• 한국전산유체공학회:학술대회논문집
• /
• 2003.08a
• /
• pp.69-75
• /
• 2003

본 연구에서는 격자 생성, 초기유동조건 및 경계조건 설정 등 일련의 전처리 과정을 사용자에게 친숙한 그래픽 인터페이스 환경으로 개발하였다. MFC/Visual C++를 이용하여 개발된 전처리 프로그램은 Windows 계열의 OS와 호환이 가능하며, 기하학적 격자생성, 초기값 설정 및 수치해석 코드의 제어변수를 생성할 수 있다. 한편 사용자의 편의를 위해서 전처리 과정을 격자생성(단일격자생성, 다중격자생성), 유체 물성치정의, 경계조건 생성, 초기조건 생성 및 코드제어로 구분하였다. 개발된 전처리 프로그램의 특성으로서 다중 격자 생성 작업을 단일 격자계의 중첩으로 구성될 수 있도록 각 경계면을 "interface"형을 취하는 기능을 제공하도록 하였으며 개발된 전처리 과정을 16도의 경사면을 가지는 Compression ramp 문제 및 축대칭 Bump 문제에 적용하여 개발된 전처리 과정을 검증하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.03a
• /
• pp.202-207
• /
• 2004

In the present study a mesh generation program has been developed by using DXF file. The program consists of DXF file reading and mapping algorithm, which projects the 2-D mesh point onto the triangular surface constructed by nearest three points. The present program has been tested for mesh generations for the road tunnel ventilation analysis and analysis of lava movement in mountain area.

• 한국전산유체공학회:학술대회논문집
• /
• 2001.10a
• /
• pp.157-163
• /
• 2001

In the present study a mesh generation program is developed for three dimensional flow analyses with complex geometry. By the present program one can define vertices using various coordinate systems and cells for finite volume approach. Rendered display of the generated mesh can be also available in both orthographic and perspective projection modes. Through perspective projection mode, one can check the quality of generated mesh by moving around inside the mesh like a virtual reality. The examples of the program execution is given in the paper.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.08a
• /
• pp.82-87
• /
• 2003

Post-processing programs play an important role in the CFD data visualization and analysis. A variety of post-processing softwares have been developed and are being used in the CFD community. Developing a good quality of post-processing program requires dedication and efforts. In this paper an experience obtained through previous studies and developing post-processing programs are introduced which includes data structure and visualization algorithms.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.1
• /
• pp.119-125
• /
• 2018

The particle based computational fluid dynamics (CFD) method, which follow Lagrangian approach for fluid dynamics, fluid particle behavior by tracking all particle calculation physical quantities of each particle. According to basic concept of particle based CFD method, it is difficult to satisfy continuum theory and measure influences from neighboring particle. Article number density and weight function were used to solve aforementioned issue. Difficulties continuum mean simulate non-continuum particles such as solid including granular and sand. In this regard, the particle based CFD method modified solid particle problems by replacing viscous and surface tension forces friction and drag forces. In this paper, particle interaction model for solid particle friction model implemented to simulate solid particle problems. The broken dam problem, which is common to verify particle based CFD method, used fluid or solid particles. The angle of repose was observed in the simulation results the solid particle not fluid particle.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.3 s.73
• /
• pp.295-302
• /
• 2006

In this study, computational structural dynamic analyses of a gyrocopter have been conducted considering unsteady dynamic hub-loads due to rotating blades. 3D CATIA models with detailed mechanical parts we constructed and virtually assembled into the complete aircraft configuration. The dynamic loading generated by rotating blades in the forward flight condition are calculated by a commercial computational fluid dynamics (CFD) code such as FLUENT. Modal based transient and frequency response analyses are used to efficiently investigate vibration characteristics of the gyrocopter. Free vibration analysis results for different fuel and pilot conditions, frequency responses and transient responses for critical flight conditions are also presented in detail.

• Journal of computational fluids engineering
• /
• v.21 no.2
• /
• pp.25-31
• /
• 2016

In this paper, a study on the development of OpenFOAM grid generation program for two-dimensional flow analysis is described. By using the pre-processor(eMEGA) of EDISON_CFD system, grids for OpenFOAM flow calculation were obtained. Resultant two-dimensional grids were used to calculate flow fields by applying simpleFoam, one of the OpenFOAM's popular solvers, and the obtained flow results were compared with theoretical and experimental data available. Also grids generated by present program were compared with grids by a commercial pre-processor Pointwise for the purpose of verification. Verification work includes three cases(single block, O-type single block, and multi block grid), and all results show reasonable matches. According to the current achievement, it can be concluded that OpenFOAM grid can be constructed conveniently by using eMEGA with GUI.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.290-296
• /
• 2008

In this paper development of on-line data visualization program is described and some examples of data postprocessing are shown. The program is written in JAVA language and runs as a JAVA applet on the web browser such as Internet Explorer or Firefox. Remote users can use the program to visualize and analyze their own flow data by accessing the program server through the internet and loading data files in proper formats from their local computers. This paper describes briefly about algorithms for data visualization, structure and available functions of the program, and web sever system. The mechanism of how the JAVA applet can access and process local data files and relevant coding techniques are explained as well. Also explained is what is required for the remote users and client computers to access the program on-line. Some visualization examples performed on a local computer are illustrated by accessing the server remotely.

• Journal of computational fluids engineering
• /
• v.12 no.2
• /
• pp.32-36
• /
• 2007

NUFLEX is a general purpose program for the analysis 3D thermo/fluid flow and pre/post processor in a complex geometry. NUFLEX is composed of various physical models, such as phase change(solidification/melting) and spray, MHD(Magneto Hydraulic Dynamics) models. It is possible to simulate continuous cast iron process and spray droplet breakup/collision phenomenon. For the verification of these models, compared with the experimental data and commercial CFD code's results. The results show good agreements with experimental and comercial CFD codes's results.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.10a
• /
• pp.290-296
• /
• 2008

In this paper development of on-line data visualization program is described and some examples of data postprocessing are shown. The program is written in JAVA language and runs as a JAVA applet on the web browser such as Internet Explorer or Firefox. Remote users can use the program to visualize and analyze their own flow data by accessing the program server through the internet and loading data files in proper formats from their local computers. This paper describes briefly about algorithms for data visualization, structure and available functions of the program, and web sever system. The mechanism of how the JAVA applet can access and process local data files and relevant coding techniques are explained as well. Also explained is what is required for the remote users and client computers to access the program on-line. Some visualization examples performed on a local computer are illustrated by accessing the server remotely.