• Journal of computational fluids engineering
• /
• v.19 no.3
• /
• pp.1-7
• /
• 2014

One of the most important factors in sailing yacht design is an accurate velocity prediction. Velocity prediction programs (VPPs) are widely used to predict velocity of sailing yachts. VPPs, which are primarily based on experimental data and experience of long years, suffer limitations applied in realistic conditions. Thus, in the present study, a high fidelity velocity prediction method using the computational fluid dynamics (CFD) is proposed. Using the developed method, velocity and motion of a 30 feet sloop yacht, which was developed by Korea Research Institute of Ship and Ocean (KRISO) and termed KORDY30, were predicted in upwind sailing condition.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.488-493
• /
• 2011

The object of this study is to develope the program for analyzing the fluid flow and heat transfer of PMSM electric motor. The program will be mainly used for inexperienced users of CFD analysis. So it has to be performed using the geometry data and the heat source of each part only. Interface program for converting the given data to the instruction of pre-processor is developed. The conjugate heat transfer between a flow passage of the motor and inner parts consisting of rotor and stator is regarded. In order to reduce the computational time and memory storage, cyclic boundary condition is applied. For the numerical simulation, MRF(Multi-Reference Frame) method is used to consider rotating operation of the rotor and heat source is applied to the copper, wire, and magnetic parts in the motor. On the screen of computer, the users can show the velocity distributions and the contours such as pressure, turbulent kinetic energy, turbulent dissipation rate and temperature.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.337-342
• /
• 2013

이번 연구에서는 de Laval nozzle를 이용하여 다양한 유체해석 모델과 프로그램을 비교하여 그 성능을 파악하였다. de Laval nozzle은 eigenvalue에 의해 eigenvector값이 '-'와 '+'값을 동시에 갖는 물리현상을 내포하고 있으며, 압력조건에 따라 내부에서 Normal shock이 발생하게 된다. 이러한 non-linearity를 현재 우리가 주로 사용하고 있는 상용프로그램(cfx, fluent)과 EDISON, 직접 코딩한 프로그램(Matlab이용)이 얼마나 잘 표현하는지 알아보았다. 그 결과 Van Leer Vector Splitting을 이용할 경우 물리현상을 제일 잘 표현 하였다. 또한 난류 유동(Turbulence flow)을 고려하게 될 경우, Mesh가 Boundary layer를 표현할 정도로 정밀하지 못하다면 제대로 된 해석 결과를 얻을 수 없었으며, Wall 근처에서 Non-slip condition에 의해 Vortex가 형성되고, 이 Vortex가 Back flow를 유도하여 해가 수렴하는데 방해를 하게 됨을 알 수 있었다. 이를 방지하기 위해서는 유동이 잘 표현될 수 있도록 적절한 Computational environment를 형성해 주는 것이 매우 중요하다.

• Computational Structural Engineering
• /
• v.4 no.1
• /
• pp.42-43
• /
• 1991

균열성암반의 모형화 기술은 계속적으로 보완발전되어 UDEC이 개발되었으며, 현재 UDEC의 최신판은 블록 내부를 다시 유한차분요소로 분할하여 블록의 소성거동(Mohr-Coulomb Model) 및 쪼개짐을 고려할 수 있고, 절리면에서의 유체흐름 및 유압의 발생, 그리고 열응력 해석 등 평면변형 문제의 정적해석과 지진 및 폭발하중을 고려한 동적해석이 가능하다. UDEC은 전처리 기능이 뛰어나 최소한의 입력데이타로써 전체 모형의 데이타를 자동생성시키며 절리면의 통계학적 자동생성 및 터널형상의 자동생성도 가능하다. UDEC은 실용적인 보강요소를 구비하여 Rock Bolt 뿐만 아니라 그라우트를 고려한 Cable Bolt를 모형화할 수 있으며 국부적인(Key Block)보강으로써 불연속체 전체의 안정을 검토할 수 있다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.268-268
• /
• 2009

고밀도 유도 결합 플라즈마를 이용한 연료 전기 분리판용 질화 장치를 플라즈마를 모사할 수 있는 3차원 전산 유체 역학 프로그램인 CFD-ACE+를 이용하여 해석하였따. 내장형 안테나 타입의 유도 결합 플라즈마의 전자 온도, 밀도 균일성, 가스 유동, 얇은 기판이 촘촘히 적재 되었을 경우의 플라즈마 특성을 모사하였다.

• Membrane Journal
• /
• v.29 no.5
• /
• pp.284-291
• /
• 2019

In this study, for the improvement of flow pattern with the CDI module that had the larger electrodes, it was designed with the rectangular type which is gradually wider from the inlet. Based on this, both the flow pattern of feed solution and dead zone were observed and the internal pressure, streaming line and velocity vector distribution were analyzed through the computational flow dynamics and compared with the experimental results. For all flow rates of 10, 20, 30 mL/min, there were no dead zones and the flow patterns were maintained constant. Therefore, it may be possible that the larger electrodes are applied to the CDI process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.139.1-139.1
• /
• 2015

열플라즈마 토치 및 자유연소아크 시스템 개발이 증가함에 따라 실험을 통해 얻기 어려운 물리적 특성들을 파악하기 위해 전산유체역학을 이용한 해석방법이 널리 이용되어 왔다. 대부분의 경우에 해석의 용이성을 위하여 2차원 축대칭으로 가정하여 계산을 수행하지만, 2차원 해석만으로는 실제 물리적인 현상을 정확하게 반영하기 힘들다. 따라서 보다 실질적인 결과를 얻기 위해서는 기존의 2차원 해석방법을 3차원 해석방법으로 변환할 필요성이 있다. 본 논문에서는 3차원 열플라즈마 해석을 위한 첫 단계로써 상용 CFD 프로그램인 ANSYS CFX를 사용하여 동일한 해석모델에 관하여 2차원 해석과 3차원 해석을 수행하였다. 해석방법 및 결과의 타당성을 평가하기 위하여 Schnick-Fuessel 모델 (SF 모델)과 Haddad-Farmer 모델 (HF 모델)을 선정하여 각각의 모델에 대한 해석결과를 문헌에서 발췌한 실험결과 등과 비교하였다. 이러한 결과 비교를 통해서 본 연구에서 적용한 열플라즈마 해석에 관한 수치해석 방법이 충분히 3차원 해석으로 확장 가능함을 확인할 수 있었다.

• Journal of computational fluids engineering
• /
• v.8 no.3
• /
• pp.56-65
• /
• 2003

A numerical procedure for analyzing the heat transfer in a regenerative cooling passage of liquid rocket has been developed. The thermal analysis is based on the numerical model of Naraghi〔1〕. The thermodynamic and transport properties of the combustion gases are evaluated using the chemical equilibrium composition. The pressure and heat flux obtained by the isentropic relation are in good agreement with the result of Navier-Stokes equations. The effect of design parameters on heat transfer is addressed for the pressure loss and temperature variation. Also, their constraints in designing the cooling passage are recommended. Finally, in a heated rectangular duct, the effects of secondary flow on heat transfer are scrutinized by the nonlinear k- e -fu of Park et at.〔2〕.

• Journal of computational fluids engineering
• /
• v.9 no.2
• /
• pp.1-10
• /
• 2004

In the present study, a post-processing program is developed for 3D data visualization and analysis. Because the graphical user interface(GUI) of the program is based on Qt-library while all the graphic rendering is performed with OpenGL library, the program runs on not only MS Windows but also UNU and Linux systems without modifying source code. The structure of the program is designed according to the object-oriented programming(OOP) concept so that it has extensibility, reusability, and easiness compared to those by procedural programming. The program is organized as modules by classes, and these classes are made to function through inheritance and cooperation which is an important and valuable concept of object-oriented programming. The major functions realized so far which include mesh plot, contour plot, vector plot, streamline plot, and boundary plot are demonstrated and the relevant algorithms are described.

• Journal of computational fluids engineering
• /
• v.15 no.1
• /
• pp.88-94
• /
• 2010

In general, flow analysis programs have been built in not JAVA language but such as Fortran, C or C++ because of a merit in performance of computation. However, most developer of those languages are not free for use. User should purchase the development tools of programs, and install it on their own computer. Fortunately, JAVA is a free software, and can be used to develop WEB-based programs. It is well known that the JAVA language is time consuming for calculating. However, the performance of computer power has been increased continuously, so it is sure that the former states can be overcome. In the present study, a flow analysis program, which is interactive with Graphics, using the Web-based programing language, JAVA, has been developed for solving the two-dimensional flow motion.