• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2194-2200
• /
• 2010

In this paper, the power detectors using metamaterials were designed and fabricated for multi-band six-port direct conversion method. The RF short-stubs for power detector were designed by using metamaterials which provide multi-band characteristics. The power detectors with metamaterial RF short-stub were analyzed and fabricated by using lumped and distributed element. The measured results of metamaterial power detectors show the good agreement with the simulation results. The performance of lumped-metamaterial RF short-stub shows the insertion loss below 1 dB and the good frequency response characteristics. Also, the distributed-metamaterial RF short-stub shows the good frequency response characteristics and the insertion loss under that of lumped-metamaterial RF short-stub. The multi-band power detectors with metamaterial RF short-stub detect the input RF signal in the designed dual frequency bands very well.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.4 s.32
• /
• pp.185-189
• /
• 2004

In this paper, designed a diode detector and a log chip detector for mobile communication, and its application is proposed by compared results. In practice, fabricated a diode detector have showed detection voltage of $0{\sim}0.7V$ to RF input power of $-40dBm{\sim}-10dBm$, therefore it has suitable characteristic for small variable signal detection. And a log chip detector have showed wide dynamic range of 65dB, and $1.5{\sim}4.5V$ detection voltage to RF input power of $-65dBm{\sim}0dBm$. therefore we have found that it suit peak power measurement because it had insensible output detection voltage.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.11
• /
• pp.22-27
• /
• 2011

In spectrum sensing, an energy detector compares the energy of a received signal with a predetermined detection threshold and decides whether a primary user is active or not in a licensed frequency band. Here the detection threshold is related to the noise power level in the band. Most previous works on energy detection have assumed that the noise power is exactly known a priori. However, this assumption does not hold in practice since there may be some uncertainty about the noise power. So it is necessary to investigate its effects on the performance of energy detection for spectrum sensing. In this paper, we analyze the effects using the residue theorem for contour integral and present the associated numerical results.

• Journal of Advanced Navigation Technology
• /
• v.13 no.3
• /
• pp.385-392
• /
• 2009

Simplified minimum mean square error (MMSE) detection technique combined with soft interference cancellation(SoIC) is proposed for iterative receivers in multiple antenna systems. To avoid repeated matrix inversions required to obtain the MMSE filter coefficients during the iteration between the soft detector and decoder, simplified matrix inversion techniques are applied to calculate the filter coefficient matrix. Simulation results show that the proposed MMSE detections with SoIC indicate a comparable or slightly degraded detection performance while achieving a significantly reduced complexity as compared to the conventional MMSE detection with SoIC.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.4 s.334
• /
• pp.1-6
• /
• 2005

For the low power and low cost transceivers, direct sequence spread spec01m frequency-shift keying (DSSS-FSK) is proposed. A transmitter of the DSSS-FSK signal can be implemented by a simple direct modulation using the phase locked loop. Since the DSSS-FSK signal has negligible power around the carrier frequency, low cost direct conversion receiver can be used. Optimum coherent and semi-coherent correlation detection methods for the DSSS-FSK signal are proposed and analyzed. Segmented semi-coherent correlation detection method is proposed to improve the bit error rate performance in the large carrier frequency offset.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.37-37
• /
• 2004

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.549-552
• /
• 2000

본 논문에서는 주파수 영역 배열안테나의 계산량을 감소시키기 위한 센서링 부분적응 알고리듬을 제안한다. 제안한 알고리듬은 입력신호를 주파수 영역으로 변환한 후 CFAR(constant false alarm rate) 검파기법을 이용하여 간섭신호가 존재하는 주파수 대역을 찾아내고 이에 해당하는 가중치에 대해서만 적응 신호처리를 수행한다. 이때 CFAR 검파기의 오경보율은 출력신호의 전력 변화량을 이용하여 환경에 맞게 적응적으로 변화시켜서 최적 값으로 설정한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.1016-1023
• /
• 1998

DS-CDMA system requeires a power-efficient transmission and reception scheme to increase capacity. In this paper, coherent detection of DS-CDMA system with M-ary orthogonal signaling is considered, and multistage decision-directed channel estimator is proposed. The multistage decision-directed channel estimator is based on the fact that better channel estimation can be obtained by using the final decisions of the detector with a conventional decision-directed channel estimator. In this scheme, symbol detector and channel estimator operate algernaely. by simulation, it is shown that the proposed method achieves performance gain capare to conventional method, specially at low signal to noise ratio over fast time-variant channel with diversity.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.04a
• /
• pp.595-598
• /
• 2000

본 논문에서는 간섭을 제거하기 위해 MMSE 다중사용자 검파기를 사용하여 성능을 분석하고, 가우시안 채널과 페이딩 채널 환경하에서 비동기식으로 전송된 다중 사용자 신호와 수신전력을 설정하고 컴퓨터 시뮬레이션을 통해 전력제어에 따른 BER을 줄이고 연속적인 간섭을 제거하고 이에 따른 지연 시간 문제와 시스템의 복잡도를 동시에 연구하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.11
• /
• pp.1095-1102
• /
• 1991

In this paper, we proposed the differential demodulation technique of 2-h CPM and analyzed its error performances. We derived the sets of modulation indices of 2-h phase codes adequate to the differential detection. The power spectra of 2-h CPM signals with various sets of mudulation indices are illustrated and compared, Besides, the error performances for the differential detectors are calculated and detectors using Viterbi algorithm are compared and analyzed by computer simulations.