• International Journal of Highway Engineering
• /
• v.15 no.3
• /
• pp.159-167
• /
• 2013

PURPOSES: The purpose of this study is to develop an effectiveness analysis method of exclusive median bus lanes, which is necessary in order to improve operation efficiency of exclusive median bus lanes. METHODS : The operation characteristics of "signalized intersection including exclusive median bus lanes" and "normal signalized intersection" were investigated and the existing capacity analysis method was also reviewed to analyze the effectiveness of exclusive median bus lanes. Delay reduction of passengers using exclusive median bus lanes which can be considered as the benefit of exclusive median bus lanes and the number of people in buses were included in the proposed effectiveness analysis method. RESULTS : It was found that the proposed method expresses properly the effectiveness of exclusive median bus lanes through performing sensitivity analysis and analyzing with the real data of the number of people in buses and passenger cars. It was also found that the proposed method demonstrates the effectiveness that measure of effectiveness of signalized intersections is changed to "sec/person". CONCLUSIONS : It was concluded that the method is a proper effectiveness analysis method because it can reflect the benefit of passengers in buses.

• Journal of Korean Society of Transportation
• /
• v.28 no.1
• /
• pp.125-134
• /
• 2010

It is occurred bus arrival time errors when a bus arrives at a bus stop because of a variety of traffic condition such as traffic signal cycle, the time to get on and off a bus, a bus-only lane and so on. In this paper, bus delay time which is occurred as the result of traffic condition was estimated with Markov Chain process and bus arrival time at each bus stop was predicted with it. As the result of the study, it is confirmed to improve accuracy than the method of bus arrival time prediction with existing method (weighed moving average method) in case predicting bus arrival time using 7 by 7 and 9 by 9 matrixes.

• International Journal of Highway Engineering
• /
• v.15 no.2
• /
• pp.159-167
• /
• 2013

PURPOSES : In this study, the effects of when median exclusive bus lanes were applied to Daejeon trunk road (Wolpyeng crossway~Seodaejeon crossway, 6.3km) and (Daeduck Bridge 4~Kyeryong 4, 2.6km) by Microscopic Simulation VISSIM (5.0) was studied. The median exclusive bus lanes are one of the measures of transportation system manage techniques that can especially improve the efficiency of public transportation facilities. METHODS : According to the analysis of VISSIM on the Gyerong mainroad and Daedeok mainroad, when the median exclusive bus lanes were applied unlike when the roadside bus-only lanes were applied, the average travel speed of vehicles decreased but the average delay time and travel time increased. This arised from the changes in the geometric structure of the road which occurred the reduction of vehicle lane in the center of the road. RESULTS : In the case of bus, on the other hand, the average travel speed increased but the average delay time and travel time decreased. This is because the problems such as illegal parking and stopping, secondary road in out vehicle, and conflict of intersection right turn that roadside bus-only lanes occurred was solved. CONCLUSIONS : Although the introduction of median exclusive bus lanes will have a negative effect on general traffic flow due to the aggravation of travel, decrease of passenger car usage will lead to decrease of traffic volume. Therefore, smooth vehicle travel is expected.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.17-31
• /
• 2003

This study is about throughput analysis of the shared right turn lane at signalized intersection with lane width change. It is expected that the increased width of the right turn shared lane causes to increase the volume of right turn on red(RTOR) In this study, the throughput computation is designed to take into account the lost time which is caused by the blocked right turn due to the stop of through traffic. The saturation flow rate of right turn using the rest of lane after through traffic stops is included as well. Results show that the different RTOR volume levels due to the various shared lane width leads to a difference in throughput. For the shared right turn lanes. throughput capacity for various lane widths is bigger than that of the KHCM as much as from 1.1 to 2.1 times.

• International Journal of Highway Engineering
• /
• v.15 no.6
• /
• pp.135-141
• /
• 2013

PURPOSES : The lack of details of design guideline for zig-zag shaped section approaching central bus stop leads an traffic accident proneness. So, this study analysed the geometric elements of central bus stop area in terms of vehicle dynamics and suggested design alternatives. METHODS : The study analysed a dynamic behaviour of bus moving in and out of zig-zag shaped section using Auto-Turn under scenarios. Based upon dynamic analysis, the study found out the width of overtaking lane is the most influential factor for a safe moving at zig-zag alignment. RESULTS : The width of overtaking lane at design speed of 40, 50, and 60 km/h respectively was suggested given taper ratio of 1 to 10 required for Bus Rapid Transit (BRT), and the lane width is not wider than 4.0m which possibly makes two vehicles using the same lane. Also, the width of overtaking lane which mitigates the taper ratio was suggested with the same restriction about the maximum lane width. CONCLUSIONS : The results of the study can be used to prepare a design guideline on zig-zag shaped alignment of central bus exclusive lanes. The more stable moving is expected by applying the design alternatives suggested, therefore the lower rate of traffic crashes at the vicinity of central bus stops.

• International Journal of Highway Engineering
• /
• v.15 no.5
• /
• pp.135-144
• /
• 2013

PURPOSES : The purpose of this paper is to develop a methodology to estimate level of service of arterial including Exclusive Median Bus Lanes. METHODS : On 6 Exclusive Median Bus Lanes routes in Seoul, bus travel time and number of bus-stop per km were investigated. Also whether or not passing lane exists at bus-stop was checked. Based on the data from sites, bus travel time was estimated according to length of segment, number of bus-stop per km and whether or not passing lane exists at bus-stop. RESULTS : A bus travel time table was developed according to length of segment, number of bus-stop per km and whether or not passing lane exists at bus-stop. After bus travel speed and passenger car travel speed is estimated based on each travel time table and length of segment, two speeds are combined with weighted average speed using traffic volume of each lane group. Then weighted average speed is a measure of effectiveness of arterial including Exclusive Median Bus Lanes. CONCLUSIONS : It can be concluded that the proposed methodology can estimate level of service of arterial including Exclusive Median Bus Lanes considering the operation characteristics of Exclusive Median Bus Lanes.

• Journal of Korean Society of Transportation
• /
• v.20 no.7
• /
• pp.31-41
• /
• 2002

국내의 도로용량편람에 근거한 좌회전 신호의 선택기준은 4방향 접근로 각각의 방향별 교통량, 좌회전 전용차로의 유무, 차로수 등의 수많은 요인들을 통해 결정된다. 이 요인들은 각각의 특성에 따라 좌회전 신호의 선택기준에 미치는 영향력이 다르며 그 영향력의 크기에 따라 변수를 결정해야 한다. 그러나 국내에서 사용되고 있는 대부분의 좌회전 신호의 선택기준은 이러한 검토 없이 해당도로의 한 방향 좌회전 교통량과 이와 마주보며 진행하는 직진 교통량, 차로수만을 기준으로 결정되고 있다. 따라서 본 연구는 국내 도로용량편람의 알고리즘을 이용하여 좌회전 신호의 선택기준에 영향을 주는 주요 요인을 밝히고, 이 결과를 이용하여 임계좌회전 교통량 (비 보호좌회전 신호로 신호교차로의 운영효율을 극대화 할 수 있는 최대 좌회전 교통량)을 제시함으로서 비 보호 좌회전 준거를 설정하고자 하였다. 본 연구에 의한 결과는 다음과 같다. 첫째, 좌회전 신호의 선택기준에 영향을 주는 주요요인은 해당도로의 좌회전 교통량, 대향직진 교통량, 차로수, 교차도로의 교통량과 차로수이며, 이 요인들 중에서 해당도로의 차로수가 좌회전 신호의 선택기준에 가장 큰 영향을 미치는 것으로 분석되었다. 그러나, 비 보호좌회전은 일반적으로 2차로에서 운영되므로 보편적인 상황에서의 비 보호좌회전 신호의 선택기준은 해당도로의 좌회전 교통량. 대향직진 교통량 및 교차도로의 교통량에 좌우된다. 둘째, 대향직진 교통량이 커질수록 임계좌회전 교통량은 감소하는 것으로 분석되었다. 셋째. 교차도로의 교통량이 커질수록 임계좌회전 교통량은 감소하는 것으로 분석되었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.317-319
• /
• 2021

In Korea, an intelligent transportation system(ITS) is established to efficiently operate traffic congestion on roads and is being used for traffic information collection and speed control systems. Currently, designated and dedicated lanes are in place to ensure traffic circulation and traffic safety, and systematic and accurate illegal vehicle crackdown systems with artificial intelligence technology are needed. In this study, we propose a vehicle number recognition model that can improve the efficiency of the traffic of designated vehicles. By applying computer vision technology, we are going to identify three-lane and four-lane multi-lane roads in real time and detect vehicle numbers by car to suggest ways to crack down on vehicles that violate the designated lane system.

• Journal of Korean Society of Transportation
• /
• v.24 no.1 s.87
• /
• pp.109-120
• /
• 2006

Since the 1st of July, 2004, the public transport system of the Seoul metropolitan area has been rearranged. In the new system, bus lines are divided into 4 classes-wide area, arterial road, branch, and rotation lines with renewed fare system based on the total distance travelled. Since central control center known as the Bus Management System (BMS) integrates the entire system operation. it now becomes feasible to collect travel information and provide it to the users scientifically and systematically. The Purpose of this study is to forecast transit travel time using real-time traffic data coming from both buses and subway. This is significant contribution since provision of real-time transit information and easy access to it would most likely boost the use of mass transit system, alleviating roadway congestion in the metropolitan area.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.17-25
• /
• 2009

The goal of this study is to develop Logistic regression model by accident location(entry section, exit section, inside intersection and pedestrian crossing section). Based on the accident data of Chungbuk Provincial Police Agency(2004$\sim$2005) and the field survey data, the geometric elements, environmental factor and others related to traffic accidents were analyzed. Developed models are all analyzed to be statistically significant(chi-square p=0.000, Nagelkerke $R^2$=0.363$\sim$0.819). The models show that the common factors of accidents are the traffic volume(ADT), distant of crossing and exclusive left turn lane, and the specific factors are the minor traffic volume(inside intersection model) and U-turn of main road(pedestrian crossing model). Hosmer & Loineshow tests are evaluated to be statistically significant(p$\geqq$0.05) except the entry section model. The correct classification rates are also analyzed to be very predictable(more than 73.9% to all models).