• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.266-268
• /
• 2008

신호잡음 제거 및 대역 선택용으로 사용되고 있는 필터의 특성을 보정하기 위한 전압 안정화 회로를 설계하기 위한 방법으로 전류비교 방식의 전압안정화 회로를 설계하였다. 제안된 전류비교 방식의 전압안정화 회로는 부가적인 회로가 추가로 필요하지 않아 칩 면적을 최소화 할 수 있고, 저전력 특성을 만족시키는 전류 비교 방식을 이용하여 원하고자 하는 각각의 채널 선택에 따른 제어 전압을 안정적으로 공급함으로써 주파수 특성을 유지시킬 수 있다. 설계된 전류비교방식을 통하여 전류를 감지 및 비교하여 자동적으로 보상하고 원하는 채널에 따라 각각의 제어 전압을 일정하게 유지될 수 있음을 시뮬레이션 결과를 통하여 확인하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1172-1177
• /
• 2008

To compensate voltage error of the channel selecting filter, a current comparison type voltage tuning circuit is designed. Because the proposed current comparison type voltage tuning circuit is not need to attach another subcircuit, the chip size can be reduced, therefore the proposed circuit is very useful in the low voltage and low power channel filter. We used three channels including bluetooth communication system as application circuits of the proposed tuning circuit. As the results of HSPICE simulation using $0.18{\mu}m$ CMOS technology verify that the proposed tuning circuit respectively can be operated in $12{\mu}s$, $13{\mu}s$ and $15{\mu}s$ in three channel.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.11
• /
• pp.1641-1646
• /
• 2013

Control voltage for baseband channel selection filter to select one of communication channels can be easily fluctuated according to external noise or variation of fabrication. In this paper, we design a voltage regulator with small chip area to keep control voltage constantly using current comparative method. Cut-off frequency of channel selection filter is automatically controlled by detecting current flow using the proposed voltage regulator.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.423-426
• /
• 2001

In this paper, an electronic step-down transformer with output voltage stabilization characteristics is presented. The proposed electronic transformer has some advantages and features as follows: 1) It has 40 % weights lighter than that of commercial magnetic transformer, 2) It has output voltage stabilization characteristic with regulated output voltage over input variations, 3) It cab be operated as circuit breaker in the case of emergency, 4) It can be operated with so called soft starting function. Moreover, the electronic transformer may have stand-by power cutoff function and act as distortion compensator. This paper show the circuit diagram and present its features through various PSPICE simulations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.2
• /
• pp.309-313
• /
• 2001

In this paper, a multifunctional three-phase electronic step-down transformer with output voltage stabilization characteristics is presented for custom power applications. The proposed electronic transformer has some advantages and features as follows: 1) It has 40 % weights lighter than that of commercial magnetic transformer, 2) It has output voltage stabilization characteristic with regulated output voltage over input variations, 3) It cab be operated as circuit breaker in the case of emergency, 4) It can be operated with so called soft starting function. Moreover, the electronic transformer may have stand-by power cutoff function and act as distortion compensator. This paper show the circuit diagram and present its features through various PSPICE simulations.

• Proceedings of the Optical Society of Korea Conference
• /
• 1988.06a
• /
• pp.37-40
• /
• 1988

보조전극을 사용하여 전기방전을 궤환 조절하여 연속출력 탄산가스 출력을 안정화하였다. 보조전극은 양극과 접지되어 있는 음극사이에서 음그근처에 설치하였으며 레이저 출력을 HgCdTe-detector로 측정하여 레이저 출력의 요동에 따라 보조전극에 인가되는 전압이 변화되도록 하였다. 보조전극을 사용하여 레이저 출력을 안정화시킨 결과 레이저 출력의 요동은 안정화하지 않았을때의 레이저출력 요동의 1/10 이하로 감소하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.430-434
• /
• 2002

Recently, lot of researchers pay attention to custom power equipments for power quality improvement, especially, voltage stabilization equipment using PWM AC-AC converter. In this paper, voltage regulation system with PWM Buck-Boost AC-AC converter is proposed and then the system is modelled and analyzed by using of Circuit DQ transformation whereby steady state characteristics such as equations for voltage gain and power factor are obtained. The equations become guide line for system design by showing the effect on system operations. Finally, some experiment will show validity of analysis.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.5
• /
• pp.73-80
• /
• 2013

Recently, Li-ion battery is regarded as a potential energy storage device in the lime light and it can supply power to the satellite very effectively during eclipse. Because it has better features as high voltage range, large capacity and small volume than any other battery. Generally, multi cells are connected in series to use Li-ion batteries in satellite application. Since the internal resistance of cells is different each other, voltage in some cells can be overcharged or undercharged, so capacity of the cell is reduced and the life of whole battery pack is decreased. Therefore, a voltage balancing circuit with Fly-back converter is proposed and the voltage equalization of each cell is verified the prototype in this paper.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.2
• /
• pp.187-193
• /
• 2004

For a power source of usual electronic devices such as PDA, smart phone, UPS and electric vehicle, the battery made of serially connected multiple cells is generally used. In this case, if there are some unbalanced among cell voltages, the total lifetime and the total capacity of the battery are limited to a lower value. To maintain a balanced condition in cells, an effective method of regulating the cell voltage in indispensable. In this paper, we propose the design of a balancing circuit for electronic appliances. The balancing system was controlled by a micro-controller which enables to implement the balancing action during charging period. Proposed method has been verified by the experiment using the charger and recorder. The experimental results show that the individual battery equalization can improve battery capacity and battery lifetime and performance through an extended operational time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1514-1519
• /
• 2003

This paper presents modeling and analysis of static and dynamic characteristics in three phase PWM Boost AC-AC converter used for input voltage sag compensation of custom power. Especially, using circuit DQ transformation technique, an equivalent circuit in fundamental frequency domain is obtained which has all the system characteristics. Moreover, voltage gain and input power factor is analytically induced and linearized state equation at the specific operating point is given. Finally, PSIM simulation results show the validity of the Nosed modelling and analyses.