• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.12
• /
• pp.913-917
• /
• 2009

Flash memories have asymmetric I/O costs for read and write in terms of latency and energy consumption. However, the ratio of these costs is dependent on the type of storage. Moreover, it is becoming more common to use two flash memories on a system as an internal memory and an external memory card. For this reason, buffer cache replacement algorithms should consider I/O costs of device as well as possibility of reference. This paper presents WWCLOCK(Write-Weighted CLOCK) algorithm which directly uses I/O costs of devices along with recency and frequency of cache blocks to selecting a victim to evict from the buffer cache. WWCLOCK can be used for wide range of storage devices with different I/O cost and for systems that are using two or more memory devices at the same time. In addition to this, it has low time and space complexity comparable to CLOCK algorithm. Trace-driven simulations show that the proposed algorithm reduces the total I/O time compared with LRU by 36.2% on average.

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.64-71
• /
• 2017

In this paper, Kalman filter and RRWA algorithm are used to estimate the accurate target in IR-UWB (Impulse-Radio Ultra Wideband) radar system, which enables accurate location recognition of indoors and outdoors with low cost and low power consumption. In the signal reflected by the target, unnecessary signals exist in addition to the target signal. We have tried to remove unnecessary signals and to derive accurate target signals and improve performance. The location of the targets is estimated in real time with one transmitting antenna and one receiving antenna. The Kalman filter was used to remove the background noise and the RRWA algorithm was used to remove the reflected signal. In this paper, we think that it will be useful to study the accurate distance estimation and tracking in future target estimation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.4
• /
• pp.50-56
• /
• 2010

Supervisory Control and Data Acquisition Systems (SCADAs) is real-time monitor and control systems. SCADA systems are used to monitor or control chemical and transportation processes, in municipal water supply systems, electric power generation, transmission and distribution, gas and oil pipelines, and other distributed processes. SCADA refers to a large-scale distributed system. The supervisory control system is placed on top of a real time control system to control external processes. Emerging security technologies and security devices are decreasing the vulnerability of the power system against cyber threats. Dealing with these threats and analyzing vulnerabilities is an important task for equipment such as RTU, IED and FEP. To reduce such risks, we develop such a SCADA testbed. This paper presents the development of a testbed designed to assess the vulnerabilities SCADA networks(including serial communication).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.544-546
• /
• 2018

Things Internet technology is rapidly becoming a reality in many parts of our lives through various product services. As the perception of Internet services for things has become more common and the intention to purchase Internet devices has begun to increase, various Internet devices have appeared and the need for a server to control them has been emphasized. In addition, IFTTT, a representative Internet automation service platform, is continuously diversifying related services such as home appliances, light bulbs, and smart homes, and has a variety of Internet information such as weather information and news, which can be utilized through IFTTT. And MQTT, which is designed for use in low-power, low-bandwidth environments. This paper implements a server for controlling and managing Internet devices and related services based on IFTTT and MQTT.

• Journal of the military operations research society of Korea
• /
• v.36 no.2
• /
• pp.53-69
• /
• 2010

The long-term purpose of Military Acquisition Program Management (MAPM) is to fulfill requested performance, budget, and timing of military capability building. The Defense Acquisition Program Administration was established in 2006 and it adopted Integrated Control System. Moreover, there have no much studies done to examine the condition of Defense Capability Improvement Project in Korea through an empirical research although there are sixty one organizations are operating currently under Defense Capability Improvement Project. The objective of this study is to recognize Military Acquisition Program Management as a single project and to critically review relationship between Critical Success Factors (CSF) and Military Acquisition Program Management. Accordingly, three determinants to lead to successful Military Acquisition Program Management are "Communication" "User Participation" and "User Requirement." This study also demonstrates that Critical Success Factors have distinctive influences on successful Military Acquisition Program Management based on characteristic, size and phase of project. In retrospect, it is meaningful that Integrated Project Team (IPT) could classify priority of management according to characteristic, size and phase of project in the course of implementation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.6
• /
• pp.695-700
• /
• 2005

In the sensor network, a lot of sensor nodes are scattered sparsely and organizes a united communication network between each node. After that, environmental information around each sensor node are gathered and analyzed. Because each node operates under resource constraint, the efficiency and hardware specification of a node should be maximized. There exist technical constraints until now but recent technical progress in IC fabrication and wireless network enables to construct a tiny embedded system, which has the properties of low cost, low power consumption, multi functions. Wireless sensor network becomes a modern research field with technical improvements, is studied in numerous laboratories, and is called as diverse different project names - Wireless Integrated Network Sensors (WINS), Mobile Ad hoc NETwork (MANET), Ubiquitous Sensor Network (USN). TinyOS is one of leading project and is widely used. In this paper, we suggest a sensor network, which uses TinyOS platforms and aims for context awareness in a home environment.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.11
• /
• pp.596-603
• /
• 2004

This paper proposes an expert system based on the pattern recognition method which can enhance the accuracy and effectiveness of real-time bus reconfiguration strategy for the transfer of faulted load when a main transformer fault occurs in the automated substation. The minimum distance classification method is adopted as the pattern recognition method of expert system. The training pattern set is designed MTr by MTr to minimize the searching time for target load pattern which is similar to the real-time load pattern. But the control pattern set, which is required to determine the corresponding bus reconfiguration strategy to these trained load pattern set is designed as one table by considering the efficiency of knowledge base design because its size is small. The training load pattern generator based on load level and the training load pattern generator based on load profile are designed, which are can reduce the size of each training pattern set from max L/sup (m+f)/ to the size of effective level. Here, L is the number of load level, m and f are the number of main transformers and the number of feeders. The one reduces the number of trained load pattern by setting the sawmiller patterns to a same pattern, the other reduces by considering only load pattern while the given period. And control pattern generator based on exhaustive search method with breadth-limit is designed, which generates the corresponding bus reconfiguration strategy to these trained load pattern set. The inference engine of the expert system and the substation database and knowledge base is implemented in MFC function of Visual C++ Finally, the performance and effectiveness of the proposed expert system is verified by comparing the best-first search solution and pattern recognition solution based on diversity event simulations for typical distribution substation.

• Information and Communications Magazine
• /
• v.28 no.4
• /
• pp.41-50
• /
• 2011

미래 전에서는 정보의 중요성이 더욱 부각되고 있으며 정보의 수집 및 전파, 정확한 지휘결심 및 전파, 기동타격체계의 통제 등으로 이어지는 지휘통제의 전 과정을 유기적으로 연결하여, 그 성능을 극대화시키는 것이 네트워크 중심전(NCW: Net-Centric Warfare)의 개념이다. NCW 실현을 위해 개발중인 여러 체계 중 주목 받고 있는 것이 무인기(UAV: Unmanned Aerial Vehicle) 이다. 무인기는 감시정찰, 고정밀 타격, 그리고 전투피해평가 기능 등을 수행하며, 전술적인 상황인식이 가능하게 한다. 무인기가 이러한 임무를 수행하기 위해서는 비행체의 상태정보, 비행체의 조종통제정보, 그리고 임무 탑재체가 획득한 정보의 간단없고 정확한 전달이 요구된다. 이러한 정보를 전송하기 위한 비행체와 지상체간의 제반 통신을 데이터 링크(Data Link)라 하며, NCW 구현에 있어서 가장 핵심이 되는 요소이다. 세계 각국은 영상정보 수집자산으로서 무인기와 데이터링크의 개발에 박차를 가하고 있는 실정이며, 우리 군도 전력화가 계획된 각 제대별 무인기의 통합운용을 위한 영상정보 공용데이터 링크 (MPI-CDL: Multi-Platform Image and Intelligence Commom Data Link)를 개발중에 있으며 지속적인 영상정보 수집자산의 소요증가에 따른 주파수 획득문제와 사업별 독자적인 데이터 링크의 개발을 지양하고 기존체계와의 상호운용 및 단절없는 통신을 보장을 위해 개발과 동시에 국가적 차원에서의 기술구조 표준화가 추진되어야 한다. 이러한 시점에서 본고에서는 먼저 선진국의 (CDL : Commom Data Link) 표준화 동향을 알아보고, 상호운용성과 연동을 위한 한국형 MPI-CDL 기술 표준화방향을 제시하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.2
• /
• pp.205-210
• /
• 2012

For environmental reasons and because of our limited energy resources, high-efficiency power generation technology will be necessary in the future. Ultra-supercritical (USC) power generation technology is the key to managing the greenhouse gas problems and energy resource problems discussed in the Kyoto Protocol to the United Nations Framework Convention on Climate Change. Other countries and manufacturers are trying to build commercial power plants. In this paper, an efficient method of achieving near-zero emission operation of a high-efficiency fossil power plant using USC power generation is discussed. Development of USC power generation in Korea has been supported by the Korean government in two phases: Phase I was USC key technology development from 2002 to 2008, and Phase II is USC development and technology optimization from 2010 to 2017.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.295-303
• /
• 2015

Considering to Energy Storage System (ESS) is a global trend In order to reduce global warming and carbon emissions. South Korea has announced various policies to vitalize the development and uptake of renewable energy. South Korea is planning the cumulative capacity of ESS of two million kW in 2020. According to the government support and development of technology companies, the battery of ESS prices are expected to fall gradually. In this paper, we develop a planning model that take into account the supply expansion of technology of ESS and prices. Based on planning model, we analyze the cost of ESS linked with wind power and the revenue for trading electricity and renewable energy certifications.