• 조명전기설비학회논문지
• /
• 제25권4호
• /
• pp.111-116
• /
• 2011

This paper deals with the electromagnetic clutch which stop the generator at emergency by using the engine power of generator. The electromagnetic field was analyzed using Flux-2d program with different conditions : voltage, air gap, coil locations. As a result, the maximum magnetic flux density of electromagnetic clutch occurred between the coil and wheel : 0.27[T], 0.41[T] at 12[V], 24[V]. The maximum flux density was at the center location of the coil.

• 동력기계공학회지
• /
• 제6권2호
• /
• pp.73-81
• /
• 2002

In this study, electronically controlled automatic transmission adopted on a subcompact model in the market was modelled, and the driving performances of the transmission were simulated with the models. Kinetic and dynamic models of working components are established. The driving simulation program is developed with those models, and the various driving conditions are analyzed. With the results, the dynamic behaviour of the engine and the automatic transmission is easily understood. Especially, the transient performances of torque converter and clutches are deeply analyzed. Skipping the vehicle road test by using this analyzing tool, we can expect the cost down and the reduction of the development period of automatic transmission.

• 한국산업융합학회 논문집
• /
• 제21권5호
• /
• pp.241-246
• /
• 2018

The engine cooling system is a device that keeps the temperature of the engine room at a proper level by driving the cooling fan when the engine room temperature that occurs during driving is above a certain temperature. Recently, the vehicle cooling system has been changed to electronic system. Therefore, in this paper, we will analyze the clutch operation characteristics for designing a superior electronic fan clutch. For this purpose, an electronic fan clutch was designed and a test bed for performance evaluation was constructed and analyzed.

• 한국전자통신학회논문지
• /
• 제9권1호
• /
• pp.83-90
• /
• 2014

본 논문에서는 BLDC 모터로 구동되는 오일 펌프 제어 시스템을 설계하고 구현하는 문제를 다룬다. 제안된 오일 펌프는 하이브리드 차량에 장착되어 엔진 클러치와 변속기에 충분한 양의 작동유를 공급하는 역할을 한다. BLCD 모터로 구동되는 제어기를 단순화하여 전원 전압을 PWM 방식으로 직접 제어하는 일반적인 방법을 사용함으로써 응답성 및 정확성을 향상시키는 것을 주목적으로 한다. 제안된 제어 기법은 오일 펌프 장치의 효율성과 신뢰성을 높인다. BLCD 모터의 회전과 오일 펌프 가동 실험을 실시하여 제안된 기법의 성능을 검증한다.

• 전력전자학회논문지
• /
• 제7권5호
• /
• pp.453-464
• /
• 2002

ER 유체(Electrorheological fluid)는 인가 전계에 따라 유체의 점도(Viscosity)와 댐핑력(Damping force)이 변화하는 혼합물질이며 반능동 현가장치, 고속 클러치, 진동 흡수장치 등에 적용되고 있다. ER 유체의 응용을 위해서는 강한 전계를 인가해 줄 수 있는 고전압 가변 전원장치가 필요하다. 본 논문에서는 반능동 현가장치에 적용하기 위한 전원장치의 개발에 대하여 기술하였다. ER 유체의 전기적 특성, 고전압 전원장치의 요구조건, 전원장치의 설계 및 제작에 대하여 설명하였으며 최종적으로 실험을 통하여 개발된 고전압 전원장치가 ER 유체 응용에 적합함을 검증하였다.

• 한국산학기술학회논문지
• /
• 제14권11호
• /
• pp.5392-5395
• /
• 2013

환자 및 노약자 이동에 중요한 역할을 하고 있는 수 전동휠체어의 핵심부인 구동부를 새롭게 설계했다. 구동부는 고속모터와 다단기어 치형을 설계적용하고, 굽힘강도와 면압강도를 고려해 큰 추진력을 얻을 수 있도록 성능을 검증하였다. B-Type의 마찰판식 클러치 전자식 브레이크(다판 방식의 무여자 작동형)를 동 축상에 설치해, 큰 토크에도 급격한 제동이 가능하도록 했다. 본 연구에 설계된 다단치차 감속기를 수 전동휠체어 구동장치에 사용하므로서, 소형화, 경량화를 이루고 구동 효율이 기존제품보다 30% 향상된 구동부를 구성할 수 있었으며, 보수 및 관리의 용이성을 함께 추구했다.

• 대한의용생체공학회:의공학회지
• /
• 제22권4호
• /
• pp.359-368
• /
• 2001

A new knee-ankle-foot-orthosis(KAFO) which uses an automatically-controlled electromechanical wrap spring clutch for the knee joint was developed in the present study. It was found that the output voltage from the foot switches of the developed KAFO was proportionally increased with respect to the applied load. The output voltage from the infrared sensor also decreased as the knee flexion angle increased. The knee joint system for the new KAFO weighs only 780g lighter than any other commercially available developed system. In addition, the solenoid reduces the reaction time for the automatic control of the knee joint. The static torque of the clutch was measured for three persons, and it satisfied the normal knee extension moment during the pre-swing. Three-dimensional gait analyses for three different gait patterns (normal gait, locked-knee gait, controlled-knee gait) from five normal subjects were conducted. Controlled-knee gait showed the maximum knee flexion angle of 40.56$\pm9.55^{\circ}$ and the maximum knee flexion moment of 0.20$\pm$0.07Nm/kg at similar periods in the normal gait. Our KAFO system satisfies both stability during stance phase and free knee flexion during the swing phase at the proper period during the gait cycle. Therefore, our KAFO system would be very useful in various low extremity orthotic applications.

• 한국정밀공학회지
• /
• 제29권7호
• /
• pp.770-777
• /
• 2012

This paper deals with the design and modal characteristics analysis of a drive-train for a paralleltype hybrid electric vehicle (HEV). The function of the drive-train system (DTS) in the HEV combines or divides the torque and velocity from the internal combustion engine along with the induction motor. The system consists of a compound planetary gear and unit's electromagnetic clutch to provide the operation modes such as Engine Only (EO), Electric Vehicle (EV), and Hybrid Electric Vehicle (HEV) modes. In order to investigate the characteristics of the velocity and torque flow for the system, dynamic models of the HEV with DTS are derived from the prototype DTS. The performance of the derived dynamic models is evaluated by both computer simulations and experiments according to each mode.

• 전력전자학회논문지
• /
• 제17권2호
• /
• pp.166-173
• /
• 2012

Plug-in Hybrid Electric Vehicle is driven by the engine, the primary traction motor, and the secondary auxiliary motor generating the electric power for battery charging. Secondary auxiliary motor should be connected to the engine or separated from the engine by the clutch system. This paper presents the position controller of the BLDC motor for the clutch system of Plug-in Hybrid Electric Vehicle. The BLDC motor can be applied to the clutch system in spite of it's low accuracy of the position control due to high gear ratio between the clutch and the motor. Since the attachment and the detachment between the motor and the engine should be carried out within 0.3 seconds, the position controller with fast acceleration and deceleration is implemented. For the torque control with braking operation for the BLDC motor, the modified bipolar PWM method with low current ripple compared to the conventional unipolar PWM is presented. The position control performance of the BLDC motor for the clutch system is verified through the simulation and experiments.