• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.7
• /
• pp.1282-1290
• /
• 2000

The LHCP circularly polarized antenna operating at the satellite broadcast receiving band is developed by employing the sequential-rotation technique in which each truncated-corner patch square element is arranged in the triangular lattice type. Antenna designed with sequentially rotated technique of triangular lattice type has the effect of improved axial-ratio bandwidth, cross-polarization etc., and the degradation of radiation pattern can be reduced significantly by minimizing the radiation loss of feeding line structure. Characteristics of antenna designed is satisfied with specifications of array antenna for DBS that is -27 dB of side lobe level and -20 dB of cross-polarized level at $\Phi$=45$^{\circ}$ plane.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.10
• /
• pp.1091-1096
• /
• 2009

Some closed-form expressions for circuit parameters are derived based on the equivalent circuits for the resonant MTM-TL(open and short). The lumped series resistance and shunt conductance, which explain radiation effects of a unit cell may be found by |$S_{11}$|(simulated or measured) with open and short terminations, respectively. The EM-simulated results, circuit-simulated results(obtained using extracted circuit parameters) and measurement results are shown to be in good agreement.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.11
• /
• pp.1211-1216
• /
• 2007

Yagi-Uda UHF RFID(Radio Frequency Identification) tag antennas with long reading range have been designed. According to ISO-18000, EIRP(Effective Isotropic Radiation Power) of reader and reader antenna is limited as 36 dBm. Therefore, the gain of a tag antenna should be high enough to extend the reading range. Yagi-Uda antenna has been applied to a UHF RFID tag antenna, and high gain and long reading range have been achieved. Three different of Yagi-Uda UHF antennas have been optimized to achieve the small size with low back-lobe patterns. The sizes, reading ranges and return loss of Yagi-Uda tag antennas are compared and measured.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.12
• /
• pp.1212-1218
• /
• 2014

This paper proposes a planar bow-tie UWB antenna by modifying the ground patch of a reference bowtie-monopole antenna satisfying low band of UWB. The proposed antenna was implemented with five-angled ground patch to be operated in whole UWB band, while the reference antenna had a ground patch of half circle type. The measured return loss satisfies less than -10 dB in 3.1~10.6 GHz, except 4.9~5.8 GHz rejection band. The measured radiation pattern is almost the same with that of the monopole antenna. The radiation gain reduction is about 8 dB at rejection band.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.90-95
• /
• 2004

This paper simulated partial discharge caused by 22.9[kV] power cable using XLPE(Peroxide Crosslinkable Polyethylene) insulation having the outside damage. As one of the insulation diagnostic method a radiated electromagnetic waves were measured by an UHF method using a BiconiLog antenna(EMCO-3142) and a spectrum analyzer used to measure EMI, EMC. From results of this study, It was confirmed that discharge Ogress were possible to be estimated by the proposed method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.4
• /
• pp.381-386
• /
• 2014

In this paper, the effect of slot antenna's location in the radiation performance and impedance bandwidth was analyzed. The proposed antenna was designed to operate at Wi-Fi band(2.4~2.5 GHz) when the slot antenna is located at the center of the ground plane, the proposed antenna has a bandwidth of 340 MHz(2.24~2.58 GHz) under voltage standing wave ratio of = 2 and achieves average realized efficiency of 69 % over Wi-Fi bands.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.3 s.94
• /
• pp.270-276
• /
• 2005

This paper presents an analytical analysis about neighboring UWB interferences in a S-DMB receiver. We first derive the C/N$_{o}$ of a S-DMB receiver, based on its specifications and present the theoretical description of its effect to UWB interferences in terms of C/(N$_{o}$+ I) and I/N$_{o}$. Using the calculated C/(N$_{o}$+ I) and I/N$_{o}$, we derive the separation distance for a S-DMB receiver not to be interfered by UWB interferences. Finally, we propose an UWB emission limit at minimum separation distance under which a S-DMB is free of UWB interferences and compare it with the value appeared in FCC proposal.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.2
• /
• pp.139-146
• /
• 1996

In this paper, the total electric field antenna in the small loop and aperture plane structure to load a capacitance on transformed QMSA(Quarter-wavelength Microstrip Antenna) from MSA(Microstrip Antenna) is proposed, and the total electric field is shown that the calculated value is agreed resonably with experimental value. Itis a smalled antenna of the radiation element and ground plane with equal width. The designed and manufactured antenna can receive borth vertically and horizontally polarised waves to operating frequency of 1.5GHz; therefore this is available as a smalled antenna for wireless telephones and will be quit useful for indoor communication. Also, antenna's equivalent circuit with transmission line model is designed to find more accurate resonant frequency and is calculated return loss value. The calculated value is agreed resonably with experimental value.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.1
• /
• pp.32-43
• /
• 1999

In this paper, the transformed QMSA to load a capacitor without limitation of the electric force on QMSA(Quarter-wavelength Microstrip Antenna) is designed. Bandwidth of the designed and manufactured antenna is 5.7% at the resonant frequency of 2.0 GHz and the resonant frequency and bandwidth versus change of any arbitrary feed point is observed. Since the size of wide slot width between the left and right parallel plate to load a capacitor is very wide bandwidth, will be suitable for very wide bandwidth communication. The radiation pattern characteristics of the designed antenna based on the dipole structure and the aperture structure analysis method. As calculation results, relative backward radation is - 5 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.827-836
• /
• 2001

The L-shaped strip is shown to be an attractive feed for the thick microstrip antenna (thickness around 10% of the operating wavelength). The L-strip incorporated with the radiating patch introduces a capacitance suppressing some of the inductance introduced by the strip itself. In this paper, a wideband microstrip patch antenna fed by L-strip for the PCS (1,750~1,850 MHz) and IMT-2000 (1,920~2,170 MHz) broad-band is presented. A two-element array fed by L-strip is also proposed. Both the antennas have stable radiation patterns across the passband. The impedance bandwidth is over 31% (VSWR < 1.5, 615 MHz) of the center frequency. Moreover, both the antennas have about 7 dBi average gain.