• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.4
• /
• pp.42-47
• /
• 1999

Based on characteristics of resonator in BPF, a resonant characteristic is obtained by using variation of characteristic impedance in rectangular waveguide. And we have designed and made a novel waveguide BPF with this phenomenon. This filter can be made with arbitrary lengths of rectangular waveguide resonators.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.4 s.304
• /
• pp.143-152
• /
• 2005

Optimal methods for designing multiplierless IIR filters with cascaded prefilter-equalizer structures are proposed for narrowband applications. Assuming that an U filter consists of a cyclotomic Polynomial (CP) prefilter and an all-Pole equalizer based on interpolated first order polynomial (IFOP), in the proposed method the prefilter and equalizer are simultaneously designed using mixed integer linear programming (MILP). The resulting filter is a cascaded filter with minimal complexity. In addition, MtP tries to minimize both computational complexity and phase response non-linearity. Design examples demonstrate that the proposed methods produce a more efficient cascaded prefilter-equalizer than existing methods.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.3
• /
• pp.18-24
• /
• 2003

The resonator using two layer microstrip structure was proposed and the bandpass filter was designed using this resonator in this paper. The proposed resonator structure is constructed by placing a U-shape of resonator in the first layer and then placing a broadside coupling strip in the second layer just above of the U-shape of resonator's edge part. Because these structure has various design parameters than general single layer coupled line structure, filter design is more flexible. In this paper, the narrow band filter was designed using multi-layer structure that had been applied to broadband filter because it's high coupling nature. The filter was designed to have 4MHz center frequency and 3 % fractional bandwidth, and finally confirmed that can be realizable narrow band filter by using multi-layer structure through fabrication and measurement.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.103-109
• /
• 2008

In this papaer, a new type of ${\lambda}_g/4$ short stub band pass filter and ${\lambda}_g/2$ open stub band pass filter are purposed. Both are designed using FSCS technique for harmonic suppression. The proposed filters that used FSCS technique and a broadband stop filter is integrated to band pass filter to suppress the harmonics. The BSF are also placed between stubs so that the size is larger than prevent as compared to conventional one. The propose filters have center frequency of 5.8 GHz, bandwidth of 50% and harmonics suppressin is 120% has in bandwith. The measurement results in the case of ${\lambda}_g/4$ short stub filter, insertion loss of 0.5 dB, return loss of 14 dB are achieved and in the case of ${\lambda}_g/2$ open stub filter, loss of 0.8 dB, return loss of 14.4 dB are achieved. The simulation results and the measurement results are almost the same.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.6
• /
• pp.63-70
• /
• 1985

In this paper, the Unilateral Fin-line structure and the I-Plane structure are analysed by Rayleigh-Ritz variational method including the effect of conductor thickness. And a com-putcr-aided design program, CADUNI, is developed for microwave I-plane and Unilateral Fin-Line bandpass filters. Unilateral Fin-Line Filters are desigied at the center frequency of 10.5 GHz with guided bandwidth between 5% and 24.6%. Measured insertion loss is between 0.17 and 0.25 dB, and center frequency deviation is less than 0.2%. Experimental results are in good agree-ment with theory.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.273-276
• /
• 2003

본 논문에서는 한쪽이 단락된 스트립선로(Stripline)와 Loading 캐패시턴스(Capacitance)로 구성된 새로운 형태의 1/4파장 스트립선로 공진기를 제안하였으며, 이 공진기를 이용해서 5.2 GHz 대역 무선 LAN용 적층 대역통과 여파기를 설계, 제작 하였다. 제안한 공진기의 전파지연효과(Slow-wave Effect) 때문에, 기존의 공진기에 비해서 길이가 축소되며, 기준 공진주파수(Fundamental Resonant Frequency)에 대한, 첫 번째 기생공진주파수(First Spurious Resonant Frequency) 값이 커지기 때문에, 넓은 상향저지대역(Wide Upper Stopband)을 갖는 초소형의 대역통과 여파기의 설계가 가능하다. 설계한 여파기를 LTCC 적층 공정 기술을 이용하여 제작하였으며 그 크기는 $3.2mm{\times}1.6mm{\times}0.8mm$ 이다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.3
• /
• pp.10-17
• /
• 2003

In this paper, genetic algorithm (GA)-based Thin Film Bulk Acoustic Resonator (FBAR) RF filter design technique is proposed. Since the BVD(Butterworth-Van Dyke) lumped element model is valid only around the resonance, FBAR filter design technique based on BVD circuit has an approximate error. Instead of using BVD model, optimizing filter design method utilizes an analytical electrical impedance equation of FBAR. The geometry of FBAR such as thickness of the piezoelectric layer and area which significantly affect the filter response is optimized by GA. US-PCS Rx Bandpass filter obtained by the proposed technique shows a better response comparing with the typical and BVD-based filter.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.5
• /
• pp.69-74
• /
• 2010

In this paper, we proposed a compact arbitrary dual-band band-stop filter using CRLH transmission line. The proposed filter used CRLH transmission line as stub and it developed dual-band band-stop characteristics using non-linear phase response of CRLH transmission line. The size of proposed filter is compact. And it can control arbitrary dual stop band. In this paper, designed band-stop filter at GPS band and ISM band As result, the S(2,1) is about -30dB at GPS band and about -29dB at ISM band. The fabricated filter is very compact. Its dimension is 10mm*15mm.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.5
• /
• pp.162-167
• /
• 2009

In this paper, we present a compact Ultra-Wideband band-pass filter using a high-pass filter and low-pass filter. The structure of our proposed band-pass filter is very simple and the DGS(Defected Ground Structure) structure is used to get the low-pass filter characteristic. Our proposed band-pass filter can be much smaller than a cascaded filter. As a result of measurement the insertion loss is less than 0.5dB throughout the pass-band of $2.1GHz{\sim}10.56GHz$, the return loss is more than 20dB and the group delay maximum variation is 0.23ns from 0.12ns to 0.35ns.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.10
• /
• pp.73-81
• /
• 2000

This paper presents the design and simulation of a power and area efficient interpolation FIR filter with partitioned look up table (LUT) structure. Using the symmetry of the filters coefficients and the contents of the LUT, the area of the proposed filter is minimized. The two filters share the partitioned LUT and activate the LUT selectively to realize the low power operation. The proposed filter has been designed in a 5.0 Volts 0.6${\mu}m$ CMOS technology. Power consumption results have been obtained from Powermill simulations. Experimental results suggest that the proposed filter reduces both the power consumption by 28% and simultaneously the gate area by 5% simultaneously compared to the previously proposed filters.