• Journal of the Korean Society of Radiology
• /
• v.16 no.7
• /
• pp.871-877
• /
• 2022

This study was conducted to improve the problems of exposure dose and image reading applied to patients due to the incorrect use of AEC during chest radiography. Images were acquired by dividing the case where AEC was used as the test condition and the case where AEC was not used. As a result of the study, the dose was reduced by 1.17% in 110 kVp without AEC than with AEC, 17.2% decrease at 100 kVp, 30.19% decrease at 90 kVp, and 46.45% decrease at 80 kVp. There was a significant difference in the statistical values according to the tube voltage change in the lung, trachea, and heart SNR average values with AEC and without AEC 110 kVp, but the difference in image quality was insignificant in actual images. When AEC was not applied at the same tube voltage, the dose could be reduced by 17.2% while maintaining the image quality similar to that of with AEC at 100 kVp without AEC. Therefore, rather than relying on AE conditions during chest radiographic examination, it is considered that the conditions should be considered for the examination while lowering the dose by selecting an appropriate tube voltage.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.28-41
• /
• 2022

A road system with CV(Connected Vehicle)s, which is often referred to as a cooperative intelligent transportation system (C-ITS), provides various road information to drivers using an in-vehicle warning system. Road environments with CVs induce drivers to reduce their speed or change lanes to avoid potential risks downstream. Such avoidance maneuvers can be considered to improve driving behaviors from a traffic safety point of view. Thus, empirically evaluating how a given in-vehicle warning information affects driving behaviors, and monitoring of the correlation between them are essential tasks for traffic operators. To quantitatively evaluate the effect of in-vehicle warning information, this study develops a method to calculate compliance rate of drivers where two groups of speed profile before and after road information is provided are compared. In addition, conventional indexes (e.g., jerk and acceleration noise) to measure comfort of passengers are examined. Empirical tests are conducted by using PVD (Probe Vehicle Data) and DTG (Digital Tacho Graph) data to verify the individual effects of warning information based on C-ITS constructed in Seoul metropolitan area in South Korea. The results in this study shows that drivers tend to decelerate their speed as a response to the in-vehicle warning information. Meanwhile, the in-vehicle warning information helps drivers to improve the safety and comport of passengers.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.1
• /
• pp.33-43
• /
• 2023

Pathological wear across the entire dentition causes problems such as collapsed occlusal plane, reduced vertical dimension, anterior premature contact, inadequate anterior guidance, and tooth migration, thereby induce symptoms such as temporomandibular joint disorder, reduced masticatory efficiency, and tooth hypersensitivity. For the treatment of patients with excessive wear, evaluation of vertical dimension should be preceded along with analysis of the cause. The patient in this case was a 45-year-old female with a history of orthognathic surgery. Through clinical examination, radiographic examination, and model analysis, overall tooth wear, interdental spacing in the anterior maxillary region, retruded condylar position, and insufficient interocclusal space for prosthetic restoration were confirmed. Full mouth rehabilitation with increased vertical dimension was planned, the patient's adaptation to the new vertical dimension was evaluated with a removable occlusal splint and temporary prosthesis, and cross-mounting was performed based on the temporary restoration to fabricate the definitive zirconia prosthesis, maintaining the adjusted vertical dimension. It showed satisfactory functional and esthetic results through stable restoration of the occlusal relationship.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.249-256
• /
• 2022

The implant prosthesis of anterior maxilla requires careful consideration in planning. In order to satisfy both esthetic and functional needs of a patient, fusion of intra-oral scan in Cone-beam computed tomography (CBCT) and facial scan can be considered. Bony structures and soft tissues captured in CBCT and occlusal surfaces of intra oral scan were incorporated into personal characteristics from facial scan. The patient had insufficient buccal bone on maxillary anterior area. The maxillary implants could not be placed on the most ideal position. However, the "top down" approach completed by computer-generated arranging of teeth in implant planning and surgery with surgical guide resulted in esthetically and functionally satisfying result regardless of the limitation. Careful diagnosis with digital technique and the usage of surgical guide resulted in successful surgery and esthetic restoration. The temporary fixed prostheses were designed, restored and evaluated. The patient was not satisfied with the first design of temporary prosthesis, which showed uneven space distribution between teeth due to the position of maxillary implant. The design was modified by changing proximal emergence contours and line angle to alter the perceived since of incisors. The patient was satisfied with the new design of provisional restoration. A digital occlusion analyzer (Arcus Digma II, KaVo, Leutkirch, Germany) was used to measure inherent condylar guidance and anterior guidance of a patient to provide a definitive prosthesis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.2
• /
• pp.143-152
• /
• 2023

Although tooth wear is a normal process due to aging, severe tooth wear causes various complications such as increased tooth sensitivity, loss of tooth structure, and pulp complications. In the treatment of patients with excessive tooth wear, the evaluation of loss of vertical occlusal dimension should be prioritized. If it is necessary to increase the vertical dimension to secure the restoration space, it is important to establish a treatment plan with the comprehensive analysis and determine the minimum vertical dimension elevation. In this case, 66-year-old male patient with severe worn dentition wanted to restore masticatory function and improve esthetic restoration. In order to determine the appropriate vertical dimension of the patient, we evaluated oral examination, radiographic examination, and diagnostic cast examination, and performed rehabilitation with minimum vertical dimension elevation. As a result of observation for 8 months, the definitive prosthesis was completed with contact of all teeth in centric occlusion, and proper anterior/posterior guidance. Through the above process, satisfactory aesthetic and functional outcomes were obtained.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.2
• /
• pp.125-134
• /
• 2023

When the patient with class III malocclusion needs extensive oral rehabilitation due to multiple missing teeth, accurate diagnosis, and careful analysis, such as the patient's occlusal relationship, facial changes, and evaluation of the temporomandibular joint are essential. Orthognathic surgery is often performed for aesthetic improvement, depending on the patient's chief complaint. If it is not possible due to certain circumstances, partial aesthetic improvement can be achieved through minimal elevation of the vertical dimension. As this patient may have unexpected issues, such as temporomandibular joint disorder, oral habits like bruxism, and masticatory muscle tension, it was determined whether the patient could adjust to a reversible temporary removable partial denture. After this, the maxillary implant-supported fixed prostheses and the mandibular fixed prostheses were used to achieve stable posterior support and to partially improve the maxillary anterior esthetics. The patient was satisfied with the results both aesthetically and functionally. The prognosis is expected to be good if regular check-ups are conducted.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.3
• /
• pp.215-226
• /
• 2023

Severe wear of the anterior teeth facilitates the loss of anterior guidance, which protects the posterior teeth from wear during excursive movement. Additionally, when treating patients with collapsed occlusion due to multiple tooth loss and tooth wear, it is important to determine the presence of vertical dimension loss through accurate clinical and radiographic examinations and diagnostic wax-up. The patient of this case is a 44-year-old female patient who complained of overall tooth wear and loss of posterior teeth due to bruxism and clenching habits, visited the hospital with the address of restoring masticatory function and improving aesthetic appearance through prosthetic treatment. Through model analysis and diagnostic wax-up, an increase in vertical dimension was determined, and full mouth restoration with fixed prostheses was planned. The degree of adaptation to the vertical dimension was confirmed step by step using an occlusal splint designed with CAD (Computer aided design) software and 3-D (3-Dimensional) printed, and then restored with provisional restoration and after a 4-month adaptation period, the entire dentition was restored with metal ceramic crowns and implants. Through this procedure, satisfactory treatment results were obtained in terms of function and aesthetics.

• Journal of Chest Surgery
• /
• v.30 no.1
• /
• pp.27-33
• /
• 1997

Retrograde myocardial protection is widely accepted in CABG operation because of the limitations of the antegrade method in the coronary arterial stenosis lesions. We analyzed 76 c ses of retrograde myocardial protection among 96 cases of CABG operation performed between April 1994 and August 1995, There were 48 males and 25 females, and the mean age was 58.2 $\pm$ 8.3 years. 53 patients (70%) were operated for unstable angina, 14 (18%) for stable angina, 6 (8%) for post-infarct angina, 1 (1%) for acute myocardial infarction, and 2()%) for failed PTCA. Preoperative coronary angiography revealed 3-vessel disease in 42 cases, 2-vessel disease in 11, 1-vessel disease in 10, and left main disease in 13 cases. We used SVG(63 cases), LIMA(69 cases), RIMA(11 cases), radial artery(6 cases), and gastroepiploic artery(1 case) for the grafts. Mean anastomosis was 3.2 $\pm$ 1.1. We protected the myocardium with antegrade induction and retrograde maintenance in all the cases except a case of retrograde induction and maintenance. During the aortic cross-clamping, blood cardioplegia was administered intermittently in 19 cases, and continuously in 57 In 39 cases, we used retrograde ardioplegia and antegrade perfusion of RCA graft simultaneously. We had no operative motality. Perioperative complications were arrhythmia in 15 cases, perioperatve myocardial infarction in 10, low cardiac output syndrome In 8, transient neurologic problem in 7, transient psychiatric problem in 6, ARF in 3, bleeding in 2, pneumonia in 2, wound infection in 1, and duodenal ulcer perforation in 1 . In this report, we experienced 76 cases of CABG operation with retrograde myocardial protection under the acceptable operative risk without operative mortality.

• Journal of Korean Society of Forest Science
• /
• v.89 no.3
• /
• pp.310-322
• /
• 2000

The objectives of this study were to classify the types of vegetation in Pinus densiflora for. erecta stands. The study sites were located at Sokwang-Ri, Mt. Chungok(1,276m), Uljin, Mt. Kumma(1,017m) and Mt. Eungbong(1,267m). Two hundred thirty releves were classified and explained by phytosociological analysis(the method of ZM schools), and the results were summarized as follows. Pinus densiflora for. erecta stands were classified into Vaccinium koreanum community, Rhododendron micranthum community, Quercus dentata community, Acer pseudosieboldianum community, and Typical community. Quercus dentata community was divided into Festuca ovina group, Robinia pseudoacacia group, and Typical group, and Acer pseudosieboldianum community was divided into Hydrangea serrata for. acuminata group, Disporum smilacinum group, Magnolia sieboldii group, Carpinus laxiflora group, and Typical group, and Typical community was divided into Melampyrum roseum group and Typical group. And some groups were divided into 7 subgroups. Therefore, Pinus densiflora for. erecta stands had total of 16 vegetation units, out of those units, Vaccinium koreanum community distributed all over the studied areas. While Rhododendron micranthum community distributed mainly at Sokwang-Ri and Mt. Chungok. Therefore it was considered to be useful indicator in determining the range of afforestation and natural distribution of Pius densiflora for. erecta stands. The classified vegetation units were investigated by using of coincidence method. The results indicated that Quercus dentata community distributed mainly below 100 meters at the sea level, while other communities distributed above 350 meters at the sea level. According to the correlations between vegetation units and topography, Vaccinium koreanum and Rhododendron micranthum communities distributed mainly above middle slope areas, Quercus dentata community distributed mainly from lower slope to upper slope areas, Acer pseudosieboldianum community distributed mainly between valley and lower slope areas, and Typical community distributed mainly above upper slope areas. According to the correlations between vegetation units and 5 study areas, Quercus dentata community was distributed in the region of Uljin, and other communities were evenly distributed over other studied areas. According to the correlations between the units and aspects, all communities occurred all aspects, but most of the communities tended to be more distributed at south slopes than at north slopes, which meant that the relic stands of Pinus densiflora for. erecta were remained largely as patch phase status at south slopes.

• Journal of The Korean Ophthalmological Society
• /
• v.59 no.11
• /
• pp.1017-1023
• /
• 2018

Purpose: A recently introduced phacoemulsification system, the WhiteStar $Signature^{(R)}$ PRO, has demonstrated improved nucleus followability and cutting efficiency via an improved pump regulator with a higher reaction response and an automatic occlusion sensing system. In this study, we compared various phacoemulsification parameters between the new system and an older version of the device. Methods: A total of 80 eyes of 68 patients with cataracts who had undergone phacoemulsification by a single surgeon were included in this study. Forty eyes of patients underwent phacoemulsification using the older $Signature^{(R)}$ system (WhiteStar); these patients were classified as the control group. Another 40 eyes of patients underwent phacoemulsification with the newer enhanced system, the WhiteStar $Signature^{(R)}$ PRO; these patients were assigned to the experimental group. During the operation, operative parameters, including the effective phaco time (parameter of effective phaco time with a specific coefficient for the transversal movement expressed in seconds, EFX), ultrasound time (seconds [s]), effective phacoemulsification time (EPT, s), average phacoemulsification power (AVG, %), and balanced salt solution usage, were measured to determine the performance enhancement offered by the updated system. Central corneal thickness was measured before and after surgery to compare corneal edema. The relationships between the two groups were analyzed using an independent t-test. Results: The Signature $PRO^{(R)}$ system showed a lower EFX (p < 0.001), a shorter EPT (p < 0.001), and a smaller AVG (p < 0.001). Postoperative corneal thickness did not differ significantly between the two groups. Conclusions: Comparing the efficacy of the improved reaction speed of the device and automatic occlusion sensing system in performing phacoemulsification, the updated Signature $PRO^{(R)}$ system demonstrated superior followability and cutting efficiency regardless of nuclear cataract hardness.