• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1994-1995
• /
• 2007

본 논문에서는 가로등 제어를 위한 전력선 통신 프로토콜을 OSI 7계층을 바탕으로 설계하고, 실제 적용해 봄으로써 그 실용성을 입증한다. 그러나 전력선 채널의 상태가 좋지 않으면 멀리 있는 모뎀까지의 전송 확률이 떨어짐을 확인하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.1
• /
• pp.177-182
• /
• 2014

In this paper, we propose an energy efficient sink node based MAC protocol for Wireless Sensor Networks (WSNs). The proposed sink node-based MAC (SB-MAC) protocol uses a RB(rapid beacon) frame to save sender's energy consumption and to reduce transmission delay. The RB frame is a modified IEEE 802.15.4 beacon frame. The RB frame contains the length of the sender nodes data. Using this information other nodes except sender and receiver nodes can be stay sleep mode long time to reduce energy consumption. Results have shown that the SB-MAC protocol outperformed other protocols like X-MAC and RI-MAC in terms of packet delivery delay and energy consumption. The SB-MAC protocol is especially energy efficient for the networks with one sink node and many senders.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.141-149
• /
• 2013

IETF 6LoWPAN standard technique has been studied in IoT environment to support the IPv6 packet communication. 6LoWPAN protocol for transmission of packets mainly in the AODV routing protocol and a variety of extended techniques have been investigated. In particular, consisting of nodes with limited resources in a network error occurs when the 6LoWPAN reliable data transfer and fast routing method is needed. To this end, in this paper, we propose resilient routing protocol and extension of IETF LOAD algorithm, for optimal recovery path, More specifically, the optimal recovery path setup algorithm, signal flow, and detailed protocols for the verification of the reliability of packet transmission mathematical model is presented. The proposed protocol techniques to analyze the performance of the NS-3 performance through the simulation results that is end-to-end delay, throughput, packet delivery fraction and control packet overhead demonstrated excellence in comparison with existing LOAD.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7A
• /
• pp.485-492
• /
• 2003

This paper proposes a transmission probability control scheme for guaranteeing fair packet transmissions in CDMA slotted ALOHA system. In CDMA slotted ALOHA system, the packets transmitted in the same slot act as multiple access interference, so that unsuccessful packet transmissions are caused entirely by multiple access interference. Therefore, in order to maximize the system throughput, the number of simultaneously transmitted packets should be kept at a proper level. In the proposed scheme, the base station calculates the packet transmission probability of mobile stations in the next slot according to the offered load and then broadcasts this probability to all the mobile stations. Mobile stations, which have a packet to transmit, attempt to transmit packet with the received probability. Simulation results show that the proposed scheme can offer better system throughput and average delay than the conventional scheme, and guarantee a good fairness among all mobile stations regardless of the offered load.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.5
• /
• pp.116-124
• /
• 2016

This paper proposes a medium access control protocol for collision detection and resolution when a large number of sensor nodes transmits data in vehicle. The proposed protocol selects a random collision detection (CD) slot after data transmission, suspends its transmission and senses the channel to check whether a collision occurs by the detection of both energy level and jam signal. The proposed scheme uses multiple CD phases and in each CD phase, colliding stations are filtered and only surviving stations compete again in the next CD phase; thus, the collision resolution probability significantly increases. Simulation results show that the proposed protocol using the multiple CD phases has significantly better throughput than the conventional protocol. In addition, according to the number of CD phases and the number of CD slots per phase, the throughput aspect of the proposed scheme is investigated and the optimal parameters are derived.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.11
• /
• pp.1081-1085
• /
• 2010

In the wireless sensor networks, power consumption and interference among the nodes can be reduced by using the transmission power control. Because link quality is changed by spatial and temporal effect, link failures are frequently occurred. In order to adapt to link quality variation, existing transmission power control schemes broadcast beacon messages periodically to neighbor nodes and control the transmission power dynamically. However, it can effect on the time and energy overhead according to period of transmission power control. In this paper, the dynamic method of transmission power control by the link quality variation and variable period are proposed. When a link quality is unstable, the control duty cycle is reduced and the link quality is agilely maintained. In contrast, when link quality is stable, the control period is increased and control overhead is decreased.

• Journal of KIISE:Information Networking
• /
• v.34 no.4
• /
• pp.269-275
• /
• 2007

Since being constructed without any infrastructure-based network, ad hoc network has been received much attention as a key technology for ubiquitous networks. Due to high bit error rate and dynamically changing network topology in ad hoc network, the routing protocol that provides stable multi-hop communication path is the one of the key issues to address. The previously proposed ad hoc routing protocols have their limitations on network overhead, stability, and scalability. In this paper, we consider hybrid wireless network, which can overcome shortcomings of ad hoc network, and propose a novel routing protocol called zone master-based routing protocol. We verify with computer simulations that the proposed routing protocol outperforms other existing routing protocols in the various wireless environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.4
• /
• pp.362-369
• /
• 2014

A railway SCADA system is a control systems that provide the trains with the electricity. A railway SCADA system sends commands to the RTUs(remote terminal unit) and then it gathers status information of the field devices in the RTUs or controls field devices connected with the RTUs. The RTU can controls input output modules directly, gathers the status information of the field devices connected with it, and send the information to the control center. In this way, a railway SCADA system monitors and controls the electricity power for running trains. The cyber attackers may use some vulnerabilities in the railway SCADA system software to attack critical infrastructures. The vulnerabilities might be created in the railway software development process. Therefore it need to detect and remove the vulnerabilities in the control system. In this paper we propose a new control protocol fuzzing method to detect the vulnerabilities in the DNP3 protocol based application running on VxWorks in RTU(Remote Terminal Unit) that is a component of the centralized traffic control system for railway. Debug-channel based fuzzing method is required to obtain process status information from the VxWorks.

• The KIPS Transactions:PartA
• /
• v.9A no.2
• /
• pp.207-216
• /
• 2002

This paper present a design and implementation of a distributed audio, Video stream service framework based on CORBA for efficient processing and control of audio/video stream. We design software components which support processing, control and transmission of audio/video streams as distributed objects. For optimization of stream transmission performance, we separate the transmission path of control data and media data. Distributed objects are defined by IDL and implemented using JAVA. And device dependent facilities like media capturing, playing and communication channels are implemented using JMF (Java Media Framework) components. We show a connection establishment and control procedure of streams communication. And for evaluation, we implement a test system and experiment a system performance. Our experiments show that test system has somewhat longer connection latency time compared to TCP connection establishment, but has optimized media transmission time compared to CORBA IIOP. Also test system show acceptable service quality of media transmission.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.567-570
• /
• 2017

산업공정에서 공정 정보처리의 극대화를 위하여 PLC, 로봇 등의 여러 프로그램식 단위제어기기가 네트워크로 연결되어 운영되고 있다. 대부분이 RS232C와 고유 장비의 전송절차에 의해 수행되어 왔지만, ISO 등에서는 반도체공정에 적용을 위한 SECS에 대한 프로토콜을 표준화하였다. 본 연구는 반도체 스퍼터 공정에 PLC, 로봇, 반송장치의 연결에 SECS-II를 적용하고, HSMS를 활용하여 TCP/IP와 Host를 연결하여 계층구조의 네트워크를 운영하였다. 전송 메세지 type을 stream과 function으로 나누어 송수신 확인과 데이터 전송절차를 설정하여 공정이 정상적으로 운영됨을 확인하였다.