 지중열교환기 설계 시 국내에서 가장 많이 사용되고 있는 상용지중열교환기 설계프로그램인 GLD 프로그램을 사용하였다. 지중순환수와 부하측 2차 유체 유량 증가 시에 열펌프 유닛 COP 증가율 대비 시스템 COP 증가율은 감소하였으며, 난방모드에서는 일정 유량 이상에서는 열펌프 유닛 COP는 증가하였으나, 시스템 COP는 감소하였다. 또한, 지중순환수 유량 증가에 따라 지중열교환기 길이가 증가하였으며, 냉난방시의 지중열교환기 길이차이가 증가하였다. 지열원 열펌프 시스템의 고효율화 및 시공비 절감을 통한 경제성 확보를 위해서는 지열원 열펌프 유닛 성능과 지중열교환기 형상 공통 변수인 지중순환수 유량을 함께 고려하여 시스템을 설계하여야한다.

• Proceedings of the Korean Society of Grassland Science Conference
• /
• 2002.09b
• /
• pp.159-183
• /
• 2002

China is the country with more people and more land, faced with the pressure of population growth and land decrement. The potential of developing animal husbandry by increasing feed grain per capita is less and less. "Planting forage to feed livestock" is a sustainable industry with grain-saying, high efficiency, good quality and safety, accorded with the conditions of China. First, the natural, social and economical condition in southern area of China was analyzed, and the characteristics of production and utilization of forage were introduced in this paper. The natural condition in southern area of China was well suited for forage production. Forage was mainly planted on famland. Main herbage cultivars were annual or hibernal annual. Most of forage was directly utilized by herbivorous animal and fish. Second, The present situation, developmental trend and existing problems of forage industrialization were reviewed. The level of forage industrialization was low with a bright future. At present, the chief existing problems were lack of herbage cultivars of good quality, backward equipment, lagged techniques and low level of mechanization in forage processing with a short time and so on. Finally, the situation of production and utilization of forage was summarized.

• Microbiology and Biotechnology Letters
• /
• v.16 no.3
• /
• pp.250-258
• /
• 1988

Lipases are well known as the enzymes which catalyze the hydrolysis of ester bonds combining aliphatic chains and glycerol on mono-, di- and triglycerides. Their reactions are characterized by be-ing heterogeneous and catalyzing the water-insoluble substrates. This property has been one of the Hurdles which delayed the application of lipases in fats and oils industry, However, with the development of biological reaction system of which organic solvent is introduced in part or whole as the reaction media, enzymatic manipulation of fats and oils is attracting increasing attention from the academic and industrial sectors. Trials in two-phase system and reversed micellar system to produce fatty acids through enzymatic hydrolysis of triglycerides preyed to be efficient in respect to volumetric productivity, fat hydrolysis rate, product separation, etc. In organic solvent system lipases have been found to have the ability to catalyze aminolysis, transesterification, esterification, thiotransesterification and oximolysis that are virtually impossible to catalyze in water. The organic solvent system is being extensively used in interesterifying glycerides to produce a fat with the modified physical and chemical nature.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1982-1990
• /
• 2010

Excepting tunnel of dorimstream - ccachimountain station section, the subway line No.2th section was build using ASSM and NATM methods because of soil pressure and land condition. The way of dealing underground water was selected without sufficient preconsideration of geographical features, ground condition, influence of lowing underground water, and long-term cost of running maintenance so that the form of undrained tunnel was build having decreased construction characteristics and technically improper elements. The form of partial drainage is very difficult to manage structures of tunnel, because water leakage, water pressure causing cracks of lining concretes and scaling are constantly happened. so partial drainage suggest that setting reinforced Anchor Bolt to prevent buoyancy and should increase center drainage way up to height of railroad. Partial drainage suggest that holey pipe(${\phi}$350mm) manhole, drainage checking pipe manhole are should be regularly dredged, when changing roadbed(gravel${\rightarrow}$concrete) drainage checking pipe manhole should be build and setting a limitation of entering underground water's quantities. Beside drainage degree in changed section of structures causing instability of structures is continuous degree. so if efficient drainage way and the patterns of flaws, problems are considered in survey, it will be expected to have a advantage condition in maintenance part.

• Journal of Korea Port Economic Association
• /
• v.32 no.4
• /
• pp.109-126
• /
• 2016

This study investigates the initiatives of Gangwon sea routes based on precedent studies on the North Pole route to suggest a multi-modal buildup of transport logistics network of Gangwon harbors for the strengthening of logistics efficiency in the Korean Peninsula. The findings were: First, the government should expand railway infrastructure in Gangwon. Second, harbors in Gangwon should each have one speciality to strengthen connection with other harbors by using railway oriented background transportation network. Third, the government should develop industries of EFEZ(East coast Free Economic Zone) in the East Sea Coast in Gangwon to connect resources from the North Pole Sea. Fourth, the government should invite the base of Araon Ho's polar research vessel to play the role of the North Pole Sea route in the near future. Fifth, the government should strengthen the role of the Samcheock LNG base under construction. SIxth, environment-friendly transportation technology should be introduced to reduce carbon emission as much as possible. Lastly, an optimum North Pole logistics route should be developed to connect the Metropolitan area(Metropolitan Economic Zone), Gangwon roads and railway, Gangwon habor, Trans-Siberian Railway and thw North Pole route, and Europe, to strengthen national foreign trade power in the near future.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.256-261
• /
• 2008

The curtain-wall work has been more frequently applied in the construction industry since demand of high-rise buildings has been increased. The curtain-wall work is usually performed with the frame work simultaneously for reducing construction period, but it might be delayed because of several problems caused by interference of process. However, there is not an appropriate tool which can be used by a work manager for adjusting quantity of the construction equipments or the workers when the curtain-wall work was delayed. To resolve this problem a construction simulation anticipating and analyzing potential problems before starting the work can be applied in the curtain wall work. This research suggests a general model for the curtain-wall work by using construction simulation and produces a combination of construction equipments and workers which can estimate optimum work productivity.

• The Journal of the Korea Contents Association
• /
• v.21 no.9
• /
• pp.806-816
• /
• 2021

This study aims to describe the reporting patterns of articles on the Emergency Grant for all citizens(EGAC) and compare the reporting attitudes by newspaper companies. The main results are as follows: First, conservative newspapers reported more than four times as much coverage of EGAC as liberal newspapers. Newspaper articles reported during the week of the National Assembly Election Day accounted for about a quarter of the total, and 79.1% of the articles were reported in the political realm of newspapers, and only 2.8% in the social realm. Second, a conservative newspaper reported a critical attitude toward EGAC at 52.6% and favorable articles at 5.3%. On the other hand, in a liberal newspaper, critical articles were 17.1% and favorable articles were 37.1%. The inefficiency of selectivism was reported as the basis for the argument in favor, and concerns about the burden of deterioration in the financial soundness of the opponents were reported the most. Politicians are the most cited sources of information in articles. Finally, in prior to policymaking, the proportion of the media in favor of and against the news was similar, and the proportion of articles with a neutral attitude accounted for more than half. And in the specific method discussion stage, the articles in favor of the article exceeded the proportion of articles on the opposite side.

• The Journal of the Korea Contents Association
• /
• v.21 no.2
• /
• pp.386-394
• /
• 2021

This study aims to investigate the class satisfaction of the students enrolled in between a primary and secondary teacher's college, and to identify any statistical differences among the class satisfaction factors. In order to answer these questions, a survey of 50 questionnaires were distributed to 54 primary teachers' college students and 50 secondary teacher's college ones, respectively. A survey consisted of 5 categories including class contents, instruction results, class environment, instructional supports and efficiency. To analyze data, the descriptive analysis and independent sample t-test were administerd using Jamovi statistical program. The results revealed that there was no significant difference between two groups in terms of the overall class satisfaction, even though the mean score from the secondary teachers' college students was higher than that of the primary teachers' college students. However, there was a significant difference in the class satisfaction's sub categories: class environment, instructional supports and efficiency.