• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.6 s.121
• /
• pp.680-688
• /
• 2007

Time domain closed-form analytical solutions to the coupled telegrapher's equations for the voltage and current on a lossless multiconductor transmission line are presented. The resulting expressions are obtained in the form of exact time domain propagators operating on the line voltage and current. Time domain numerical methods are developed and examples showing exceptionally accurate results are obtained for uniform and nonuniform; symmetric and asymmetric strip lines.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.1056-1064
• /
• 2010

This paper presents the approximate analysis method for the symmetric transmission line crossing the aperture in an backplane. The method of moments is used to determine the aperture impedance for the construction of the equivalent transmission line that the aperture impedance apply to the transmission line as the shunt impedance. As the results, the insertion loss increases at the specific frequency range for the impedance matching. In the case of the mismatching, we are confirmed to the insertion gain at the specific frequency. Also the horizontal length of the aperture affects to the transmission line better than vertical length. The measurement of the insertion loss is performed to verify the theoretical analysis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.2 s.117
• /
• pp.191-198
• /
• 2007

The electromagnetic coupling between transmission lines in PCB design can degrade the performance of equipment operations. The coupling phenomenon is caused by electromagnetic fields generated by the currents on the transmission lines and the risers. In this paper, an improved method of crosstalk analysis for bent coupled lines on a PCB is proposed and investigated. In the previous cascading method combined with circuit-concept approach, bent coupled lines are devided into sections and each section is represented by ABCD matrix and then they are cascaded. In the proposed method, the crosstalk of bent coupled lines is calculated by the modified circuit-concept approach, where the coupled region is not restricted to the region projected by a generator line on a receptor line but is the total length of receptor line in calculating the forcing terms. Finally, the accuracy of the proposed approach is verified by comparing the calculated results with the measured ones for several bent coupled-line examples.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1577_1578
• /
• 2009

본 논문은 Electro Magnetic Topology(EMT)를 이용하여 전자장과 전송선로의 커플링 영향에 대해 해석한다. 본 논문은 BLT 방정식을 이용하여 외부 소스에 의해 영향을 받는 전송 선로의 해를 주파수 영역에서 구하였다. 위의 해석 방법을 양단에 저항 부하가 있는 2선 전송 선로에 적용하여, 외부에서 평면파 소스가 인가되었을 때의 각 전송 선로 종단에서의 전류의 파형을 Mode Matching(MoM), Finite Difference Time Domain(FDTD) 결과와 비교함으로 정확성을 확인하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2052-2058
• /
• 2009

As the operating frequency of digital system increases and voltage swing decreases, an accurate and high speed analysis of PCB board becomes very important. Transmission matrix method, which use the multiple products of unit column matrix, is the highest speedy method in PCB board analysis. In this paper a new method to reduce the calculation time of PCB board impedances is proposed. First, in this method the eigenvalue and eigenvectors of the transmission matrix for unit column of PCB are calculated and the transmission matrix for the unit column is transformed using similarity transform to reduce the number of multiplication on the matrix elements. This method using the similarity transform can reduce the calculation time greatly comparing the previous method. The proposed method is applied to the 1.3 inch by 1.9 inch board and shows about 10 times reduction of calculation time. This method can be applied to the PCB design which needs a lots of repetitive calculation of board impedances.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.2
• /
• pp.91-102
• /
• 2002

불연속 전송선로를 해석하기 위한 유용한 방법으로서 유한요소법이나 공간도메인법등과 같은 주파수영역 해석법과 선로제작에 기초한 파라미터 측정법등이 사용된다. 시간영역의 유한차분법은 한번의 모의실험을 통해 주파수 의존적인 파라미터값을 구할수있어 불연속선로를 해석하는데 매우 효과적이다. 본 논문에서는 마이크로 스트립에 기초한 몇가지 형태의 2 포트 불연속 회로망 즉, 케스케이된 스텝 불연속 선로와 레이스트렉 지연선 및 단일 스터브 필터에 대한 정확한 모델링과 해석을 위하여 시간영역의 유한차분법의 적용방법이 논의된다. 2 포트 회로망으로 구성된 평면형 마이크로 스트립 불연속선로를 해석하기 위하여 일반적으로 분산 파라미터에 기초한 해석절차가 사용된다. 주파수 의존적인 분산 파라미터는 시간영역의 유한차분법에 의해 모니터된 입사, 반사 및 투과된 전압으로 부터 고속푸리에 변환을 통해 얻어지고, 또한 그 결과를 공간-스펙트랄 방법 및 모멘트 방법의 결과와 비교함으로써 시간영역의 유한차분법이 다양한 형태의 불연속 선로에 성공적으로 적용됨을 볼 수 있다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.1 no.1
• /
• pp.20-27
• /
• 1990

This paper presents an efficient method to estimate the induced current by the external electromagnetic wave when the line system is composed of cascaded transmission lines. To solve this phenomena, we apply the state variable method to the nonhomogeneous differential equation. This new method is the way of transferring the sources at a different point by the Ch- aracteristics of the transition matrix. Using this method, we investigate the characteristics of the induced power of the transmission line above the perfectly conducting ground plane.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.911-914
• /
• 2001

본 논문에서는 10Gigabit Ethernet 물리계충 전송 기술로서 IEEE 802.3 Higher Speed Study Group (HSSG)에서 검토했던 방법으로 선로부호화 방법이 있는데 그 중에서 국내 연구진에 의해 제안된 최소 대역폭 선로부호 MB810을 사용하여 10Gigabit Ethernet에서의 clock recovery 가능성에 대해 알아 본다. MB810 code를 사용하면 기존의 통신 시스템에서 필요로하는 대역폭을 반만 사용하여 전송할 수 있기 때문에 대역 효율이 좋아지나 이전의 일반적인 square law 방법으로는 clock recovery가 어렵다. 본 논문에서는 4th power law 방법을 사용했을때의 이론적인 해석과 시뮬레이션 결과를 보인다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.9
• /
• pp.1023-1029
• /
• 2007

In this paper, we propose the method to solve the BLT equations using Laguerre polynomials in time domain. The solution of BLT equations is obtained by recursive, differential and integral properties of Laguerre polynomials. The verification of the proposed method is tested by applying it to the two-wired transmission line with resistors and capacitors, which is illuminated by the electromagnetic plane wave pulse. And the result is compared with the corresponding transient responses obtained from inverse fast Fourier transform(IFFT) of the frequency domain solutions of BLT equations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.8
• /
• pp.730-739
• /
• 2015

In this paper, a wideband circular polarizer operating in the frequency range of 6~18 GHz is designed and fabricated using a multilayer structure with meanderlines. A T matrix expression for the unit structure, which consists of meanderline, dielectric substrate and spacer, was derived using the boundary value solution. A proposed meanderline structure was modeled as an array of unit meanderline cell in order to apply the waveguide model with PEC and PMC boundary conditions. The calculation procedures to obtain an equivalent susceptance of the unit meanderline cell using HFSS was also suggested. Using a hybrid method, which combines the T matrix with the HFSS results, and cut-and-try method, a wideband circular polarizer with low insertion loss and good AR performance was designed. The fabricated polarizer has the return loss less than -10 dB within 92 % bandwidth, the average insertion loss less than -0.24 dB, and the average AR below 2.6 dB for full 3:1 bandwidth.