• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1361-1371
• /
• 1993

본 연구에서는 여러가지 입체 캠 기구에 대하여 기구학적인 구성조건과 캠 곡선을 바탕으로 매개변수형태의 포락면이론에 의하여 캠 형상을 구하고, 이를 직접 가공할 수 있는 NC 파트프로그램을 얻는 CAD/CAM 소프트웨어를 구성하여 정밀성, 생산성, 효율성 등을 증진하고자 한다.

• 대한조선학회지
• /
• 제31권4호
• /
• pp.22-25
• /
• 1994

선체성능, 선박운항성능 및 기관성능의 현황파악과 예측을 하는 것은 선박설계자, 선박운항자 및 선박관리운영자에게 설계, 보선관리 및 용역관리상 대단히 중요하다. 선체성능의 전산원용예측에 관한 대부분의 문헌은 모형수조시험 및 공시해상시험의 자료를 수식화하는 데 집중하고 있다. 따라서 현재까지 자료의 수식화, 예측된 자료와 성능시험결과치의 상관기법 및 PC soft ware를 이용한 선박성능예측의 체계적 접근법 등에 관한 연구가 활발히 진행되어 왔다. 또한 선박의 Abstract Log Book의 자료 및 주기관 성능자료의 수식화, PC soft ware 개발에 의한 선박운 항성능 및 기관성능예측에 대한 연구가 역시 수행되고 있다. 이와 관련하여 본 고에서는 선체 성능(저항과 추진계수), 선박운항성능 및 주기관성능의 예측에 관하여 그 개요를 소개코져 한다.

• 대한기계학회논문집
• /
• 제14권3호
• /
• pp.594-602
• /
• 1990

본 연구에서는 동력전달용 인벌류우트 원통치차(스퍼어 및 헬리컬 기어)의 강 도 및 각종 영향인자를 충분히 고려하면서 크기를 최소로 하는 치차장치의 설계법을 개발하고, 이 설계법을 기본으로 하여 퍼스널 컴퓨터 상에서 누구나 손쉽게 설계에 이 용할 수 있는 설계 시스템을 개발하여 그 평가를 수행한다.

• 한국자동차공학회논문집
• /
• 제12권3호
• /
• pp.109-121
• /
• 2004

This paper presents an optimal design method for structure-borne durability of a vehicle body structure. Structure-borne durability design requires a new design that can increase fatigue lives of critical areas in a structure and must prohibit transition phenomenon of critical areas that results from modification of the structure at the same time. Therefore, the optimization problem fur structure-borne durability design are consists of an objective function and design constraints of 2 types; type 1-constraint that increases fatigue lives of the critical areas to the required design limits and type 2-constraint that prohibits transition phenomenon of critical areas. The durability design problem is generally dynamic because a designer must consider the dynamic behavior such as fatigue analyses according to the structure modification during the optimal design process. This design scheme, however, requires such high computational cost that the design method cannot be applicable. For the purpose of efficiency of the durability design, we presents a method which carry out the equivalent static design problem instead of the dynamic one. In the proposed method, dynamic design constraints for fatigue life, are replaced to the equivalent static design constraints for stress/strain coefficients. The equivalent static design constraints are computed from static or eigen-value analyses. We carry out an optimal design for structure-borne durability of the newly developed bus and verify the effectiveness of the proposed method by examination of the result.

• 한국공작기계학회논문집
• /
• 제15권5호
• /
• pp.44-50
• /
• 2006

Cam mechanisms are one of the most popular devices for generating irregular motion and are widely used in many automatic equipments, such as textile machinery, internal combustion engines and other automatic devices. In order to obtain the positive motion of follower by rotating cam, its shape should be correctly designed and manufactured. In present paper, a CAD/CAM system is developed for shape design of disk cams using relative velocity method and NC code generation using the biarc curve interpolation. And, a disk cam is successfully manufactured by the developed CAD/CAM system. Thus, it is shown that the developed CAD/CAM system can be used for high precision cam profile CNC grinding machine.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.419-424
• /
• 1986

A technique is developed which allows a designer to interactively create an assembly of components by specifying mating contions between the individual components. Once establishing the relationships between components via the mating conditions, each component's location and orientation in the final assembly is computed. The joint information for a kinematic and dynamic analysis can be derived from the mating conditions, therefore this work may be extended to incorporate this analysis. Thorugh this development it will no longer be necessary for a designer to specify cumbersome and error prone transformation matrices in order to create an assembly. The designer also will be able to perform a kinematic or a dynamic analysis directly from an assembly model if the joint information can be automatically derived.

• 대한기계학회논문집A
• /
• 제25권1호
• /
• pp.70-80
• /
• 2001

A cycloid reducer is one of the rotational velocity reduction equipments of machinery. It has advantages of the higher reduction ratio, the higher accuracy, the easier adjustment of transmission ratio and the smaller workspace than other kinds of reducer. A cycloidal plate gear is a main part of the cycloid reducer. Its tooth shape is peculiar because of gearing with the roller gear that has the several rollers on the circular line. And then it can be designed to contact all teeth to rollers. So, the cycloid reducer has the good characteristics in the dynamic properties and the zero-backlash in the contact motion. It can be used in robots, high-precision machines and high capacity machinery. This paper proposes a new approach for the shape design of the cycloidal plate gear and presents a Computer-Aided-Design program developed by the proposed method. The first part of this paper defines the two types of the cycloid reducers and explains their mechanisms. The second part defines the instant velocity centers for each type of the cycloid reducers and calculates the contact angles and the contact points by using te geometric relationships and the kinematical properties of the reducers. The third part generates the full shape of the cycloidal plate gear by the coordinate transformation technique. Finally, this paper presents two examples for the shape design of the cycloidal plate gear in order to prove the theory of the proposed method in this paper and the accuracy of the \"CycloGear Designer\".

• 한국자동차공학회논문집
• /
• 제13권3호
• /
• pp.64-73
• /
• 2005

This paper is concerned with the simulation-based parameter determination for the tool design in the stamping process of the complicated auto-body member. The CAE procedure of the stamping process is proposed so that troubles such as wrinkle, springback and excess metal be eliminated with changing parameters such as the blank size, the restraining force of the draw-bead and the embossing shape in the die face. The selected indicators of failure during forming are wrinkling. the amount of spring after unloading of the tool, the amount of excess metal developed .The proposed analysis scheme is applied to the tool and process parameter design for the front side member of a RV car. The simulation results show that the scheme can produce sound product from the viewpoint of thickness distribution, the contact condition between tools and the blank, the shape accuracy and so on.

• 한국항공우주학회지
• /
• 제33권4호
• /
• pp.1-6
• /
• 2005

적대적 환경에서 임무를 수행하는 비행체의 레이다 포착에 관련된 스텔스 기술이 주요 설계 문제로 부각되고 있다. 레이다 회피 기능을 증대시키는 방안들을 분석하기 위해서는 Maxwell 방정식을 해석하는 기법이 필요한데, 본 연구에서는 기본 수치기법으로 다학제 최적설계 연구에 적합한 CFD 기법을 이용하였다. 시간 영역 전자기장 데이터를 DFFT 알고리즘을 이용하여 주파수 영역으로 변환한 후, 근방-원방 변환에 기초한 Green 함수 관계식을 사용하여 RCS 특성을 예측하였다. 검증을 위해 완전전도 실린더 주위 TE 모드를 고려하였으며, CFD 기법을 원용한 CEM 코드의 가능성을 확인하기 위해 비행체 날개단면 주위의 전자기 산란 현상을 계산하였다.