• Journal of Sericultural and Entomological Science
• /
• v.15 no.2
• /
• pp.9-14
• /
• 1973

In order to find out effects of the generative power of silk worm moth which have been brought up in the high temperature accommodation at their pupa stage. For this specific study, 9 different kinds of male silk worms have been selected as specimen. All those specimen were brought up in the normal temperature at their larvae stage and after the pupation period they have been accommodated in the condition of high temperature for a certain length in accordance with the study programme. Afterwards, those mlae specimen were copulated with Suwon jam 103${\times}$104 which were all brought up in normal conditions. This study was carried out to find the copulation function as well as the ratio of unfertilized eggs(male sterility test). Results of study have been revealed as follows: 1) Although some differences were observed, male pura which have been brought up in the condition of high temperature shown the low rate of unfertilized eggs rather than those were brought up in the normal conpition. 2) In this group the eclosion(emergency) has been found to be poor rather, than those specimen brought up in normal conditions. 3) The copulation function of Moran, Daedong, J124 and C108 specimen were found to be poor than those of Suwon jam. 4) Fertility rate of Moran, Daedong, J124 and C108 was found to be around 65%. This figure is rather lower than what we normally expect. 5) Unfertilized egg ratio of Moran, Daedong and C108 were found to be around 20% if they were brought up in the condition of high temperature for one day from the time of pupation: 40% at 2 days, and 70% at 3 days duration. More than 3 days treatment has shown no progress in the unfertilized egg ratio. 6) One day's treatment for the pupa at the later stage has shown the unfertilized egg ratio of about 10%; 20% at 2 day's treatment, 35% at 3 day's treatment, 40-60% at 4 day's treatment, more than 60% at 5 day's treatment, and the 70% of fertilized egg ratio was only observed when the treatment days come to 7 days. It was understood that the unfertilized egg ratio was high at the antepupa stage rather than that of post-pupa stage. 7) According to the result of observation the sperm in copulatory pouch and seminal receptacle out of the normal female silk worm which have been copulated with the male brought up in the condition of high temperature at their moth stage. The reproduction system found in the control zone has been found to be normal and the sperm is amountful and active in motion while the sperm found in the treatment to be limited in amount and slow in motion. The observation was made within 5 hours from the copulation. 8) According to the result of observation of sperm of seminal receptacles of the female silkworm moth, and according to that observation of sperm in the seminal receptacle in female silkworm moth, the amount of sperm and mobility in the female moth brought up in high temperature were poor comparing that were brought up in normal temperature zone. Some of them are even found to be no trace of such. 9) Appearance and mosle of the copulatory organ of the male silkworm moth was found to be no anatomical change. 10) Testis of the later pupa stage which was brought up in the high temperature was found to be almost net developed to anucleate sperm and they are degenerated at stage of between maturation division and sperm abnormal stage. Mean time at control zone, the formation of anucleate sperm was already observed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.204-211
• /
• 2020

The high-velocity oxy-fuel (HVOF) thermal spraying coating technique has been considered a promising replacement for traditional electrolytic hard chrome plating (EHC), which caused environmental pollution and lung cancer due to toxic Cr⁶⁺. In this paper, two types of cermet coatings were prepared by HVOF spraying: WC-CoCr and WC-CrC-Ni coatings. The produced coatings were analyzed extensively in terms of the micro-hardness, porosity, crystalline phase and microstructure using a hardness tester, optical microscopy, X-ray diffraction, and scanning electron microscopy (including energy dispersed spectroscopy (EDS)), respectively. The wear and friction behaviors of the coatings were evaluated comparatively by reciprocating sliding wear tests at 25 ℃, 250 ℃, and 450 ℃. The results revealed correlations among the microstructures, metallic binder matrixes, porosities, and wear performance of the coatings. For example, WC-CoCr coatings showed better sliding wear resistance than WC-CrC-Ni coatings, regardless of the test temperature due to the more homogeneous microstructure, Co-rich, Cr-rich metallic binder matrix, and lower porosity.

• Applied Microscopy
• /
• v.39 no.2
• /
• pp.141-147
• /
• 2009

The antennae of millipedes have a prominent function in detecting various types of environmental stimuli, and structural modification of the antennae is closely associated with the degree of sense recognition. Although the biological significance of the antennal sensillae to millipedes are widely understood, the structure and function of the antennal sensillae are still not clear and more precise analysis is required. We have analysed the ultrastructural characteristics of the antennal sensillae in a millipede Anaulaciulus koreanus koreanus using field emission scanning electron microscopy (FESEM). According to their morphological and substructural features, we could identify three different types of antennal sensillae as follows: trichoid sensilla (TS), chaetiform sensilla (CS) and basiconic sensilla (BS). The TS on the articles are long, blunt-tipped, almost straight hairs with deep longitudinal grooves in their lower parts whereas, the CS are long, sickleshaped bristles with longitudinal grooves acuminating toward the tip. The BS can be subdivided further into three subtypes which are the large-sized basiconic sensilla ($BS_1$), the small-sized basiconic sensillae ($BS_2$) and the spiniform basiconic sensillae ($BS_3$). The BS between the terminal segment and distal margins of the other segments are clearly discriminated in this species.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1991.04a
• /
• pp.17-22
• /
• 1991

최근 기계장치로부터 발생하는 소음을 감소시키는 새로운 방법으로서, 능동 적으로 소음을 제어하는 방법에 대한 연구가 활발히 진행되고 있다. 이것은 원하지 않는 소음을 그 신호의 역위상을 갖는 부가음을 이용하여 능동적으 로 감쇠시키는 방법으로서, 저주파수 대역에서 비효율적인 수동적인 방법인 소음기둥에 대한 대안으로 많은 학자들의 관심의 대상이 되어 왔다. 초기에 는 소음을 줄이기 위해 요구되는 여러가지 음향요소의 전달함수를 제어하는 데 대한 불가능성으로 인해 능동 소음제어에 대한 실질적인 발전이 지연되 어 왔으나 최근 마이크로 컴퓨터를 비롯한 전자공학의 발전으로 인해 적응 신호처리 분야가 등장하게 되었으며, 음향계의 소음을 원하는 수준까지 제어 하는 능동 소음제어의 실시간 구현이 가능하게 되었다. 그 중에서도 음이 1 차원적으로 전파한다고 볼 수 있는 길이가 긴 덕트구조물에서의 능동 소음 제어는 가장 기본적이며 현실적으로 자동차 배기계나 냉동.공조설비에 있어 서 실용적으로 적용할 수 있는 문제임 만큼 많은 연구가 이루어지고 있다. 이러한 능동 소음제어 방법을 음향계에 적용하였을 때, 부가적인 음을 발생 하는 제어용 스피커로 인해 입력마이크로폰으로의 음향궤환이 존재하고 이 에 따라 제어계가 불안정해질 수 있으며, 또한 변환기의 사용으로 인한 부가 적인 전달함수가 존재하므로 이에 대한 중요한 의미를 갖고 고려하여야 한 다. 본 연구에서는 적응 필터링 이론에 의한 소음원의 입력신호에 대한 최적 한 예측으로써 부가음을 발생시키고, 입력신호 및 제어된 출력신호간의 차인 오차를 최소화 시키도록 하는 오차적응제어법을 이용한 능동소음 제어 방법 을 제시하였다. 이와 아울러 제어계의 환경변화에 따른 파라메타의 변화에 적응적으로 응답이 가능해야 하는 적응 소음제어 시스템에서, 음향궤환과 함 께 필히 고려해야 하는 부가적인 전달함수의 영향을 고려한 능동 소음제어 에 대해 연구하였다. 경량화 추세에 따라 지반이나 케이싱이 경량이거나 유연하여 회전축과 동적으로 연성된 경우 회전축-베어링-지반으로 이루어진 2중구조의 회전축 계 동특성을 해석할 수 있는 프로그램을 개발하므로서 회전 기계류의 진동 전반에 걸친 문제점에 대한 그 원인과 현상을 명확히 분석하여 국내의 전기 계류의 보다 신뢰성있는 설계 및 제작자료를 확보하는데 기여할 수 있게 하 였다.존의 small molecular Gd-chelate에 비해 매우 큼을 알 수 있었다. MnPC는 간세포에 흡수된 후 담도계로 배출되는 간특이성 조영제임을 확인하였다. 장비 내에서 반복 시행한 평균값의 차이는 대체적으로 유의한 차이가 없었으나, 다른 장비에서 반복 시행한 장비간의 사이에는 유의한 차이가 있는 경우가 더 많았다. 따라서 , MRS 검사를 소뇌나 뇌교의 어떤 절환에 적용하기 전에 각 장비 마다 정상 기준치를 반드시 얻은 후에 이상여부를 판 정하는 것이 필수적이라고 생각된다.EX> 이상이 적절한 진단기준으로 생각되었다. $0.4{\;}\textrm{cm}^3$ 이상의 좌우 부피차를 보이는 모든 증례에서 육안적으로도 해마위축이 뚜렷이 나타났다. 결론 : MR영상을 이용한 해마의 부피측정은 해마경화증 환자의 진단에 있어 육안적인 MR 진단이 어려운 제한된 경우에만 실제적 도움을 줄 수 있는 보조적인 방법으로 생각된다.ofile whereas relaxivity at high field is not affected by τS. On the other hand, the change in τV does not affect low field profile but strongly in fluences on both inflection fie이 and the maximum relaxivity value. The results shows a fluences on both inflection field

• Journal of radiological science and technology
• /
• v.40 no.2
• /
• pp.275-280
• /
• 2017

In addition to tumors, normal tissues, such as the brain and myocardium can intake $^{18}F$-FDG, and the amount of $^{18}F$-FDG intake by normal tissues can be altered by the surrounding environment. Therefore, a process is necessary during which the contrasts of the tumor and normal tissues can be enhanced. Thus, this study examines the effects of glucose levels on FDG PET images of brain tissues, which features high glucose activity at all times, in small animals. Micro PET scan was performed on fourteen mice after injecting $^{18}F$-FDG. The images were compared in relation to fasting. The findings showed that the mean SUV value w as 0.84 higher in fasted mice than in non-fasted mice. During observation, the images from non-fasted mice showed high accumulation in organs other than the brain with increased surrounding noise. In addition, compared to the non-fasted mice, the fasted mice showed higher early intake and curve increase. The findings of this study suggest that fasting is important in assessing brain functions in brain PET using $^{18}F$-FDG. Additional studies to investigate whether caffeine levels and other preprocessing items have an impact on the acquired images would contribute to reducing radiation exposure in patients.

• Polymer(Korea)
• /
• v.34 no.3
• /
• pp.282-288
• /
• 2010

The porcine small intestinal submucosa (SIS) has been widely used as a biomaterial without immuno rejection responses and hyalunonic acid (HA) can be used as biocompatible materials to regenerate tissue. We developed the SIS sponge and HA loaded SIS sponges (SIS/HA) for the possibility of the application of the tissue engineering using annulus fibrosus (AF). SEM observation shows that SIS and SIS/HA sponges have interconnected and open pores. We demonstrated the presence of HA in SIS/HA sponge from C-O functional group observed by the FTIR analysis. In conclusion, we suggest that SIS/HA sponge may be useful to tissue engineering using AF cell. This may be due to the enhanced biocompatibility and higher water retention capacity of HA.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.3
• /
• pp.348-356
• /
• 2014

The existing effective path-length model of ITU-R has some drawbacks: The prediction error is quite large compared to domestic measurement data and it is an empirical model in which the physical characteristics of rain cells are not considered. In this paper, a theoretical model for effective path-length using the rain-cell concept was proposed and its validity was verified using the measurement data. To analyze the statistical characteristics of rain cell parameters, the weather-radar data(CAPPI) measured by Korea Meterological Administration were analyzed and the correction factor was properly introduced to fit the Chollian beacon measurement data of ETRI(Electronics and Telecommunications Research Institute). To verify the proposed effective path-length model, it was compared with the Mugunghwa No. 5 beacon data measured in Chungnam National University with the support of ADD(Agency for Defense Development). It was confirmed that the prediction results of the proposed model are in good agreement with the measurement data.

• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.627-634
• /
• 2020

Instead of lead, we intend to develop shielding materials for morphological implementation by mixing barium sulfate, an eco-friendly substance, and PLA filament, a 3D printer material. The environmental substance, barium sulfate powder and PLA filament, a 3D printer material, were used, and the shielding was made with a 3D printer after being fused into an extruder to mix the powder powder of barium sulfate with PLA. To check the mixing ratio of barium sulfate powder and PLA filament, the mixing input was analyzed, and the absorption dose by thickness according to barium sulfate content was obtained to check the shielding function of the mixed shielding. In the evaluation of the mixture of sulfate barium powder particles and PLA filaments, it was mixed in the most appropriate proportion when the content was 30% in the apparent and electron microscopic observation photographs. In the absorption dose results by thickness according to barium sulfate content, the difference between the content of 0% and the content of each % was greatest at 0.5 cm in thickness and the lowest dose value at 3 cm in thickness when the barium content was 30%. In addition, as the barium content began to increase at 30%, the absorbed dose value increased again. Instead of conventional lead, barium sulfate, an eco-friendly substance, could be mixed with PLA, a filament material, to create morphological shielding. Based on this study, it is expected that the mixing ratio of barium to the mixture is the most appropriate 30%, and will be used as the basis for the implementation of morphological shielding using 3D printers in the diagnosis and treatment section.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.7071-7077
• /
• 2015

In recently, the demand of cover-glass is increased because smart phone, tablet pc, and electrical device has become widely used. The display of mobile device is enlarged, so it is necessary to have a high strength against the external force such as contact or falling. In fabrication process of cover-glass, a grinding process is very important process to obtain high strength of glass. Conventional grinding process using a grinding wheel is caused such as a scratch, chipping, notch, and micro-crack on a surface. In this paper, polishing system using a abrasive film was developed for a grinding of mobile cover-glass. To evaluate structural stability of the designed system, finite element model of the polishing system is generated, and multi-body dynamic analysis of abrasive film polishing machine is proposed. As a result of the analysis, stress and displacement analysis of abrasive film polishing system are performed, and using laser displacement sensor, structural stability of abrasive film polishing system is confirmed by measuring displacement.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2000.11a
• /
• pp.575-585
• /
• 2000

본 사업은 1994년부터 1996년까지 3년 간 시범사업으로 추진된 지역정보화 사업의 과제인 창원/마산 지역정보 유통망 구축사업을 확대 발전시키고 시스템 운영의 효율화를 도모하고자 DB를 통합하여 확대 재 구축함으로써 전자상거래 기반의 인터넷을 통한 웹 정보 이용 활성화 차원에서 추진되었다. 기 구축되었던 $\ulcorner$창원/마산 지역정보유통망 구축사업$\lrcorner$은 정보화를 통한 지역경제 발전에 일익을 담당하고자 관. 산. 연이 참여한 지역정보화 사업이다. 이러한 창원/마산지역 산업체에 대한 지원효과를 이번에 확대하여 그 동안 Multimedia, Graphics, Web 등 정보화 환경이 크게 변화, 발전됨에 따라 현실적이며 현장적용형 패키지의 개발 지원이 대두된 $\ulcorner$경남지역 정보화확산사업$\lrcorner$은 연구개발정보센터와 창원시, 진해시, 한국기계연구원이 매칭 펀드에 의한 대응자금으로 구축한 시스템이다. 정보수집대상은 경남지역에 소재하고 있는 20개 산업단지 3,700여 입주기업을 정보수집요원이 직접 방문하여 현장에서 필요로 하는 요구정보를 반영하였다. 신규로 구축한 정보는 산업기반 기업체기본정보 DB 및 기업 기술개발 현장적용형 기술정보 패키지정보를 중심으로 구축하였으며, 인터넷 활용교육을 통한 동종 업종간 정보교류체제 구축하였다. 특히 Cyber Market을 구현하기 위해 1,200여건의 기업체정보 및 제조상품 DB를 응용한 제품 Mall 데이터베이스를 구축하였다. 본 사업을 통하여 경남지역 산업단지에 입주한 기업체의 정보 활용을 극대화하여 지역경제 발전에 기여함과 동시에 국내 지역정보화 시범모델로서 위상을 확립하고자 한다.을 기업의 타인자본비용과 자기자본비용의 조합인 기회자본비용으로 할인함으로써 현재의 기업가치를 구할 수 있기 때문이다. 이처럼 기업이 영업활동이나 투자활동을 통해 현금을 창출하고 소비하는 경향은 해당 비즈니스 모델의 성격을 규정하는 자료도로 이용될 수 있다. 또한 최근 인터넷기업들의 부도가 발생하고 있는데, 기업의 부실원인이 어떤 것이든 사회전체의 생산력의 감소, 실업의 증가, 채권자 및 주주의 부의 감소, 심리적 불안으로 인한 경제활동의 위축, 기업 노하우의 소멸, 대외적 신용도의 하락 등과 같은 사회적·경제적 파급효과는 대단히 크다. 이상과 같은 기업부실의 효과를 고려할 때 부실기업을 미리 예측하는 일종의 조기경보장치를 갖는다는 것은 중요한 일이다. 현금흐름정보를 이용하여 기업의 부실을 예측하면 기업의 부실징후를 파악하는데 그치지 않고 부실의 원인을 파악하고 이에 대한 대응 전략을 수립하며 그 결과를 측정하는데 활용될 수도 있다. 따라서 본 연구에서는 기업의 부도예측 정보 중 현금흐름정보를 통하여 '인터넷기업의 미래 현금흐름측정, 부도예측신호효과, 부실원인파악, 비즈니스 모델의 성격규정 등을 할 수 있는가'를 검증하려고 한다. 협력체계 확립, ${\circled}3$ 전문인력 확보 및 인력구성 조정, 그리고 ${\circled}4$ 방문보건사업의 강화 등이다., 대사(代謝)와 관계(關係)있음을 시사(示唆)해 주고 있다.ble nutrient (TDN) was highest in booting stage (59.7%); however no significant difference was found among other stages. The concentrations of Ca and P were not different