• Journal of Advanced Navigation Technology
• /
• v.13 no.4
• /
• pp.551-558
• /
• 2009

Most of clustering schemes focusing on the energy efficiency have only a cluster head in each cluster, thus the energy consumption of cluster head in a cluster can rapidly increase. To reduce the energy consumption, recently, the dual-layered clustering which is separated a cluster ranges into two parts, i.e., data aggregation layer and data transmission layer, based on a sensor equipped with geographical positioning system (GPS), was proposed. However, the logical regions existing within the dual-layered clustering range can not distinguish efficiently. This scheme leads to many messages collision and transmission delay among member nodes. In this paper, to solve these problems, we propose a separated dual-layered routing scheme using the position information and the cluster radius. Proposed scheme clearly distinguish the dual-layered clustering range and gets the balanced number of member nodes in each cluster. Therefore, the proposed routing scheme could prolong the overall network life time about 10% compared to the previous two layered clustering scheme and LEACH.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.1
• /
• pp.59-65
• /
• 2008

In security layer in the CDMA2000 1x EV-DO, a standard - C.S0024-a v2.0 is being accomplished under the project of 3GPP2(3rd Generation Partnership Project2). Therefore, a security device is needed to implement the security layer which is defined on the standard document for data transfer security between AT(Access Terminal) and AN(Access Network) on CDMA2000 1x EV-DO environment. This paper realizes the security layer system that can make safe and fast transfer of data between AT and AN. It could be applied to various platform environments by designing and implementing the Security Layer in the CDMA2000 1x EV-DO Security Layer to which applies C.S0024-A v2.0 of 3GPP2.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.3
• /
• pp.71-75
• /
• 2018

In this paper, we study the secrecy outage probability when using jammer in a relay system based on decode-and-forward. The jammer may be selected among the relays not selected to increase the security capacity in the physical layer so as to generate intentional noise. Jammer noise can equally interfere with the receiver and eavesdropper but can enhance the physical layer security by selecting an optimal jammer that makes the channel quality between the sender-eavesdropper links worse than the channel of the sender-receiver link. In this paper, we compute the theoretical formula of the secrecy outage probability with and without jammers, and compare the theoretical value with the simulation value to prove that the equation is valid.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.130-132
• /
• 2011

본 논문은 지상파 방송망 내 전계강도가 낮은 지역에 최소한의 데이터 전송률을 보장하기 위한 계층변조와 다중경로 채널 극복 및 수신 성능 향상을 위한 다중 안테나 수신기법을 SFN에 적용하여 제안하였다. 계층변조는 기존의 데이터 스트림에 부가적인 데이터 스트림을 삽입함에 따라 지상파 3D HDTV 방송 서비스는 더 많은 유효 전송률을 확보하고 고품질 비디오 서비스를 제공할 수 있었다. 그러나 기본 서비스의 품질을 유지하면서 부가적인 서비스의 품질을 보장하기 위한 대책이 필요하다. 그래서 송, 수신 안테나의 이득을 올리기 위해 다중 안테나 사용 방식을 채용하고, 그 수신 성능을 다중 안테나 위치에 따라 비교해 보았다. 그 결과, 수신 안테나가 한 쪽의 송신 안테나에 가까워질수록 실질적인 SNR이 증가하여 BER 성능이 향상되는 것을 확인하였다.

• Journal of KIISE:Information Networking
• /
• v.29 no.5
• /
• pp.466-472
• /
• 2002

We investigate the load sharing problem between the umbrella cell and the overlaid tells in hierarchical cell structure. A load sharing strategy is proposed and its performance is evaluated by simulation when it is used for transmission of the mobile Internet traffic using the High Speed Downlink Packet Access scheme. The results show that, with the proposed strategy, the microcell backs well the overlaid picocells up, especially when a specific picocell cluster suffers unusual heavy load condition. By using the strategy, we can reduce the installation cost, otherwise needed for increasing the system capacity of every picocell cluster to cope with the unusual heavy load.

• Electronics and Telecommunications Trends
• /
• v.9 no.4
• /
• pp.23-34
• /
• 1994

직렬 접속 프로토콜은 두개 이상의 근거리 시스템간의 정보 교환에 사용된다. 현재까지 공식적인 기관에서 표준화되어 제정된 직렬 접속 규격들이 가지고 있는 성능은 전송 속도 측면에서 수 kbps에서 최대 10Mbps급에 한정되어 있는 관계로 수백 Mbps 혹은 수 Gbps급에 달하는 직렬 접속 프로토콜 성능을 요구하는 고성능 통신 및 정보 처리 시스템을 위한 새로운 직렬 접속 규격이 요구되고 있다. IEEE에서 표준화 작업중인 Multi-CPU 병렬 시스템을 위한 접속 규격인 P1355 접속 규격은 경제적이며 용이한 확장성을 가지는 칩과 칩간외에 보드와 보드간 혹은 랙과 랙간의 연결이 가능한 표준 규격안이다. P1355 접속 프로토콜은 특성이 서로 다른 DS, TS, HS link 규격들로 구성되어 있으며 이들은 선로 동작 속도 측면에서 각각 200Mbps, 250Mbps, 1Gbps의 성능을 가지고 있으며, 사용되는 데이터 심볼의 코딩 방식, 접속로 동작 초기화 및 오류 제어, 접속로의 물리적 성능 및 규격 등에서 차이를 가지고 있다. P1355는 일반적인 통신용 전송 선로에서 요구되는 물리 계층의 BER 성능보다 $10^5$에서 $10^10$배 향상된 선로 BER 특성과 이러한 하위 계층 특성을 바탕으로한 패킷 손실이 없는 간결한 상위계층 프로토콜을 특징으로 하며, 차세대 통신 수단인 ATM교환기 시스템의 서브 시스템 접속 규격으로 사용될 수 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3C
• /
• pp.408-418
• /
• 2004

In this paper, we propose a novel scalable video coding algorithm based on adaptively weighted multiple reference frame method. To improve the coding efficiency in the enhancement layer, the enhancement frame is predicted by the sum of adaptively weighted double motion compensated frames in the enhancement layer and the current frame in the base layer, according to the input video characteristics. By employing adaptive reference selection scheme at the decoder, the proposed method reduce the drift problem significantly. From the experimental results, the proposed algorithm shows more than 1.0 ㏈ PSNR improvement, compared with the conventional scalable H.263+ for various packet loss rate channel conditions.

• Journal of Internet Computing and Services
• /
• v.3 no.2
• /
• pp.57-67
• /
• 2002

The main goal of this paper is to establish the management network structure by adopting TMN concept. Hence, the management network structure consists in layers; from management application layer to lower physical layer In this paper, TMN-DCN structure is designed. That means, since the current communication network technology has developed so fast and new and more diverse communication networks have appeared, There is a need to process each management information in fast manner, The design method of management network physical structure that enhances the efficiency in network management with prompt transmission and reception of management information is proposed and the architecture is designed as well. Although there is some increase in installation fee for total link that constitutes the physical structure in lower physical layer. network management can be promptly implemented since the structure that can transfer the management information fastest is proposed.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.2
• /
• pp.75-82
• /
• 2012

In order to enable network robots to effectively collaborate with smart environments, it is crucial that various types of heterogeneous device platforms can communicate each other in flexible and efficient manners. Most of existing software platforms for network robots adopted general-purpose middlewares such as CORBA, which are not suitable to the communication between robots and smart environments due to their heavy size and complexity. Moreover, they do not provide network robot-specific features. Therefore, we propose a new TCP-based Remote Method Invocation framework. We devide the middleware into two layers i. e. transport layers and rmi layers and provide key features to each layer so that network robots can effectively communicate with various devices in smart environments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1442-1448
• /
• 2003

Network Management become more and more important issue in the network environment in which many applications such as Mail, teleconferencing, WWW and database software are operated. It can be possible for The Bridge and Router forwarding data to select next hop device which results in routing incorrect path from the viewpoint of network design. In this paper we address the problem of finding the detour routing path due to incorrect setting on routing devices. We propose the new algorithm for finding detour muting path based on hierarchical network structure analysis using information from SNMP MIB. To prove the correctness of the unposed algorithm we have done simulation with predefined data. Simulation results show that the algorithm finds detour path correctly.