• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.1
• /
• pp.76-81
• /
• 2014

Purpose: Diversity and the lachrymal duct deformities and the passage inside the nasal cavity except for anterior image such as epiphora happens during the test were able to express more precisely during the dacryoscintigraphy. Also, we thought about the necessity of a method to classify the passage into the naso-lachrymal duct from epiphora. Therefore, we are to find the validity of the method to obtain both oblique views except for anterior views. Materials and Methods: The targets of this research are 78 patients with epiphora due to the blockage at the lachrymal duct from January 2013 to August 2013. Average age was $56.96{\pm}13.36$. By using a micropipette, we dropped 1-2 drops of $^{99m}TcO4^-$ of 3.7 MBq (0.1 mCi) with $10{\mu}L$ of each drop into the inferior conjunctival fold, then we performed dynamic check for 20 minutes with 20 frames of each minute. In case of we checked the passage from both eyes to nasal cavity immediately after the dynamic check, we obtained oblique view immediately. If we didn't see the passage in either side of the orbit, we obtained oblique views of the orbit after checking the frontal film in 40 minutes. The instrument we used was Pin-hole Collimator with Gamma Camera(Siemens Orbiter, Hoffman Estates, IL, USA). Results: Among the 78 patients with dacryoscintigraphy, 35 patients were confirmed with passage into the nasal cavity from the anterior view. Among those 35 patients, 15 patients were confirmed with passage into the nasal cavity on both eyes, and it was able to observe better passage patterns through oblique view with a result of 8 on both eyes, 2 on left eye, and 1 on right eye. 20 patients had passage in left eye or right eye, among those patients 10 patients showed clear passage compared to the anterior view. 13 patients had possible passage, and 30 patients had no proof of motion of the tracer. To sum up, 21 patients (60%) among 35 patients showed clear pattern of passage with additional oblique views compared to anterior view. People responded obtaining oblique views though 5 points scale about the utility of passage identification helps make diagnoses the passage, passage delayed, and blockage of naso-lachrymal duct by showing the well-seen portions from anterior view. Also, when classifying passage to naso-lachrymal duct and flow to the skin, oblique views has higher chance of classification in case of epiphora (anterior:$4.14{\pm}0.3$, oblique:$4.55{\pm}0.4$). Conclusion: It is considered that if you obtain oblique views of the bilateral orbits in addition to anterior view during the dacryoscintigraphy, the ability of diagnose for reading will become higher because you will be able to see the areas that you could not observe from the anterior view so that you can see if it emitted after the naso-lachrymal duct and the flow of epiphora on the skin.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1410-1419
• /
• 2019

In this research, it is to find a method that frost does not form on the outdoor unit to develop a heat pump capable of heating in cold regions. For this reason, we produced an incubator capable of creating an environment of -25℃, and constructed an experimental apparatus so that experiments in the room were possible. However, it is necessary to grasp the characteristics of the air reaching the front of the heat pump outdoor unit installed in the experimental apparatus, and flow analysis was performed using ANSYS CFX, which is general-purpose software. As a result, the flow velocity of the air reaching the front of the outdoor unit in the outdoor unit chamber in the entire region of the simulation conditions (5.0 to 7.5 m/s) has many differences in the upper and lower portions, resulting in a natural state. It turned out that the condition can not be satisfied. Therefore, it is determined that it is necessary to additionally install a frequency divider at the front of the outdoor unit to make the flow velocity constant.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.3
• /
• pp.191-198
• /
• 2013

In this paper, we designed a wideband Tonpilz transducer, and verified the validity of the design through experiments. The wide frequency bandwidth was achieved by coupling the fundamental longitudinal mode of the transducer with a flapping mode of the head mass. Structure of the Tonpilz transducer was optimized by means of the finite element method and genetic algorithm to achieve the widest fractional bandwidth under design constraints. The optimized structure showed a far wider -6 dB fractional bandwidth of transmitting responses than that of single mode transducers. For verification of the design result, we manufactured a transducer prototype of the designed structure and characterized its performance, which showed good agreement with the design results.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.396-410
• /
• 2020

The design and the construction are carried out by installation of new caissons on the back or the front of existing caissons to increase the stability of existing caisson breakwater. In this study, we use the eigenfunction expansion method to analyze the effects of wave structure interaction when new porous dual circular caissons are installed on the back or the front of existing breakwater. The porous dual circular caisson which consisting of a porous outer cylinder circumscribing an impermeable inner cylinder is one type of seawater exchanging breakwater. The comparison of numerical results between present method and Sankarbabu et al. is made, and the wave force and the wave run-up acting on each porous dual circular caisson are calculated for various parameters by considering the wave structure interaction.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.321-323
• /
• 2012

유기 발광 다이오우드는(OLEDs) 자체 발광 소자로써 높은 시야각, 높은 효율, 그리고 빠른 응답속도 등의 장점을 가지고 있어 차세대 디스플레이 및 조명 소자로서 많은 연구가 진행되고 있다. 특히 유기 발광 다이오우드는 차세대 반도체 조명 소자로서 조명의 패러다임을 바꿀 수 있는 기술로 인식되고 있다. 하지만, 유기 발광 다이오우드 조명의 상용화를 위해서는 가격 경쟁력을 갖추는 것이 시급하며, 이를 위해 저가 공정 개발이 필요하다. 본 연구에서는 유기발광 다이오우드 조명 제작에 필수적인 전면 전극 및 절연막 증착 공정을 기존의 노광 공정이 아닌 shadow mask 기술을 적용하여 형성하였다. 먼저 유리 기판 상에 150 nm 두께의 ITO 막을 shadow mask를 이용하여 증착하였다. 기존 공정에서는 노광 및 식각 공정을 이용하여 증착하는 것이 일반적이며, 광학적, 전기적 특성 또한 타 공정 방법에 비해 우수하다. 하지만 일련의 복잡한 공정으로 인해 제조 원가를 상승 시키는 단점이 있다. Fig. 1은 shadow mask를 이용하여 ITO를 증착을 수행한 공정의 모식도이다. ITO 박막 증착 후 표면 거칠기 제어 및 면저항 제어를 위해 O2 plasma 처리와 RTA 공정을 추가 수행하였다. Fig. 2(a)는 플라즈마 처리 및 열처리 공정 수행 후에 측정한 표면 AFM 사진이다. 열처리 및 플라즈마 처리 후에 ITO 박막의 표면 거칠기는 10배 이상 향상되었으며, 이는 유기 발광 다이오우드 조명 소자의 전면 투명 전극으로 사용되기에 적합한 값이다. 또한 전기적 특성 중 하나인 면저항 값은 열처리 및 플라즈마 처리 전/후의 값에서 많은 차이를 보인다. 표면 거칠기가 향상됨에 따라 면저항 값 역시 향상되는 결과를 보여주는데, 표면 처리전후의 면저항 값은 각각 28.17, 13.18 ${\Omega}/{\Box}$이다. 일반적으로 유기 발광 다이오우드의 전면 투명 전극으로 사용되기 위해서는 15 ${\Omega}/{\Box}$이하의 면저항 값이 필요한데, 표면 처리 후의 면저항값들은 이로한 조건을 만족한다. Fig. 3은 shadow mask 기술을 이용하여 절연막까지 형성한 유기 발광 다이오우드 소자의 전자 현미경 사진으로, 기존의 공정을 이용한 경우와 큰 차이는 없으며, 다만 shadow tail이 약 $30{\mu}m$ 정도 발생함을 확인할 수 있다. 절연막의 특성 평가 기준인 누설 전류 밀도는 $10-5A/cm^2$으로 기존의 공정을 이용한 경우에 비해 95% 수준으로서 shadow mask를 이용한 공정이 기존의 노광 및 식각 공정을 이용한 경우에 비해 공정 수는 9개가 단축됨에도 불구하고, 각 증착 박막의 특성에는 큰 차이가 없음을 알 수 있다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.543-547
• /
• 2005

해수소통을 전제한 경우 새만금호 내측의 염분변화가 만경강의 평수량 및 홍수량 유입에 따라 혼합확산되는 것을 평가하고 배수갑문 방류시 담수가 외해에 미치는 영향범위를 평가하기 위한 수치모형실험이 실시되었다. 이때 새만금호 내부의 관리수위는 DL=-1.5m, DL=-0.5m, DL=-0.0m, DL=+0.5m가 고려되었다. 외해역의 평가는 새만금을 포함한 전체해역에 대해 외해경계에서 4개의 주요분조($M_2,S_2,K_1,O_1$)의 진폭과 위상각을 대입하고 2차원 ADCIRC 및 3차원 TIDE3D 모형을 적용하였다. 내부는 여기에 3개 연직층을 고려한 3차원 ICM 모델이 추가 적용되었다. 내부의 혼합확산 평가 결과는 시간이 지남에 따라 외해에서 유입되는 염수가 상대적으로 저염인 담수호 내부로 유입 확산되는 것이 평면적으로나 연직방향으로 변화되는 것을 매우 뚜렷하게 나타남을 알 수 있고, 최소 1개월 이상 경과되어야 만경호측에 외해수가 혼합되는 것으로 분석된다. 수문을 개방하지 않은 상태에서 새만금 방조제 외해의 최강창낙조시 조류속도는 0.5-0.6m/s 정도에 해당되는 것으로 분석되었다. 신시갑문을 개방하는 경우 관리수위가 DL=-1.5m와 DL=+0.5m로 변함에 따라 갑문 전면 10Km-l3Km에 이르는 해역까지 수문개방에 따라 0.5m/s의 유속이 형성된다. 가력갑문을 개방하는 경우는 신시갑문의 개방에 따른 영향보다는 작지만 갑문 전면 14Km까지 0.5m/s의 강한 유동이 관리수위별로 나타나고 있다. 이러한 결과는 담수 방류로 인한 영향이 주기적으로 낙조시에 발생되어 새만금 방조제 전면의 해수순환과 유동에 적지 않은 영향을 미칠 개연성을 제시하는 것으로 해석된다.$\cdot$유출에 의한 수질변화양상을 단계적으로 구분하여 수질변화에 중요한 영향을 미치는 인자에 대한 이론적인 분석을 수행하고, 배수갑문 개방에 의한 수질개선효과를 최대화하기 위한 환경관리 방안 제시에 중점을 두어 수행하였다.ncy), 환경성(environmental feasibility) 등을 정성적으로(qualitatively) 파악하여 실현가능한 대안을 선정하였다. 이렇게 선정된 대안들은 중유역별로 검토하여 효과가 있을 것으로 판단되는 대안들을 제시하는 예비타당성(Prefeasibility) 계획을 수립하였다. 이렇게 제시된 계획은 향후 과학적인 분석(세부평가방법)을 통해 대안을 평가하고 구체적인 타당성(feasibility) 계획을 수립하는데 토대가 될 것이다.{0.11R(mm)}(r^2=0.69)$로 나타났다. 이는 토양의 투수특성에 따라 강우량 증가에 비례하여 점증하는 침투수와 구분되는 현상이었다. 경사와 토양이 같은 조건에서 나지의 경우 역시 $Ro_{B10}(mm)=20.3e^{0.08R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\%)}$로 나타났다.천성 승모판 폐쇄 부전등을 초래하는 심

• Geotechnical Engineering
• /
• v.14 no.4
• /
• pp.177-204
• /
• 1998

In the present study, a method of quasi-three dimensional stability analysis is proposed for a systematic design of the GRS-RW(Geosynthetic-Reinforced Soil Retaining Wall) system based on the postulated three dimensional failure wedge. The proposed method could be applied to the analysis of the stability of both the straight-line and cove-shaped are. As with skew reinforcements. Maximum earth thrust expected to act on the rigid face wall is assumed to distribute along the depth, and wall displacements are predicted based on both the assumed compaction-induced earth pressures and one dimensional finite element method of analysis. For a verification of the procedure proposed in the present study, the predicted wall displacements are compared with chose obtained from the RMC tests in Canada and the FHWA tests in U.S.A. In these comparisons the wall displacements estimated by the methods of Christopher et at. and Chew & Mitchell are also included for further verification. Also, the predicted wall displacements for the convex-shaped zone reinforced with skew reinforcements are compared with those by $FLAC_{3D}$ program analyses. The assumed compaction-induced earth pressures evaluated on the basic of the proposed method of analysis are further compared with the measurements by the FHWA best wall. A parametric stduy is finally performed to investigate the effects of various design parameters for the stability of the GRS-RW system

• Journal of the Korean Geotechnical Society
• /
• v.15 no.3
• /
• pp.41-70
• /
• 1999

The benefits of utilizing internal reinforced members, such as soil nails and ground anchors, in maintaining stable excavations and slopes have been known among geotechnical engineers to be very effective. Occasionally, however, both soil nails and ground anchors are simultaneously used in one excavation site. In the present study, a method of limit equilibrium stability analysis of the excavation zone reinforced with the vertically or horizontally mixed nail-anchor system is proposed to evaluate the global safety factor with respect to a sliding failure. The postulated failure wedges are determined based on the results of the $FLAC^{2D}\; 및\; FLAC^{3D}$ program analyses. This study also deals with a determination of the required thickness of the shotcrete facing. An excessive facing thickness may be required due to both the stress concentration and the relative displacement at the interface zone between the soil nailing system and the ground anchor system. A simple finite element method of analysis is presented to estimate the corresponding relative displacement at the interface zone between two different support systems. As an efficient resolution to reduce the facing thickness, the modified bearing plate system is also proposed. Finally with various analysis related to the effects of design parameters, the predicted displacements are compared with the results of the $FLAC^{2D}$ program analyses.

• Journal of Sericultural and Entomological Science
• /
• v.2
• /
• pp.33-39
• /
• 1962

The results for the investigation of the various aromatic plants applied diets on silkworm raising from spring to autumn crops are found as followings. 1. There was no difference between the chemical menthol solution (1.0%) enriched diet and the normal diet for silkworm physiology. Neither injury nor advantage was obtained from the investigation. 2. It was found that there was no danger to use the mulberry leaves as silkworm diet by planting Mentha arvensis L. in the vacansy of mulberry farm, and no worse effect was found by rubbing the leaves of Mentha arvensis L. to the surface of mulberry leaves before feeding to silkworm. 3. For the investigation due to Perilla Ocymoides var application in stead of menthol plant ascribed in Paragraph (2) was obtained the same result. 4. As a conclusion of the study, the plantation of the both aromatical plants with mulberry trees is harmless for silkworm growing even though farmers worry about these to plant together with mulberry tree on mulberry farm.

• Journal of the Korean Society for Library and Information Science
• /
• v.38 no.2
• /
• pp.119-136
• /
• 2004

The purpose of this study is to analyze cases of several academic libraries, both in Korea and other countries, which have outsourced part or all of cataloging operations and examine current trends and controversy over outsourcing. Contrary to expectations of reduced expenses and increased efficiency in cataloging, outsourcing often results in bibliographic records of low quality which require additional costs to correct errors and maintain consistency and accuracy of records, and therefore, fails to reach the goal. Due to the absence of high quality bibliographic utilities, union catalogs, and authority databases, and lack of expertise in cataloging among outsourcing service providers, it seems that outsourcing is not currently an appropriate tactic for cataloging in academic libraries in Korea.