• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.327-332
• /
• 2017

As Internet of Things (IoT) technology advances, there is a growing demand for location-based services (LBSs) to identify users' mobility and identity. The initial LBS system was mainly used to measure position information by measuring the phase of a signal transmitted from a global positioning system (GPS) satellite or by measuring distance to a satellite by tracking the code of a carrier signal. However, the use of GPS satellites is ineffective, because it is difficult to receive satellite signals indoors. Therefore, research on wireless communications systems like ultra-wide band (UWB), radio frequency identification (RFID), and ZigBee are being actively pursued for location recognition technology that can be utilized in an indoor environment. In this paper, we propose an LBS system that includes the 2.45GHz band for chirp spread spectrum (CSS), and the 3.1-10.6GHz band and the 250-750MHz bands for UWB using the IEEE 802.15.4a standard for low power-based location recognition. As a result, we confirmed that the 2.45GHz Industrial, Scientific and Medical (ISM) band RF transceiver and the ranging function can be realized in the hardware and has 0dBm output power.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.836-841
• /
• 2016

An indoor positioning system using Wi-Fi is essential to produce a radio map that combines the indoor space of two or more dimensions, the information of node positions, and etc. in processing for constructing the radio map, the measurement of the received signal strength indicator(RSSI) and the confirmation of node placement information counsume substantial time. Especially, when the installed wireless environment is changed or a new space is created, easy installation of the node and fast indoor radio mapping are needed to provide indoor location-based services. In this paper, to reduce the time consumption, we propose an algorithm to distinguish the straight and curve lines of a corridor section by RSSI visualization and Sobel filter-based edge detection that enable accurate node deployment and space analysis using cable-type Wi-Fi node installed at a 3 m interval. Because the cable type Wi-Fi is connected by a same power line, it has an advantage that the installation order of nodes at regular intervals could be confirmed accurately. To be able to analyze specific sections in space based on this advantage, the distribution of the signal was confirmed and analyzed by Sobel filter based edge detection and total RSSI distribution(TRD) computation through a visualization process based on the measured RSSI. As a result to compare the raw data with the performance of the proposed algorithm, the signal intensity of proposed algorithm is improved by 13.73 % in the curve section. Besides, the characteristics of the straight and the curve line were enhanced as the signal intensity of the straight line decreased by an average of 34.16 %.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.835-840
• /
• 2023

RFID(Radio Frequency Identification) systems are attracting attention as a key component of Internet of Things technology due to the cost and energy efficiency of application services. In order to use RFID technology in the IoT application service field, it is necessary to be able to store and manage various information for a long period of time as well as simple recognition between the reader and tag of the RFID system. And in order to read and write information to tags, a performance improvement technology that is strong and reliable in poor wireless channels is needed. In particular, in the UHF(Ultra High Frequency) RFID system, since multiple tags communicate passively in a crowded environment, it is essential to improve the recognition rate and transmission speed of individual tags. In this paper, Middleton's Class A impulsive noise model was selected to analyze the performance of the RFID system in an impulsive noise environment, and FM0 encoding and Miller encoding were applied to the tag to analyze the error rate performance of the RFID system. As a result of analyzing the performance of the RFID system in Middleton's Class A impulsive noise channel, it was found that the larger the Gaussian noise to impulsive noise power ratio and the impulsive noise index, the more similar the characteristics to the Gaussian noise channel.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.3
• /
• pp.82-94
• /
• 2008

Airport GIS is a comprehensive information system to improve security and efficiency of airport. At the initial stage to make it real, the current status of domestic and international regulations along with relevant standardization bas been reviewed. Gimpo Airport becomes a test-bed to get some ideas about how to bring the airport GIS into workflow by building service model and basic design based on current status and demand analysis of the airport. The 6 service models primarily brought into the project are as follows: (1) Local vehicles safety management in airside, (2) Intelligent traffic control between flights and vehicles at main cross points, (3) Dynamic safety management against FOD in airside and breakage on pavement, (4) Special support vehicle management such as deicing remotely controlled, (5) Response and support for fire vehicles and ambulances of signatory institutions in emergency. The upcoming research topic aims at drawing a specific design and building integrated system in the future.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.6
• /
• pp.111-117
• /
• 2009

In the wideband code division access (WCDMA) systems, a pilot channel is used to determine WCDMA network coverage, cell identification, synchronization, timing acquisition and tracking, user-set handoff, channel estimation, and so on. A wireless repeater, which is deployed in the urban area for the WCDMA system to meet the growing demand on wireless communication services, has the possibility to receive several pilot signals from a large number of base stations, however, cannot distinguish its service base station's signal among them. This pilot interference results in frequent handoffs in the user equipment, which degrades the radio reception, transmission efficiency, quality of service, and channel capacity and increases the unwanted power consumption. In this paper, thus, we propose a pilot pollution interference cancellation scheme using one of the adaptive estimation algorithms, normalized least mean square (NLMS), which is applicable to a wireless repeater. We carried out link-level and network-level computer simulations to evaluate the performance of the proposed scheme in a wireless repeater. The simulation results verify the bit error rate (BER) improvement in the link level and the call drop probability improvement in the network level.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.2 s.10
• /
• pp.19-28
• /
• 2006

In the IEEE 802.15.4a system, they require simple, economical and low power consumption transmitter and receiver to transmit low rate data and to identify distance and location. To meet these requirements, LR-WPAN system use transmitter and receiver with simple modulation and demodulation scheme. In this paper, use PPM+BPSK modulation and windowing scheme to overcome multipath fading effect. Then we apply this channel estimation scheme to LR-WPAN system and compare performance depends on transmitter scheme. Proposed method using preamble to find channel characteristic out and we compensate distorted data with that information. Therefore we can detect signal easily at the demodulation part. Simulation result shows that performance evaluation is greater at the NLOS channel than LOS channel no matter what the receiver scheme.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.337-341
• /
• 2008

This paper presents a vibrotactile space mouse which use pin-type vibrotactile display modules and a gyroscope chip. This mouse is a new interface device which is not only an input device as an ordinary space mouse but also a tactile output device. It consists of a space mouse which use gyroscope chip and vibrotactile display modules which have been developed in our own laboratory. Lately, by development of vibrotactile display modules which have small size and consume low power, vibrotactile displays are available in small sized embedded systems such as wireless mouses or mobile devices. Also, development of new sensors like miniature size gyroscope by MEMS technology enables manufacturing of a small space mouse which can be used in the air not in a plane. The vibrotactile space mouse proposed in this paper recognizes motion of a hand using the gyroscope chip and transmits the data to PC through Bluetooth. PC application receives the data and moves pointer. Also, 2 by 3 arrays of pin-type vibrotactile actuators are mounted on the front side of the mouse where fingers of a user's hand contact, and those actuators could be used to represent various information such as gray-scale of an image or Braille patterns for visually impared persons.

• Convergence Security Journal
• /
• v.13 no.5
• /
• pp.57-66
• /
• 2013

Predicting pattern of future combat ensures a successful war. It is possible to anticipate the shape of the future combat from the fighting method of US Army in the Iraq War. The fighting method: a series of combat progress by real time information to pinpoint strike using a guided weapon by GPS, an intelligence satellite and unmanned surveillance vehicle (USV), shows that real time unification combat power is key element for decide outcome of a war. The NCW is an organically connected network centric warfare paradigm by networking a factor of operation. In this paper, studied on the improvement plan for combat power by the future computer like a portable computer, an audio-recognized computer and non-keyboard computer. In addition, this paper attempts to establish a comprehensive intelligence network of Korea Marine Corps and to apply to combat or training.

• Journal of Korean Society of Disaster and Security
• /
• v.9 no.1
• /
• pp.33-38
• /
• 2016

Real time location system was development for safety management at road and bridge maintenance field. The system can check the real-time location detection, movement history, behavior of a number of laborers. The system consisted of a Bluetooth and ZigBee that uses low-power. It had a very large error that the previous method for the position recognition by triangulation using the RSSI. Because This study proposed a new distance measurement and correction scheme using RSSI and accelerometer. It was evaluated in the maintenance field. A development system were evaluated in the field, the results are shown an error between 0.2 m and 0.4 m. And through the acceleration of history it was confirmed by determining possible to determine the safety situation of the laborers.

• The KIPS Transactions:PartC
• /
• v.14C no.2
• /
• pp.185-190
• /
• 2007

The efficient node energy utilization is one of important performance factors in wireless sensor networks because sensor nodes operate with limited battery power. To extend the lifetime of the wireless sensor networks, maintaining balanced power consumption between sensor nodes is more important than reducing each energy consumption of the sensor node in the network. In this paper, we proposed a cluster formation algorithm to extend the lifetime of the networks and to maintain a balanced energy consumption of nodes. To obtain it, we add a tiny slot in a round frame, which enables to exchange the residual energy messages between the base station (BS). cluster heads, and nodes. The performance of the proposed protocol has been examined and evaluated with the NS 2 simulator. As a result of simulation, we have confirmed that our proposed algorithm show the better performance in terms of lifetime than LEACH. Consequently, our proposed protocol can effectively extend the network lifetime without other critical overhead and performance degradation.