• 제목/요약/키워드: 전원설비

검색결과 709건 처리시간 0.032초

무전극 램프의 전원장치에 대한 기술 동향 (A Review of Power Supply Technology of Electrodeless lamps)

  • 한수빈;박석인;정봉만;장우진;함중걸
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2002년도 학술대회논문집
    • /
    • pp.197-200
    • /
    • 2002
  • This paper reviews electrodeless lamp technology. The lamp has very long life time but very high cost compared to conventional lamps such as fluorescent lamp. For optimizing the overall system in performance and cost power supply as well as lamp is very important. First, the paper describes various electrodeless lamps and its market condition. Then, a lot of circuit technology for constructing the power supply is reviewed and circuit characteristics are discussed

  • PDF

다수 분산전원 연계시 계통측 보호협조에 관한 연구 (The Study on Protective Coordination of Utility Interconnected Multiple Distributed Generations)

  • 정승복;김재철;이봉이
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2004년도 학술대회 논문집
    • /
    • pp.233-235
    • /
    • 2004
  • This paper studies protective coordination of utility interconnected multiple distirbuted generations(DG). The study of protective coordination interconnected DG has been conducted. A protective coordination of utility disturbed by reverse current of DG. Therefore, A protetive device is not operate when reverse current flows. In this paper, we use phase difference between V and I. Also, we studied protective coordination algorithm of utility interconnected multiple DG.

  • PDF

무전극 형광등용 전원 (A Study on the Power Supply for Electrodeless Lamp)

  • 한수빈;장우진
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2004년도 학술대회 논문집
    • /
    • pp.13-16
    • /
    • 2004
  • Power supply technique for electrodeless lamps is presented in this paper. The power supply uses a conventional power factor correction technique due to its proved performance. But in the inverter stage, resonant converter with parallel loading scheme is used to mitigate the variation of matching circuit characteristics by time varying load. Experiment and performance comparison for both Endura md QL are performed and further study to commercialization are discussed.

  • PDF

고역률 고압나트륨램프용 전자식 안정기 (An Electronic Ballast wish High Power Factor for High Pressure Sodium Lamps)

  • 김순기;노재엽;이진우;최종문
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2001년도 학술대회논문집
    • /
    • pp.115-118
    • /
    • 2001
  • 본 논문에서는 역률 개선용 제어 IC를 사용하여 고압나트륨램프의 역률을 개선시킨 전자석 안정기를 제안하였다. 또한 인버터 회로를 설계하여 시동전압의 과도특성을 해석하였으며, 전원측에 EMI 필터를 설계하여 전자식 안정기 시스템을 보호하였다. 자기식 안정기와 전자식 안정기에 대한 역률, THD 및 광속 등의 전기적 특성을 비교 측정하였다. 제안된 고압나트륨램프용 전자식 안정기의 출력을 측정한 결과 역률은 99.9[%], THD는 4.51[%]로 나타났다.

  • PDF

고주파 전원장치와 매칭

  • 최대규;원충연
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2002년도 학술대회논문집
    • /
    • pp.23-28
    • /
    • 2002
  • 반도체 1장을 가공하는데는 약 300개 공정에 3개월이 소요되며, 반도체 3사의 2000년도 순이익은 4조 7천억 원에 달할 것으로 전망된다. 이렇게 엄청난 부가가치 때문에 업계 뿐 아니라 국가적으로도 심혈을 기울이고 있으나 가곡기술과 물량에선 선진국일 뿐 반도체를 가공할 수 있는 장비는 전량 외산에 의존하고 있다. 이러한 현상은 미국이나 일본 등 반도체 분야 선진국들과의 경쟁에서 뒤쳐질 수 밖에 없는 구조적인 단점을 가지고 있다. 이를 극복하기 위해서 반도체 제조 장비의 국산화가 시급하며 그중 하나인 Chamber내에서 Plasma를 발생시키고 자동정합할 수 있는 시스템을 설계하고 제작코자 한다.

  • PDF

대규모 무정전 전원공급 시스템의 구성방안 (The Configurations of the large scale UPS system)

  • 송언빈;윤병도
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 1991년도 추계학술발표회논문집
    • /
    • pp.80-83
    • /
    • 1991
  • The need of UPS (Uninterruptible Power Sup-ply) system is dramatically increasing with the increased use of computers, telecommunica-tion system, building automation system, and office automation system in office buildings. The consequence of the power failure is very disas trous in intelligent office buil-dings. Thus, the nucessity of large scale UPS system with generations of large scale UPS system with generator is increasing. In this study, the configurations of large scale UPS system are reviewed and analyzed. The design guide and technical considerations of high reliability system are presented.

  • PDF

소형화를 위한 20W LED 전구 개발 (Development of 20W LED bulb for miniaturization)

  • 김진홍;송상빈;김기훈;문일권
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2007년도 춘계학술대회 논문집
    • /
    • pp.64-69
    • /
    • 2007
  • 실내조명의 조도 기준을 만족하는 LED Bulb를 개발하기 위하여 LED 개수를 선정하고, 실내 전반 조명에 적합한 배광을 실현하기 위한 렌즈설계를 하였다. 그리고 LED로부터 발산되는 열을 최적화하기 위한 방열설계를 행하여 주위온도 $50^{circ}C$ 이내에서 동작 가능하도록 하였다. 또한 시제품의 외함에 내장되어 질 수 있는 소형의 20[W]급 전원회로를 설계하고, 시제품을 직접 제작하였다. 시제품의 전기적, 광학적 성능은 CFL의 성능과 거의 동일하다.

  • PDF

유도성 주기 대역 저지구조를 이용한 적층구조 전원공급면의 불요공진 억제 (Removing the Resonance due to the Power-Bus Structure using EBG Inductive Sheets)

  • 강승택;김형석;장건호;임동진
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2009년도 정보통신설비 학술대회
    • /
    • pp.138-140
    • /
    • 2009
  • This paper investigates a method to remove the undesirable resonance of the rectangular power-bus structure(PBS) using an inductive layer. The equivalent surface impedance of the proposed loading is calculated for characterizing the proposed EBG geometry. The effects of the strips and the immediate surroundings are illustrated by a number of numerical experiments.

  • PDF

1970년도 전력사업의 전망 (한전의 주요 사업계획)

  • 대한전기협회
    • 전기저널
    • /
    • 12호통권18호
    • /
    • pp.8-8
    • /
    • 1969
  • 1970년도 전력사업은 전원개발의 촉진과 공급신뢰도의 향상을 위한 제사업들이 중점적으로 추진된다. 전력수요의 급속한 증가추세에 대비하여 발전설비의 건설공사가 계속 진전될 뿐 아니라 이와 병행하여 송배전 등 공급설비의 확장공사가 대대적으로 추진된다. 그리고 새해에는 우리나라에서 처음으로 시도되는 60만Kw의 원자력발전소와 345Kv 초고압송전선로의 건설공사가 착공되며 양수발전소 건설을 위한 기술검토가 매듭을 짓게됨으로써 우리나라의 전력사업은 그 규모와 내용에 있어서 새로운 전기를 마련하게 된다.

  • PDF

전류공급 Push-pull형 ZVS 고주파 발진전원장치 (Current-fed Push-pull type ZVS high frequency oscillating power supply)

  • 송진화;서철식;이경호;김종해;노채균
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 1999년도 학술대회논문집-국제 전기방전 및 플라즈마 심포지엄 Proceedings of 1999 KIIEE Annual Conference-International Symposium of Electrical Discharge and Plasma
    • /
    • pp.189-194
    • /
    • 1999
  • This paper proposes a current-fed type high frequency inverter using a soft switching technology Zero-Voltage-Switching to reduce turn on and off loss at the switching. The analysis of the proposed circuit was described by using normalized parameter and operating characteristics have been evaluated as to switching frequency and parameters. The theoretical results are in good agreement with the experimental ones. In the future the proposed circuit is considered to be useful for induction heating applications.

  • PDF