• Title/Summary/Keyword: 전수층

Search Result 40, Processing Time 0.032 seconds

Fundamental Pyrolysis Studies with Molten Metal Fluidized Bed System (Molten metal 유동층을 이용한 열분해 기초 실험)

  • Moon, Jihong;Jeon, Suji;Hwang, Jungho;Bang, Byungryeul;Lee, Uendo
    • 한국연소학회:학술대회논문집
    • /
    • 2014.11a
    • /
    • pp.161-164
    • /
    • 2014
  • The feasibility of a molten metal as a bed material of a pyrolysis system was investigated. The molten metal has various advantages such as high thermal conductivity, wide operating range and low viscosity. Tin was selected since its physical characteristics are suitable for the purpose. As a results, it was found that pyrolytic oil yield and reaction rate were significantly enhanced with the molten Tin. In addition, oxygen component of the product oil was decreased due to Tin oxidation.

  • PDF

동중국해 북부해역 수온, 염분의 분포 변동 특성

  • Jang, Lee-Hyeon;Kim, Sang-U;Go, U-Jin;Geleekko, Yamada;Seo, Yeong-Sang
    • Proceedings of the Korean Environmental Sciences Society Conference
    • /
    • 2007.05a
    • /
    • pp.331-335
    • /
    • 2007
  • 본 연구에서는 장기간의 현장관측 수온, 염분자료를 분석하여 동중국해 북부해역에서 계절별 수온, 염분의 변동 특성을 조사하였다. 표층의 경우 춘계 수온상승에는 공간적인 차이가 있다. 또한 서부해역($125^{\circ}E$ 이서)에서는 32 psu 이하의 저염 분포가 나타나고 제주 남서해역에서 33psu 이하의 저염수가 춘계부터 제주 주변해역으로 확장한다. 하계 표층염분은 $28.0{\sim}32.4$ psu로 연중 최저값은 보이며, 전해역 표층 염분이 33psu 이하로 저염의 양자강 희석수가 하계에 동중국해 북부해역 표층 전체에 영향을 미치고 있다. 추계의 표층수온과 염분은 동고서저형의 수평분포를 나타낸다. 수온 하강은 서부해역인 대륙 연안수역이 동부의 대마난류수역에 비해 크고, 서부해역에서 33psu 이하의 설상형 저염분포가 이시기에 남동쪽으로 관입되는 형태로 나타나 동계의 남북방향의 염분전선과 이어지게 된다. 연직해황의 경우 동계 수온과 염분은 활발한 대륙작용에 의해 전수층에서 균일한 분포를 나타내며, 대륙연안수역에서는 저온, 저염($12^{\circ}C$, 33psu 이하)의 분포를, 대마난류수역에서는 고온, 고염($16^{\circ}C$, 34.4psu 이상)분포의 지역적인 특성으로 구별된다. 춘계에는 수온약층이 형성되며, 저층에는 동계에 형성되어 대륙연안수와 외양수 사이에 고립된 $13^{\circ}C$ 이하의 냉수괴가 분포한다. 염분은 표층 저염화가 시작된다. 하계에는 양자강 유출수의 영향으로 전해역 표층에서는 30psu 이하로 전해역에서 저염화 양상이 나타나며, 표층에서 30m 층까지 매우 강한 염분약층이 형성된다. 추계 수온 엽문은 균일한 연직수온분포가 나타나며, 동부해역에서는 수심 $75{\sim}100m$사이에서 수온, 염분약층이 형성된다. 동중국해의 수괴는 뚜렷한 계절 변동을 보이며, 대마난류수역인 동부해역에서는 수괴 계절변동의 요인으로 계절 수온변동이 지배적이고, 수온변동은 춘계와 하계 사이에 가장 크다. 중앙부와 대륙연안역인 서부해역에서는 수괴 계절변동에 수온외에 염분 변화가 주요한 요인으로 작용하며, 염분은 하계와 추계 사이에 가장 변동이 크게 나타난다. 즉, 동중국해의 수괴변동에는 변동요인에 따른 공간적인 차이가 있으며, 수괴변화 특성으로 동중국해는 수온변화가 수괴변동에 직접요인이 되는 동부 대마난류수역과 염분변화가 수괴변동의 직접요인인 서부의 대륙연안수역으로 구분된다.

  • PDF

Water Quality Management by Reservoir Discharge Control through Selective Withdrawal (선택취수를 이용한 댐하류 하천의 수질관리)

  • Kim Young Do;Yi Yong-Kon;Ko Ick Hwan;Kim Woo Gu
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2005.05b
    • /
    • pp.454-458
    • /
    • 2005
  • 여름철 집중강우시 유입되는 고탁수층은 저수지의 밀도성층으로 인하여 표수층 하부에 위치하며, 이를 적기에 배제하지 않을 경우에는 수평방향의 확산현상과 연직방향의 전도현상으로 인해 저수지 전역에 분포하게 되어, 탁수현상의 장기화를 유발한다. 일본 사메우라댐의 경우에는 1977년 9월 태풍 17호에 의한 집중호우로 대량의 고탁수가 유입되어 하류하천으로의 댐 방류수의 고탁도현상이 장기간 지속된 바 있다. 이와 같은 탁수장기화에 대한 저수지내 대책의 하나로서 홍수유입후 탁도가 높은 물을 단기간동안 방류하고, 갈수기에는 탁도가 낮은 물을 방류하는 선택취수 개념이 제안된 바 있다. 국내의 임하댐의 경우에도 2002년 태풍 '루사'와 2003년 태풍 '매미'로 인해 발생한 탁수가 전도현상을 거치며 저수지내 전수층에 확산됨으로써 댐방류수의 고탁도현상이 장기화된바 있다. 이로 인하여 댐하류에 위치한 안동시 용상정수장의 동절기 정수처리 장애로 2003년 11월이후 약 160여일동안 댐방류가 중단된 바 있다. 임하댐의 경우에도 탁수장기화에 대한 대책으로서 홍수기 고탁수층을 우선배제한 후, 저수지내에 유입되는 청수을 담수함으로써 이를 방지할 수 있다. 이러한 선택취수 기법은 동일한 수리동역학적 개념을 적용하여 하류하천의 냉해문제를 대비하기 위한 방법으로 표층의 온수를 선택방류하는 데에도 이용될 수 있다. 이와 같은 선택취수를 효율적으로 수행하기 위해서는 취수시설에 접근하는 밀도흐름을 정확하게 이해하고 있어야 한다. 또한 취수탑 인근에서의 온도 및 탁도 등의 연직분포를 실시간으로 파악할 수 있는 자동수질측정시스템이 구축되어 있어야 한다. 현재 임하댐의 경우, 하류하천의 수질을 고려한 효율적인 탁수배제를 위하여 상류 유입부 2개소, 발전취수탑 전면 1개소, 조정지댐 1개소 등 총 4개의 자동수질측정시스템이 설치되어 탁도와 온도가 실시간으로 모니터링되고 있으며, 향후 강우시 저수지에서의 밀도흐름을 보다 정밀하게 모니터링하기 위하여 저수지내 4개의 주요지점에 추가적으로 설치될 예정이다. 이와 같은 자동측정시스템과 더불어 주기적인 세부 수질조사를 실시하면 저수지내의 온도성층 변화와 탁수층 분포를 매우 정확하게 파악할 수 있으며, 호소의 수질모형과 연계하여 강우시 탁수 도달시간과 탁수량을 사전에 예측할 수도 있다. 또한 이와 같은 기초적인 정보를 바탕으로 하류하천의 탁수 피해를 최소화할 수 있는 선택취수탑의 운영방안을 수립할 수 있다 본 연구에서는 이를 위해 선택취수탑 주위의 성층흐름을 기존의 실험자료와 수치해석을 통하여 분석하였고, 온도성층구조나 취수구의 위치변화에 따른 방류수 수질특성을 조사하였다.

  • PDF

Distribution Characteristics of Fish Schools in the Yellow Sea and the East China Sea in the Spring of 1997 (1997 년 춘계의 동중국해 및 황해에 대한 어군의 분포특성)

  • Lee, Dae-Jae
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.38 no.3
    • /
    • pp.241-248
    • /
    • 2002
  • The combined hydroacoustic and demersal trawl surveys to investigate the distribution characteristics of fish schools in the Yellow Sea and the East China Sea were carried out during the spring of 1997 by the training ship "Nagasaki Maru" of Nagasaki University. Fish samples were collected by bottom trawling from 9 trawl stations randomly selected in the survey area, and the species and length compositions of trawl catches are examined. Hydroacoustic data were collected by using a Furuno FQ-50 scientific echo sounder operating at 50KHz and the data stored in field were later processed in the laboratory. The results obtained can be summarized as follows :1. In the 9 trawl surveys conducted in the Yellow Sea and the East China Sea, 78 species including 80 species of fishes, 4 species of Cephalopoda and 6 species of Crustacea, were identified. The most abundant species in these stations were swimming crab(Portunus trituberculatus), Japanese horse mackere(Trachurus japonicus), redlip croaker(Larimichthys polyactis) and the catch per one hour in each station ranged 7.7 to 182.5 kg/hour. 2. The mean volume backscattering strength for the entire water column and the bottom layer of the 0-10 m from bottom friction were -74.6 ㏈ and -68.2 ㏈, respectively. That is, the mean volume backscattering strength for the bottom layer was 6.4 ㏈ higher than that for the entire water column 3. In the surveys during the spring of 1997, the geographical distribution characteristics of fish schools suggests a trend of decreasing fish abundance toward the coast area of Korea and the highest demersal concentrations appeared in waters between the Cheju Island and the Tsushima Island 4. The distribution density of fish school in the East China Sea and Yellow Sea during the 1997 acoustic survey were estimated to be 6.65$\times$10$^{-5}$ kg/㎥ in the entire water column and 2.86$\times$l0$^{-4}$ kg/㎥ in the bottom layer, respectively.pectively.

Stable lateral-shearing interferometer for in-line inspection of aspheric pick-up lenses (생산 라인에서의 광 Pick-up용 비구면 대물 렌즈 측정을 위한 안정된 층밀리기 간섭계)

  • 조우종;김병창;김승우
    • Korean Journal of Optics and Photonics
    • /
    • v.8 no.3
    • /
    • pp.189-193
    • /
    • 1997
  • Aspheric pick-up lenses are increasingly used in consumer products such as computer and multimedia, as their mass production has become possible owing to the injection molding process. However still much work needs to be done for more effective manufacture of aspheric lenses, one area of which is the in-line inspection of produced lenses. In this paper, we present a lateral-shearing interferometer that has specially been designed to have a high immunity to external vibration and atmospheric disturbance. The interferometer comprises four prisms. They are directly attached to each other using an immersion oil so that relative sliding motions between the prisms are allowed. Their relative displacement can readily generate necessary lateral-shearing and phase-shifting to determine the wavefront of the beam collimated by the lens under inspection. A special phase-measuring algorithm of arbitrary-bucket is adopted to compensate the phase-shifting error caused by the thickness reduction in the immersion oil. Zernike polynomial fitting has done for determinating quantitative aberration of aspheric pick-up lenses. The interferometer built in this work is robust to external mechanical vibration and atmospheric disturbance so that experimental results show that it has a repeatability of less than λ/100.

  • PDF

Free Vibration Analysis of a Two-Layered Structure - Formulation by the Transfer Infiuence Coefficient Method - (2층 구조물의 자유진동해석 - 전달영향계수법에 의한 정식화 -)

  • Mun, Deok-Hong;Yeo, Dong-Jun;Kim, Won-Cheol
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.27 no.4
    • /
    • pp.303-312
    • /
    • 1991
  • This paper describes the general formulation for the in-plane flexural free vibration analysis of two layered structure by the transfer influence coefficient method. The structure is regared as a distributed mass system with lumped mass and inertia moments, massless linear and rotational springs, and joints elements of releases and rolls at which the displacements are discontinuous in each layer. The results of the simple numerical examples on a personal computer demonstrate the validity of the present method, that is, the numerical high accuracy, the high speed, the flexibility for programming of the present algorithm, compared with the transfer matrix method.

  • PDF

Seepage-Advection-Dispersion Numerical Analysis of Offshore Rubble Mound Revetment Landfill Under Transient Flow (비정상류 조건에서 경사식호안매립장에 대한 침투이류 분산해석)

  • Hwang, Woong-Ki;Kim, Hyang-Eun;Kim, Tae-Hyung
    • Journal of the Korean Geosynthetics Society
    • /
    • v.19 no.4
    • /
    • pp.1-9
    • /
    • 2020
  • This study analyzes contaminant movement under transient flow in a rubble mound revetment offshore waste landfill barrier system that prevents contaminant runoff. The barrier system consists of bottom layer and side barrier. For the bottom layer system, impermeable clay layer is used. For the side barrier system, the HDPE barrier sheet (primary element) plays the main role, and the intermediate protection layer (supplementary element) is responsible for the barrier. Seepage, advection, dispersion numerical analysis was carried out using SEEP / W and CTRAN / W programs. As a result, under abnormal conditions considering the fluctuation in tidal range, the volume and direction of the flow velocity vector of the pore water change with time and the dispersion concentration of the contaminant changes. When comparing the case of 2 m tidal range and 8 m tidal range, the larger the tide value, the higher the concentration of contaminant under abnormal conditions. It was found that the rate of change of the concentration of the contaminant changed depending on the change in the tidal range, and as a result, the outflow of the pollutant was smaller than that in the steady flow state.

On the Viscous Flow Around Breaking Waves Generated by a Submerged Cylinder(Part 2 : Aspects of Viscous Flow) (몰수실린더에 의하여 생성되는 쇄파주의 점성유동의 고찰(제2부: 점성유동특성))

  • B.S. Hyun;Y.H. Shin
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.37 no.1
    • /
    • pp.91-98
    • /
    • 2000
  • The present paper is Part 2 of three-part paper for an experimental study on breaking waves generated by a submerged cylinder. Measurements of velocity and head loss profiles at the wakes of cylinder and breaker as well as the turbulent intensities in breaking region were made to elucidate the viscous aspects of breaking waves. Their mutual correlation is also investigated. It is found that the head loss profile is an excellent indicator of the strength and extent of breaker. Very high turbulent intensities measured at and just downstream of the breaker indicate the consequence of energy transfer of wave breaking into turbulence.

  • PDF

A Study of Alkali Metal Vapor Adsorption Behavior by Using Pressurized Reactor (가압반응기를 이용한 알칼리금속증기 흡착특성에 관한 연구)

  • 전수한;최병철;김형택
    • Journal of Energy Engineering
    • /
    • v.11 no.2
    • /
    • pp.114-121
    • /
    • 2002
  • Alkali metal compounds existed in original coal or sorbents are exhausted as vapor or small particle at the outlet of combustor when operating PFBC power plant. These compounds can be removed with dust removal equipment, but total generation efficiency will be decreased because of lower operating temperature of dust removal equipment. Alkali metal contained in vapor phase is initially deposited onto turbine blade results in serious corrosion. The concentration of alkali vapor in the PFBC flue gas is 20∼40 ppm which is dependent on mineral characteristics and composition as well as operating condition of PFBC. However, the allowance limit of alkali metal vapor is assigned as less than 50 ppb for gas turbine when coal or oil is used as fuel. Therefore, alkali metal vapor in PFBC or IGCC process should be removed by solid sorbents to prevent corrosion of turbine blade and improve plant efficiency. In the present investigation, powder of Bauxite, Kaolinite and Limestone is used in the preparation of cylinder-type pellet which is inserted into the pressurized alkali removal reactor for the alkali absorption experiment. Experimental results showed that the alkali removal efficiency in the order of Bauxite, Kaolinite and Limestone. Alkali vapor removal efficiency is related with reaction temperature, porosity of pellet and alkali vapor concentration of flue gas.

Analysis of groundwater flow regime in Jincheon (진천지역 지하수 유동체계 분석)

  • Chung, Il-Moon;Kim, Ji-Tae;Lee, Deok-Su;Choi, Sung-Kyu
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2011.05a
    • /
    • pp.236-236
    • /
    • 2011
  • 진천지역의 지하수 유동체계를 분석하기 위해 진천지역 내 530개 공의 지하수위를 1년간 관측하였다. 이중 360개 공에서는 분기별로 한번씩 총 4회, 130개 공에서는 월1회씩 총 12회 지하수위를 관측하였으며, 40개 공에 대해서는 1시간 간격으로 자동관측을 실시하였다. 관측결과를 수집하여 지하수위의 변동특성, 지하수위 분포, 지하수 심도분포 등을 실시하였으며, 이와 같은 지하수위 분석 결과를 바탕으로 지하수 유동체계를 분석하였다. 조사지역의 평수기 지하수위 분포에 대해 수리학적인 접근법(hydraulic approach) 및 동수역학적 접근법(hydrodynamic approach)에 근거하여 수리수두(hydraulic head) 및 전수두(total head)를 분석하여 2차원 및 3차원 수리경사도를 작성하였다. 이러한 지하수위 분포에 따른 분석 성과와 지형 및 수문지질을 고려하여 함양 및 배출지역을 분류하였으며, 이와 함께 기분석된 지하수위 등고선에 따른 유선망도를 작성하였다. 지하수는 지하수위의 표고 및 압력에 따른 위치 에너지 차에 의하여 대수층 매질을 통하여 유동하며 수두가 높은 곳에서 낮은 곳으로 일정한 수리경사를 갖고 지하수 등수위선에 연직 방향으로 형성된 유선을 따라 이동한다. 따라서 지하수의 유동방향은 지하수 수리경사 분석이 이루어진 8개 방향의 지하수위 경사 중 최대경사를 갖는 방향으로 지하수 유동이 발생하므로, 이를 지하수위 유동방향으로 결정하였다. 이와 같이 분류된 지하수 함양 중간 및 배출 지역과 지하수의 함양과 배출의 양적인 측면에 서 유동체계의 규모를 고려하여 조사 지역을 8단계로 구분하였다. 또한 조사지역의 지하수 유동체계를 종합적으로 규명하기 위하여 기 분석한 조사지역의 지하수위 등고선, 지하수위 등심도선, 지하수 수리경사, 지하수 유동방향 및 지하수 함양-배출체계와 지형기복, 그리고 주요 하천 등의 제반 요소를 중첩 분석하여 종합적으로 규명하고, 그 결과를 지하수 유동체계도로 작성하였다. 지하수 유동체계 분석결과는 수문지질 평가와 오염취약성 평가 및 지하수 관리 방안 수립에 활용될 수 있을 것으로 기대된다.

  • PDF