• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.1
• /
• pp.32-36
• /
• 2016

Purpose In nuclear medicine examination, $^{131}I$ is widely used in nuclear medicine examination such as diagnosis, treatment, and others of thyroid cancer and other diseases. $^{131}I$ conducts examination and treatment through emission of ${\gamma}$ ray and ${\beta}^-$ ray. Since $^{131}I$ (364 keV) contains more energy compared to $^{99m}Tc$ (140 keV) although it displays high integrated rate and enables quick discharge through kidney, the objective of this study lies in comparing the difference in exposure dose of $^{131}I$ before and after wearing apron when handling $^{131}I$ with focus on 3 elements of external exposure protection that are distance, time, and shield in order to reduce the exposure to technicians in comparison with $^{99m}Tc$ during the handling and administration process. When wearing apron (in general, Pb 0.5 mm), $^{99m}Tc$ presents shield of over 90% but shielding effect of $^{131}I$ is relatively low as it is of high energy and there may be even more exposure due to influence of scattered ray (secondary) and bremsstrahlung in case of high dose. However, there is no special report or guideline for low dose (74 MBq) high energy thus quantitative analysis on exposure dose of technicians will be conducted based on apron wearing during the handling of $^{131}I$. Materials and Methods With patients who visited Department of Nuclear Medicine of our hospital for low dose $^{131}I$ administration for thyroid cancer and diagnosis for 7 months from Jun 2014 to Dec 2014 as its subject, total 6 pieces of TLD was attached to interior and exterior of apron placed on thyroid, chest, and testicle from preparation to administration. Then, radiation exposure dose from $^{131}I$ examination to administration was measured. Total procedure time was set as within 5 min per person including 3 min of explanation, 1 min of distribution, and 1 min of administration. In regards to TLD location selection, chest at which exposure dose is generally measured and thyroid and testicle with high sensitivity were selected. For preparation, 74 MBq of $^{131}I$ shall be distributed with the use of $2m{\ell}$ syringe and then it shall be distributed after making it into dose of $2m{\ell}$ though dilution with normal saline. When distributing $^{131}I$ and administering it to the patient, $100m{\ell}$ of water shall be put into a cup, distributed $^{131}I$ shall be diluted, and then oral administration to patients shall be conducted with the distance of 1m from the patient. The process of withdrawing $2m{\ell}$ syringe and cup used for oral administration was conducted while wearing apron and TLD. Apron and TLD were stored at storage room without influence of radiation exposure and the exposure dose was measured with request to Seoul Radiology Services. Results With the result of monthly accumulated exposure dose of TLD worn inside and outside of apron placed on thyroid, chest, and testicle during low dose $^{131}I$ examination during the research period divided by number of people, statistics processing was conducted with Wilcoxon Signed Rank Test using SPSS Version. 12.0K. As a result, it was revealed that there was no significant difference since all of thyroid (p = 0.345), chest (p = 0.686), and testicle (p = 0.715) were presented to be p > 0.05. Also, when converting the change in total exposure dose during research period into percentage, it was revealed to be -23.5%, -8.3%, and 19.0% for thyroid, chest, and testicle respectively. Conclusion As a result of conducting Wilcoxon Signed Rank Test, it was revealed that there is no statistically significant difference (p > 0.05). Also, in case of calculating shielding rate with accumulate exposure dose during 7 months, it was revealed that there is irregular change in exposure dose for inside and outside of apron. Although the degree of change seems to be high when it is expressed in percentage, it cannot be considered a big change since the unit of accumulated exposure dose is in decimal points. Therefore, regardless of wearing apron during high energy low dose $^{131}I$ administration, placing certain distance and terminating the administration as soon as possible would be of great assistance in reducing the exposure dose. Although this study restricted $^{131}I$ administration time to be within 5 min per person and distance for oral administration to be 1m, there was a shortcoming to acquire accurate result as there was insufficient number of N for statistics and it could be processed only through non-parametric method. Also, exposure dose per person during lose dose $^{131}I$ administration was measured with accumulated exposure dose using TLD rather than through direct-reading exposure dose thus more accurate result could be acquired when measurement is conducted using electronic dosimeter and pocket dosimeter.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.4
• /
• pp.558-570
• /
• 1996

Background : The detection of Collapsible airways has important therapeutic implications in chronic airway disease and bronchial asthma. The distinction of a purely collapsible airways disease from that of asthma is important because the treatment of the dormer may include the use of pursed lip breathing or nasal positive pressure ventilation whereas in the latter, pharmacologic approaches are used. One form of irreversible airflow limitation is collapsible airways, which has been shown to be a Component of asthma or to emphysema, it can be assessed by the volume difference between what exits the lung as determined by a spirometer and the volume compressed as measured by the plethysmography. Method : To investigate whether volume difference between slow and forced vital Capacity(SVC-FVC) by spirometry may be used as a surrogate index of airway collapse, we examined pulmonary function parameters before and after bronchodilator agent inhalation by spirometry and body plethysmography in 20 cases of patients with evidence of airflow limitation(chronic obstructive pulmonary disease 12 cases, stable bronchial asthma 7 cases, combined chronic obstructive pulmonary disease with asthma 1 case) and 20 cases of normal subjects without evidence of airflow limitation referred to the Pusan National University Hospital pulmonary function laboratory from January 1995 to July 1995 prospectively. Results : 1) Average and standard deviation of age, height, weight of patients with airflow limitation was $58.3{\pm}7.24$(yr), $166{\pm}8.0$(cm), $59.0{\pm}9.9$(kg) and those of normal subjects was $56.3{\pm}12.47$(yr), $165.9{\pm}6.9$(cm), $64.4{\pm}10.4$(kg), respectively. The differences of physical characteristics of both group were not significant statistically and male to female ratio was 14:6 in both groups. 2) The difference between slow vital capacity and forced vital capacity was $395{\pm}317ml$ in patients group and $154{\pm}176ml$ in normal group and there was statistically significance between two groups(p<0.05). Sensitivity and specificity were most higher when the cut-off value was 208ml. 3) After bronchodilator inhalation, reversible airway obstructions were shown in 16 cases of patients group, 7 cases of control group(p<0.05) by spirometry or body plethysmography d the differences of slow vital capacity and forced vital capacity in bronchodilator response group and nonresponse group were $300.4{\pm}306ml$, $144.7{\pm}180ml$ and this difference was statistically significant. 4) The difference between slow vital capacity and forced vital capacity before bronchodilator inhalation was correlated with airway resistance before bronchodilator(r=0.307 p=0.05), and the difference between slow vital capacity and forced vital capacity after bronchodilator was correlated with difference between slow vital capacity and forced vital capacity(r=0.559 p=0.0002), thoracic gas volume(r=0.488 p=0.002) before bronchodilator and airway resistance(r=0.583 p=0.0001), thoracic gas volume(r=0.375 p=0.0170) after bronchodilator, respectively. 5) The difference between slow vital capacity and forced vital capacity in smokers and nonsmokers was $257.5{\pm}303ml$, $277.5{\pm}276ml$, respectively and this difference did not reach statistical significance(p>0.05). Conclusion : The difference between slow vital capacity and forced vital capacity by spirometry may be useful for the detection of collapsible airway and may help decision making of therapeutic plans.

• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.349-356
• /
• 2006

We have investigated adsorption and desorption properties of CO adsorption on silica supported Ru/Ni alloys at various Ru/Ni mole content ratio as well as CO partial pressures using Fourier transform infrared spectrometer (FT-IR). For Ru-$SiO_{2}$ sample, four bands were observed at $2080.0cm^{-1}$, $2021.0{\sim}2030.7cm^{-1}$, $1778.9{\sim}1799.3cm^{-1}$, $1623.8cm^{-1}$ on adsorption and three bands were observed at $2138.7cm^{-1}$, $2069.3cm^{-1}$, $1988.3{\sim}2030.7cm^{-1}$ on vacumn desorption. For Ni-$SiO_{2}$ sample, four bands were observed at $2057.7cm^{-1}$, $2019.1{\sim}2040.3cm^{-1}$, $1862.9{\sim}1868.7cm^{-1}$, $1625.7cm^{-1}$ on adsorption and two bands were observed at $2009.5{\sim}2040.3cm^{-1}$, $1828.4{\sim}1868.7cm^{-1}$ on vacumn desorption. These absorption bands correspond with those of the previous reports approximately. For Ru/Ni(9/1, 8/2, 7/3, 6/4, 5/5; mole content ratio)-$SiO_{2}$ samples, three bands were observed at $2001.8{\sim}2057.7cm^{-1}$, $1812.8{\sim}1926.5cm^{-1}$, $1623.8{\sim}1625.7cm^{-1}$ on adsorption and three bands were observed at $2140.6cm^{-1}$, $2073.1cm^{-1}$, $1969.0{\sim}2057.7cm^{-1}$ on vacumn desorption. The spectrum pattern observed for Ru/Ni-$SiO_{2}$ sample at 9/1 Ru/Ni mole content ratio on CO adsorption and on vacumn desorption is almost like the spectrum pattern observed for Ru-$SiO_{2}$ sample. But the spectrum patterns observed for Ru/Ni-$SiO_{2}$ samples under 8/2 Ru/Ni mole content ratio on CO adsorption and vacumn desorption are almost like the pattern observed for $Ni-SiO_{2}$ sample. It may be suggested surfaces of alloy clusters on the Ru/Ni-$SiO_{2}$ samples contain more Ni components than the mole content ratio of the sample considering the above phenomena. With Ru/Ni-$SiO_{2}$ samples the absorption band shifts may be ascribed to variations of surface concentration, strain variation due to atomic size difference, variation of bonding energy and electronic densities, and changes of surface geometries according to surface concentration variation. Studies for CO adsorption on Ru/Ni alloy cluster surface by LEED and Auger spectroscopy, interation between Ru/Ni alloy cluster and $SiO_{2}$, and MO calculation for the system would be needed to look into the phenomena.

• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.2
• /
• pp.145-156
• /
• 2015

Purpose : The purpose of this study is to evaluate the efficiency of Split VMAT planning(Contouring rectum divided into an upper and a lower for reduce rectum dose) compare to Conventional VMAT planning(Contouring whole rectum) for prostate cancer radiotherapy involving pelvic lymph nodes. Materials and Methods : A total of 9 cases were enrolled. Each case received radiotherapy with Split VMAT planning to the prostate involving pelvic lymph nodes. Treatment was delivered using TrueBeam STX(Varian Medical Systems, USA) and planned on Eclipse(Ver. 10.0.42, Varian, USA), PRO3(Progressive Resolution Optimizer 10.0.28), AAA(Anisotropic Analytic Algorithm Ver. 10.0.28). Lower rectum contour was defined as starting 1cm superior and ending 1cm inferior to the prostate PTV, upper rectum is a part, except lower rectum from the whole rectum. Split VMAT plan parameters consisted of 10MV coplanar $360^{\circ}$ arcs. Each arc had $30^{\circ}$ and $30^{\circ}$ collimator angle, respectively. An SIB(Simultaneous Integrated Boost) treatment prescription was employed delivering 50.4Gy to pelvic lymph nodes and 63~70Gy to the prostate in 28 fractions. $D_{mean}$ of whole rectum on Split VMAT plan was applied for DVC(Dose Volume Constraint) of the whole rectum for Conventional VMAT plan. In addition, all parameters were set to be the same of existing treatment plans. To minimize the dose difference that shows up randomly on optimizing, all plans were optimized and calculated twice respectively using a 0.2cm grid. All plans were normalized to the prostate $PTV_{100%}$ = 90% or 95%. A comparison of $D_{mean}$ of whole rectum, upperr ectum, lower rectum, and bladder, $V_{50%}$ of upper rectum, total MU and H.I.(Homogeneity Index) and C.I.(Conformity Index) of the PTV was used for technique evaluation. All Split VMAT plans were verified by gamma test with portal dosimetry using EPID. Results : Using DVH analysis, a difference between the Conventional and the Split VMAT plans was demonstrated. The Split VMAT plan demonstrated better in the $D_{mean}$ of whole rectum, Up to 134.4 cGy, at least 43.5 cGy, the average difference was 75.6 cGy and in the $D_{mean}$ of upper rectum, Up to 1113.5 cGy, at least 87.2 cGy, the average difference was 550.5 cGy and in the $D_{mean}$ of lower rectum, Up to 100.5 cGy, at least -34.6 cGy, the average difference was 34.3 cGy and in the $D_{mean}$ of bladder, Up to 271 cGy, at least -55.5 cGy, the average difference was 117.8 cGy and in $V_{50%}$ of upper rectum, Up to 63.4%, at least 3.2%, the average difference was 23.2%. There was no significant difference on H.I., and C.I. of the PTV among two plans. The Split VMAT plan is average 77 MU more than another. All IMRT verification gamma test results for the Split VMAT plan passed over 90.0% at 2 mm / 2%. Conclusion : As a result, the Split VMAT plan appeared to be more favorable in most cases than the Conventional VMAT plan for prostate cancer radiotherapy involving pelvic lymph nodes. By using the split VMAT planning technique it was possible to reduce the upper rectum dose, thus reducing whole rectal dose when compared to conventional VMAT planning. Also using the split VMAT planning technique increase the treatment efficiency.

• Radiation Oncology Journal
• /
• v.19 no.1
• /
• pp.66-73
• /
• 2001

Purpose : For the research of Boron Neutron Capture Therapy (BNCT), fast neutrons generated from the MC-50 cyclotron with maximum energy of 34.4 MeV in Korea Cancer Center Hospital were moderated by 70 cm paraffin and then the dose characteristics were investigated. Using these results, we hope to establish the protocol about dose measurement of epi-thermal neutron, to make a basis of dose characteristic of epi-thermal neutron emitted from nuclear reactor, and to find feasibility about accelerator-based BNCT. Method and Materials : For measuring the absorbed dose and dose distribution of fast neutron beams, we used Unidos 10005 (PTW, Germany) electrometer and IC-17 (Far West, USA), IC-18, ElC-1 ion chambers manufactured by A-150 plastic and used IC-l7M ion chamber manufactured by magnesium for gamma dose. There chambers were flushed with tissue equivalent gas and argon gas and then the flow rate was S co per minute. Using Monte Carlo N-Particle (MCNP) code, transport program in mixed field with neutron, photon, electron, two dimensional dose and energy fluence distribution was calculated and there results were compared with measured results. Results : The absorbed dose of fast neutron beams was $6.47\times10^{-3}$ cGy per 1 MU at the 4 cm depth of the water phantom, which is assumed to be effective depth for BNCT. The magnitude of gamma contamination intermingled with fast neutron beams was $65.2{\pm}0.9\%$ at the same depth. In the dose distribution according to the depth of water, the neutron dose decreased linearly and the gamma dose decreased exponentially as the depth was deepened. The factor expressed energy level, $D_{20}/D_{10}$, of the total dose was 0.718. Conclusion : Through the direct measurement using the two ion chambers, which is made different wall materials, and computer calculation of isodose distribution using MCNP simulation method, we have found the dose characteristics of low fluence fast neutron beams. If the power supply and the target material, which generate high voltage and current, will be developed and gamma contamination was reduced by lead or bismuth, we think, it may be possible to accelerator-based BNCT.

• Journal of Intelligence and Information Systems
• /
• v.26 no.4
• /
• pp.27-65
• /
• 2020

Many companies on information and communication technology make public their own developed AI technology, for example, Google's TensorFlow, Facebook's PyTorch, Microsoft's CNTK. By releasing deep learning open source software to the public, the relationship with the developer community and the artificial intelligence (AI) ecosystem can be strengthened, and users can perform experiment, implementation and improvement of it. Accordingly, the field of machine learning is growing rapidly, and developers are using and reproducing various learning algorithms in each field. Although various analysis of open source software has been made, there is a lack of studies to help develop or use deep learning open source software in the industry. This study thus attempts to derive a strategy for adopting the framework through case studies of a deep learning open source framework. Based on the technology-organization-environment (TOE) framework and literature review related to the adoption of open source software, we employed the case study framework that includes technological factors as perceived relative advantage, perceived compatibility, perceived complexity, and perceived trialability, organizational factors as management support and knowledge & expertise, and environmental factors as availability of technology skills and services, and platform long term viability. We conducted a case study analysis of three companies' adoption cases (two cases of success and one case of failure) and revealed that seven out of eight TOE factors and several factors regarding company, team and resource are significant for the adoption of deep learning open source framework. By organizing the case study analysis results, we provided five important success factors for adopting deep learning framework: the knowledge and expertise of developers in the team, hardware (GPU) environment, data enterprise cooperation system, deep learning framework platform, deep learning framework work tool service. In order for an organization to successfully adopt a deep learning open source framework, at the stage of using the framework, first, the hardware (GPU) environment for AI R&D group must support the knowledge and expertise of the developers in the team. Second, it is necessary to support the use of deep learning frameworks by research developers through collecting and managing data inside and outside the company with a data enterprise cooperation system. Third, deep learning research expertise must be supplemented through cooperation with researchers from academic institutions such as universities and research institutes. Satisfying three procedures in the stage of using the deep learning framework, companies will increase the number of deep learning research developers, the ability to use the deep learning framework, and the support of GPU resource. In the proliferation stage of the deep learning framework, fourth, a company makes the deep learning framework platform that improves the research efficiency and effectiveness of the developers, for example, the optimization of the hardware (GPU) environment automatically. Fifth, the deep learning framework tool service team complements the developers' expertise through sharing the information of the external deep learning open source framework community to the in-house community and activating developer retraining and seminars. To implement the identified five success factors, a step-by-step enterprise procedure for adoption of the deep learning framework was proposed: defining the project problem, confirming whether the deep learning methodology is the right method, confirming whether the deep learning framework is the right tool, using the deep learning framework by the enterprise, spreading the framework of the enterprise. The first three steps (i.e. defining the project problem, confirming whether the deep learning methodology is the right method, and confirming whether the deep learning framework is the right tool) are pre-considerations to adopt a deep learning open source framework. After the three pre-considerations steps are clear, next two steps (i.e. using the deep learning framework by the enterprise and spreading the framework of the enterprise) can be processed. In the fourth step, the knowledge and expertise of developers in the team are important in addition to hardware (GPU) environment and data enterprise cooperation system. In final step, five important factors are realized for a successful adoption of the deep learning open source framework. This study provides strategic implications for companies adopting or using deep learning framework according to the needs of each industry and business.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47
• /
• pp.15-32
• /
• 2002

The endeavors enhancing the grain quality of high-yielding japonica rice were steadily continued during 1980s-1990s along with the self-sufficiency of rice production and the increasing demands of high-quality rices. During this time, considerably great progress and success was obtained in development of high-quality japonica cultivars and quality evaluation techniques including the elucidation of interrelationship between the physicochemical properties of rice grain and the physical or palatability components of cooked rice. In 1990s, some high-quality japonica rice cultivars and special rices adaptable for food processing such as large kernel, chalky endosperm, aromatic and colored rices were developed and its objective preference and utility was also examined by a palatability meter, rapid-visco analyzer and texture analyzer, Recently, new special rices such as extremely low-amylose dull or opaque non-glutinous endosperm mutants were developed. Also, a high-lysine rice variety was developed for higher nutritional utility. The water uptake rate and the maximum water absorption ratio showed significantly negative correlations with the K/Mg ratio and alkali digestion value(ADV) of milled rice. The rice materials showing the higher amount of hot water absorption exhibited the larger volume expansion of cooked rice. The harder rices with lower moisture content revealed the higher rate of water uptake at twenty minutes after soaking and the higher ratio of maximum water uptake under the room temperature condition. These water uptake characteristics were not associated with the protein and amylose contents of milled rice and the palatability of cooked rice. The water/rice ratio (in w/w basis) for optimum cooking was averaged to 1.52 in dry milled rices (12% wet basis) with varietal range from 1.45 to 1.61 and the expansion ratio of milled rice after proper boiling was average to 2.63(in v/v basis). The major physicochemical components of rice grain associated with the palatability of cooked rice were examined using japonica rice materials showing narrow varietal variation in grain size and shape, alkali digestibility, gel consistency, amylose and protein contents, but considerable difference in appearance and texture of cooked rice. The glossiness or gross palatability score of cooked rice were closely associated with the peak, hot paste and consistency viscosities of viscosities with year difference. The high-quality rice variety "IIpumbyeo" showed less portion of amylose on the outer layer of milled rice grain and less and slower change in iodine blue value of extracted paste during twenty minutes of boiling. This highly palatable rice also exhibited very fine net structure in outer layer and fine-spongy and well-swollen shape of gelatinized starch granules in inner layer and core of cooked rice kernel compared with the poor palatable rice through image of scanning electronic microscope. Gross sensory score of cooked rice could be estimated by multiple linear regression formula, deduced from relationship between rice quality components mentioned above and eating quality of cooked rice, with high probability of determination. The $\alpha$-amylose-iodine method was adopted for checking the varietal difference in retrogradation of cooked rice. The rice cultivars revealing the relatively slow retrogradation in aged cooked rice were IIpumbyeo, Chucheongyeo, Sasanishiki, Jinbubyeo and Koshihikari. A Tonsil-type rice, Taebaegbyeo, and a japonica cultivar, Seomjinbyeo, showed the relatively fast deterioration of cooked rice. Generally, the better rice cultivars in eating quality of cooked rice showed less retrogradation and much sponginess in cooled cooked rice. Also, the rice varieties exhibiting less retrogradation in cooled cooked rice revealed higher hot viscosity and lower cool viscosity of rice flour in amylogram. The sponginess of cooled cooked rice was closely associated with magnesium content and volume expansion of cooked rice. The hardness-changed ratio of cooked rice by cooling was negatively correlated with solids amount extracted during boiling and volume expansion of cooked rice. The major physicochemical properties of rice grain closely related to the palatability of cooked rice may be directly or indirectly associated with the retrogradation characteristics of cooked rice. The softer gel consistency and lower amylose content in milled rice revealed the higher ratio of popped rice and larger bulk density of popping. The stronger hardness of rice grain showed relatively higher ratio of popping and the more chalky or less translucent rice exhibited the lower ratio of intact popped brown rice. The potassium and magnesium contents of milled rice were negatively associated with gross score of noodle making mixed with wheat flour in half and the better rice for noodle making revealed relatively less amount of solid extraction during boiling. The more volume expansion of batters for making brown rice bread resulted the better loaf formation and more springiness in rice breed. The higher protein rices produced relatively the more moist white rice bread. The springiness of rice bread was also significantly correlated with high amylose content and hard gel consistency. The completely chalky and large grain rices showed better suitability far fermentation and brewing. The glutinous rice were classified into nine different varietal groups based on various physicochemical and structural characteristics of endosperm. There was some close associations among these grain properties and large varietal difference in suitability to various traditional food processing. Our breeding efforts on improvement of rice quality for high palatability and processing utility or value-adding products in the future should focus on not only continuous enhancement of marketing and eating qualities but also the diversification in morphological, physicochemical and nutritional characteristics of rice grain suitable for processing various value-added rice foods.ice foods.

• Journal of Information Management
• /
• v.6 no.5
• /
• pp.131-134
• /
• 1973

본고(本稿)시리이즈의 제1보(第一報)에서 우리는 물리(物理), 사회과학(社會科學) 및 공학분야(工學分野)의 12,442명(名)의 과학자(科學者)와 기술자(技術者)에 대한 정보교환활동(情報交換活動)의 78례(例)에 있어서 일반과정(一般過程)과 몇 가지 결과(結果)를 기술(記述)한 바 있다. 4년반(年半) 이상(以上)의 기간(其間)($1966{\sim}1971$)에서 수행(遂行)된 이 연구(硏究)는 현재(現在)의 과학지식(科學知識)의 집성체(集成體)로 과학자(科學者)들이 연구(硏究)를 시작(始作)한 때부터 기록상(記錄上)으로 연구결과(硏究結果)가 취합(聚合)될 때까지 각종(各種) 정형(定形), 비정형(非定形) 매체(媒體)를 통한 유통정보(流通情報)의 전파(傳播)와 동화(同化)에 대한 포괄적(包括的)인 도식(圖式)으로 표시(表示)할 수 있도록 설정(設定)하고 또 시행(施行)되었다. 2보(二報), 3보(三報), 4보(四報)에서는 데이터 뱅크에 수집(蒐集) 및 축적(蓄積)된 데이터의 일반적(一般的)인 기술(記述)을 적시(摘示)하였다. (1) 과학(科學)과 기술(技術)의 정보유통(情報流通)에 있어서 국가적(國家的) 회합(會合)의 역할(役割)(Garvey; 4보(報)) 국가적(國家的) 회합(會合)은 투고(投稿)와 이로 인한 잡지중(雜誌中) 게재간(揭載間)의 상대적(相對的)인 오랜 기간(期間)동안 이러한 연구(硏究)가 공개매체(公開媒體)로 인하여 일시적(一時的)이나마 게재여부(揭載如否)의 불명료성(不明瞭性)을 초래(招來)하기 전(前)에 과학연구(科學硏究)의 초기전파(初期傳播)를 위하여 먼저 행한 주요(主要) 사례(事例)와 마지막의 비정형매체(非定形媒體)의 양자(兩者)를 항상 조직화(組織化)하여 주는 전체적(全體的)인 유통과정(流通過程)에 있어서 명확(明確)하고도 중요(重要)한 기능(機能)을 갖는다는 것을 알 수 있었다. (2) 잡지(雜誌)에 게재(揭載)된 정보(情報)의 생산(生産)과 관련(關聯)되는 정보(情報)의 전파과정(傳播過程)(Garvey; 1보(報)). 이 연구(硏究)를 위해서 우리는 정보유통과정(情報流通過程)을 따라 많은 노력(努力)을 하였는데, 여기서 유통과정(流通過程)의 인상적(印象的)인 면목(面目)은 특별(特別)히 연구(硏究)로부터의 정보(情報)는 잡지(雜誌)에 게재(揭載)되기까지 진정으로는 공개적(公開的)이 못된다는 것과 이러한 사실(事實)은 선진연구(先進硏究)가 자주 시대(時代)에 뒤떨어지게 된다는 것을 발견할 수 있었다. 경험(經驗)이 많은 정보(情報)의 수요자(需要者)는 이러한 폐물화(廢物化)에 매우 민감(敏感)하며 자기(自己) 연구(硏究)에 당면한, 진행중(進行中)이거나 최근(最近) 완성(完成)된 연구(硏究)에 대하여 정보(情報)를 얻기 위한 모든 수단(手段)을 발견(發見)코자 하였다. 예를 들어, 이들은 잡지(雜誌)에 보문(報文)을 발표(發表)하기 전(前)에 발생(發生)하는 정보전파과정(情報傳播過程)을 통하여 유루(遺漏)될지도 모르는 정보(情報)를 얻기 위하여 한 잡지(雜誌)나 2차자료(二次資料) 또는 전형적(典型的)으로 이용(利用)되는 다른 잡지류중(雜誌類中)에서 당해정보(當該情報)가 발견(發見)되기를 기다리지 않는다는 것이다. (3) "정보생산 과학자(情報生産 科學者)"에 의한 정보전파(情報傳播)의 계속성(繼續性)(이 연구(硏究) 시리이즈의 결과(結果)는 본고(本稿)의 주내용(主內容)으로 되어 있다.) 1968/1969년(年)부터 1970/1971년(年)의 이년기간(二年期間)동안 보문(報文)을 낸 과학자(科學者)(1968/1969년(年) 잡지중(雜誌中)에 "질이 높은" 보문(報文)을 발표(發表)한)의 약 2/3는 1968/1969의 보문(報文)과 동일(同一)한 대상영역(對象領域)의 연구(硏究)를 계속(繼續) 수행(遂行)하였다. 그래서 우리는 본연구(本硏究)에 오른 대부분(大部分)의 저자(著者)가 정상적(正常的)인 과학(科學), 즉 연구수행중(硏究遂行中) 의문(疑問)에 대한 완전(完全)한 해답(解答)을 얻게 되는 가장 중요(重要)한 추구(追求)로서 Kuhn(제5보(第5報))에 의하여 기술(技術)된 방법(방법)으로 과학(연구)(科學(硏究))을 실행(實行)하였음을 알았다. 최근(最近)에 연구(硏究)를 마치고 그 결과(結果)를 보문(報文)으로서 발표(發表)한 이들 과학자(科學者)들은 다음 단계(段階)로 해야 할 사항(事項)에 대하여 선행(先行)된 동일견해(同一見解)를 가진 다른 연구자(硏究자)들의 연구(硏究)와 대상(對象)에 밀접(密接)하게 관련(關聯)되고 있다. 이 계속성(繼續性)의 효과(效果)에 대한 지표(指標)는 보문(報文)과 동일(同一)한 영역(領域)에서 연구(硏究)를 계속(繼續)한 저자(著者)들의 약 3/4은 선행(先行) 보문(報文)에 기술(技術)된 연구결과(硏究結果)에서 직접적(直接的)으로 새로운 연구(硏究)가 유도(誘導)되었음을 보고(報告)한 사항(事項)에 반영(反映)되어 있다. 그렇지만 우리들의 데이터는 다음 영역(領域)으로 기대(期待)하지 않은 전환(轉換)을 일으킬 수도 있음을 보여주고 있다. 동일(同一) 대상(對象)에서 연구(硏究)를 속행(續行)하였던 저자(著者)들의 1/5 이상(以上)은 뒤에 새로운 영역(領域)으로 연구(硏究)를 전환(轉換)하였고 또한 이 영역(領域)에서 연구(硏究)를 계속(繼續)하였다. 연구영역(硏究領域)의 이러한 변화(變化)는 연구자(硏究者)의 일반(一般) 정보유통(情報流通) 패턴에 크게 변화(變化)를 보이지는 않는다. 즉 새로운 지적(知的) 문제(問題)에 대한 변화(變化)에서 야기(惹起)되는 패턴에 있어서 저자(著者)들은 오래된 문제(問題)의 방법(方法)과 기술(技術)을 새로운 문제(問題)로 맞추려 한다. 과학사(科學史)의 최근(最近) 해석(解釋)(Hanson: 6보(報))에서 예기(豫期)되었던 바와 같이 정상적(正常的)인 과학(科學)의 계속성(繼續性)은 항상 절대적(絶對的)이 아니며 "과학지식(科學知識)"의 첫발자욱은 예전 연구영역(硏究領域)의 대상(對象)에 관계(關係)없이 나타나는 다른 영역(領域)으로 내딛게 될지도 모른다. 우리들의 연구(硏究)에서 저자(著者)의 1/3은 동일(同一) 영역(領域)의 대상(對象)에서 속계적(續繼的)인 연구(硏究)를 수행(遂行)치 않고 새로운 영역(領域)으로 옮아갔다. 우리는 이와 같은 데이터를 (a) 저자(著者)가 각개과학자(各個科學者)의 활동(活動)을 통하여 집중적(集中的)인 과학적(科學的) 노력(努力)을 시험(試驗)할 때 각자(各自)의 연구(硏究)에 대한 많은 양(量)의 계속성(繼續性)이 어떤 진보중(進步中)의 과학분야(科學分野)에서도 나타난다는 것과 (b) 이 계속성(繼續性)은 과학(科學)에 대한 집중적(集中的) 진보(進步)의 필요적(必要的) 특질(特質)이라는 것을 의미한다. 또한 우리는 이 계속성(繼續性)과 관련(關聯)되는 유통문제(流通問題)라는 새로운 대상영역(對象領域)으로 전환(轉換)할 때 연구(硏究)의 각단계(各段階)의 진보(進步)와 새로운 목적(目的)으로 전환시(轉換時) 양자(兩者)가 다 필요(必要)로 하는 각개(各個) 과학자(科學者)의 정보수요(情報需要)를 위한 시간(時間) 소비(消費)라는 것을 탐지(探知)할 수 있다. 이러한 관찰(觀察)은 정보(情報)의 선택제공(選擇提供)시스팀이 현재(現在) 필요(必要)로 하는 정보(情報)의 만족(滿足)을 위하여는 효과적(效果的)으로 매우 융통성(融通性)을 띠어야 한다는 것을 암시(暗示)하는 것이다. 본고(本稿)의 시리이즈에 기술(記述)된 전정보유통(全情報流通) 과정(過程)의 재검토(再檢討) 결과(結果)는 과학자(科學者)들이 항상 그들의 요구(要求)를 조화(調和)시키는 신축성(伸縮性)있는 유통체제(流通體制)를 발전(發展)시켜 왔다는 것을 시사(示唆)해 주고 있다. 이 시스팀은 정보전파(情報傳播) 사항(事項)을 중심(中心)으로 이루어 지며 또한 이 사항(事項)의 대부분(大部分)의 참여자(參與者)는 자기자신(自己自身)이 과학정보(科學情報) 전파자(傳播者)라는 기본적(基本的)인 정보전파체제(情報傳播體制)인 것이다. 그러나 이 과정(過程)의 유통행위(流通行爲)에서 살펴본 바와 같이 우리는 대부분(大部分)의 정보전파자(情報傳播者)가 역시 정보(情報)의 동화자(同化者)-다시 말해서 과학정보(科學情報)의 생산자(生産者)는 정보(情報)의 이용자(利用者)라는 것을 알 수 있다. 이 연구(硏究)에서 전형적(典型的)인 과학자((科學者)는 과학정보(科學情報)의 생산(生産)이나 전파(傳播)의 양자(兩者)에 연속적(連續的)으로 관계(關係)하고 있음을 보았다. 만일(萬一) 연구자(硏究者)가 한 편(編)의 연구(硏究)를 완료(完了)한다면 이 연구자(硏究者)는 다음에 무엇을 할 것이냐 하는 관념(觀念)을 갖게 되고 따라서 "완료(完了)된" 연구(硏究)에 관한 정보(情報)를 이용(利用)하여 동시(同時)에 새로운 일을 시작(始作)하게 된다. 예를 들어, 한 과학자(科學者)가 동일(同一) 영역(領域)의 다른 동료연구자(同僚硏究者)에게 완전(完全)하며 이의(異議)에 방어(防禦)할 수 있는 보고서(報告書)를 제공(提供)할 수 있는 단계(段階)에 도달(到達)하였다면 우리는 이 과학자(科學者)가 정보유통과정(情報流通過程)에서 많은 역할(役割)을 해낼 수 있다는 것을 알 것이다. 즉 이 과학자(科學者)는 다른 과학자(科學者)들에게 최신(最新)의 과학적(科學的) 결과(結果)를 제공(提供)할 때 하나의 과학정보(科學情報) 전파자(傳播者)가 되며, 이 연구(硏究)의 의의(意義)와 타당성(妥當性)에 관한 논평(論評)이나 비평(批評)을 동료(同僚)로부터 구(求)하는 관점(觀點)에서 보면 이 과학자(科學者)는 하나의 정보탐색자(情報探索者)가 된다. 또한 장래(將來)의 이용(利用)을 위하여 증정(贈呈)이나 동화(同化)한 이 정보(情報)로부터 피이드백을 받아 드렸을 때의 범주(範疇)에서 보면 (잡지(雜誌)에 투고(投稿)하기 위하여 원고(原稿)를 작성(作成)하는 경우에 있어서와 같이) 과학자(科學者)는 하나의 정보이용자(情報利用者)가 되고 이러한 모든 가능성(可能性)에서 정보생산자(情報生産者)는 다음 정보생산(情報生産)에 이미 들어가 있다고 볼 수 있다(저자(著者)들의 2/3는 보문(報文)이 게재(揭載)되기 전(前)에 이미 새로운 연구(硏究)를 시작(始作)하였다). 과학자(科學者)가 자기연구(自己硏究)를 마치고 예비보고서(豫備報告書)를 만든 후(後) 자기연구(自己硏究)에 관한 정보(情報)의 전파(傳播)를 계속하게 되는데 이와 관계(關係)되는 일반적(一般的)인 패턴을 보면 소수(少數)의 동료(同僚)그룹에 출석(出席)하는 경우 (예로 지역집담회)(地域集談會))와 대중(大衆) 앞에서 행(行)하는 경우(예로 국가적 회합(國家的 會合)) 등이 있다. 그러는 동안에 다양성(多樣性) 있는 성문보고서(成文報告書)가 이루어진다. 그러나 과학자(科學者)들이 자기연구(自己硏究)를 위한 주정보전파목표(主情報傳播目標)는 과학잡지중(科學雜誌中)에 게재(揭載)되는 보문(報文)이라는 것이 명확(明確)한 사실(事實)인 것이다. 이러한 목표(目標)에 도달(到達)할 때까지의 각(各) 정보전파단계(情報傳播段階)에서 과학자(科學者)들은 목표달성(目標達成)을 위하여 청중(聽衆), 자기동화(自己同化)된 정보(情報) 및 이미 이용(利用)된 정보(情報)로부터 피이드백을 탐색(探索)하게 된다. 우리가 본고(本稿)의 시리이즈중(中)에 표현(表現)하려 했던 바와 같이 이러한 활동(活動)은 조사수임자(調査受任者)의 의견(意見)이 원고(原稿)에 반영(反映)되고 또 그 원고(原稿)가 잡지게재(雜誌揭載)를 위해 수리(受理)될 때까지 계속적(繼續的)으로 정보(情報)를 탐색(探索)하는 과학자(科學者)나 기타(其他)사람들에게 효과적(效果的)이었다. 원고(原稿)가 수리(受理)되면 그 원고(原稿)의 저자(著者)들은 그 보문(報文)의 주내용(主內容)에 대하여 적극적(積極的)인 정보전파자(情報傳播者)로서의 역할(役割)을 종종 중지(中止)하는 일이 있는데 이때에는 저자(著者)들의 역할(役割)이 변화(變化)하는 것을 볼 수 있었다. 즉 이 저자(著者)들은 일시적(一時的)이긴 하나 새로운 일을 착수(着手)하기 위하여 정보(情報)의 동화자(同化者)를 찾게 된다. 또한 전(前)에 행한 일에 대한 의견(意見)이나 비평(批評)이 새로운 일에 영향(影響)을 끼치게 된다. 동시(同時)에 새로운 과학정보생산(科學情報生産) 과정(過程)에 들어가게 되고 현재(現在) 진행중(進行中)이거나 최근(最近) 완료(完了)한 연구(硏究)에 대한 정보(情報)를 항상 찾게 된다. 활발(活潑)한 연구(硏究)를 하는 과학자(科學者)들에게는, 동화자(同化者)로서의 역할(役割)과 전파자(傳播者)로서의 역할(役割)을 분리(分離)시킨다는 것은 실제적(實際的)은 못된다. 즉 후자(後者)를 완성(完成)하기 위해서는 전자(前者)를 이용(利用)하게 된다는 것이다. 과학자(科學者)들은 한 단계(段階)에서 한 전파자(傳播者)로서의 역할(役割)이 뚜렷하나 다른 단계(段階)에서는 정보교환(情報交換)이 기본적(基本的)으로 정보동화(情報同化)에 직결(直結)되고 있는 것이다. 정보전파자(情報傳播者)와 정보동화자간(情報同化者間)의 상호관계(相互關係)(또는 정보생산자(情報生産者)와 정보이용자간(情報利用者間))는 과학(科學)에 있어서 하나의 필수양상(必修樣相)이다. 과학(科學)의 유통구조(流通構造)가 전파자(傳播者)(이용자(利用者)로서의 역할(役割)보다는)의 필요성(必要性)에서 볼 때 복잡(複雜)하고 다이나믹한 시스팀으로 구성(構成)된다는 사실(事實)은 과학(科學)의 발전과정(發展過程)에서 필연적(必然的)으로 나타난다. 이와 같은 사실(事實)은 과학정보(科學情報)의 전파요원(傳播要員)이 국가적 회합(國家的 會合)에서 자기연구(自己硏究)에 대한 정보(情報)의 전파기회(傳播機會)를 거절(拒絶)하고 따라서 전파정보(電波情報)를 판단(判斷)하고 선별(選別)하는 것을 감소(減少)시키며 결과적(結果的)으로 잡지(雜誌)나 단행본(單行本)에서 비평(批評)을 하고 추고(推敲)하는 것이 배제(排除)될 때는 유형적(有形的) 과학(科學)은 급속(急速)히 비과학성(非科學性)을 띠게 된다는 것을 Lysenko의 생애(生涯)에 대한 Medvedev의 기술중(記述中)[7]에 지적(指摘)한 것과 관계(關係)되고 있다.