• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.5
• /
• pp.47-52
• /
• 2011

We studied about the damaged tire decision algorithm that measured dominant period of ultrasonic signal due to a foreign material on the friction between tire and road surface. We computed the power spectrum about the envelope of ultrasonic signal acquired from the damaged tire, then proposed the dominant period decision algorithm by statistical power threshold value. As the result of simulation, when driving by the speed of 80km/h, the 100ms of dominant period that measured in the proposed algorithm is more accurate than the 97.6ms of power spectrum peak period referenced on the average period of ultrasonic signal envelope peak, 101.24ms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.815-820
• /
• 1998

A new coding algorithm which has spectrum notches at the DC and Nyquist Frequency for maximizing the effect of the in-band pilot insertion in order to make the symbol timing or carrier recovery easy is proposed. It is shown that this algorithm uses one encoder and gives the similar spectrum characteristics to that of the existing OF00 code which uses two encoder. In this paper, the proposed new coding algorithm is explained andits spectrum characteristics is compared with the of OF00 code using computer simulation.

• Journal of Advanced Navigation Technology
• /
• v.5 no.1
• /
• pp.54-61
• /
• 2001

In conventional Ultra Wide Band(UWB) system, it uses Pulse Positioning Modulation Method to modulate data signal. In this paper, however, we derive power spectral density characteristic of time hopped antipodal signal using stochastic process. UWB signal employes Gaussian monopulse and Rayleigh monopulse which pulse width is 0.5 nsec and interval is 5 nsec. But comb line which produces unintentionally could be evidently reduced by the time hopped code, so this code be used to channelize for multiple access and minimize to different communication system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.5
• /
• pp.501-507
• /
• 2005

This paper proposes a Hybrid Random PWM(HRPWM) technique using a LF2407 DSP board in order to spread the power spectra of an induction motor. The proposed method is composed to the PRBS (Pseudo-Random Binary Sequence) with the Lead-Lag random bit and the random triangular carrier for the logical comparison. Also, a DSP generates the random number, the PRBS and the three-phase reference signal, a MAX038 chip operating as frequency modulator generates the random triangular carrier. For verification of the proposed method, the experiments were conducted with a three-phase adjustable speed a.c drives, and the results of simulations and experiments are presented.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.189-191
• /
• 2005

본 연구는 Z-source 인버터롤 단상 능동전력필터에 적용하여 전원 측 고조파 전류를 보상하기 위한 방법을 제시하였다. Z-source 능동전력필터는 연료전지를 dc전원으로 하고 있으며, 단상 p q이론에 의해 보상기준전류가 연산된다. PSIM 시뮬레이션에 의하여 제안된 방법의 보상성능을 확인하였으며, 부하전류와 전원전류에 대한 파형 및 스펙트럼을 비교 검토하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.2 s.332
• /
• pp.75-80
• /
• 2005

In this paper, 2-stage power amplifier has been designed for 5.8GHz wireless LAN application. The power amplifier PldB output power has 21.6dBm at 5.8GHz frequency. Also the power amplifier shows 17.6dB gain and -17.8dB input return loss at 5.725GHz to 5.825GHz. The OFDM modulation and transmission block have been modeled in order to analyse the relationship between the power amplifier distortion and output ACPR for the IEEE 802.11a wireless LAN. The nonlinear characteristic of the power amplifier has been modeled as AM-to-AM and AM-to-PM using the behavioral model, and the output spectrum is analysed with the phase distortion variation. Also, amplifier back-off value from PldB to satisfy the required IEEE 802.11a standard spectrum mask has been simulated with phase distortion, and the simulation data have been compared to the measurement result collected by using the pre-distortion technique.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.6
• /
• pp.217-225
• /
• 2021

In this study, wave spectrum data were calculated using the water surface elevation data observed at 5Hz intervals from the HeMOSU-2 meteorological tower installed on the west coast of Korea, and wave parameters were estimated using wave spectrum data. For all significant wave height ranges, the peak enhancement parameter (γ_opt) of the JONSWAP spectrum and the scale parameter (α) and shape parameter (β) of the modify BM spectrum were estimated based on the observed spectrum, and the distribution of each parameter was confirmed. As a result of the analysis, the peak enhancement parameter (γ_opt) of the JONSWAP spectrum was calculated to be 1.27, which is very low compared to the previously proposed 3.3. And in the range of all significant wave heights, the distribution of the peak enhancement parameter (γ_opt) was shown as a combined distribution of probability mass function (PMF) and probability density function (PDF). In addition, the scale parameter (α) and shape parameter (β) of the modify BM spectrum were estimated to be [0.245, -1.278], which are lower than the existing [0.300, -1.098], and the result of the linear correlation analysis between the two parameters was β = -3.86α.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.155-158
• /
• 2005

산업현장에서 많이 사용되고 있는 전력기기에 결함이 발생하면 치명적인 사고로 진전되어 경제적, 인적 손실이 발생될 수가 있다. 본 논문은 GIS에 사용되는 절연가스인 $SF_6$의 압력 변화에 따른 부분 방전을 모의하고, 발생되는 부분방전 신호를 절연 진단 방법 중 하나인 UHF법을 이용하여 부분방전 시 방사되는 방사전자파의 스펙트럼을 분석해 금속이물질이 $SF_6$가스 부분방전에 미치는 영향을 측정하였다. 이러한 연구는 현장 GIS 및 $SF_6$ 가스절연 전력설비에서 내부압력 변화 시 금속이물질에 의해 발생되는 절연파괴 사고의 방지에 중요한 역할을 할 것으로 사료된다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.7
• /
• pp.32-41
• /
• 1999

In this study, a new knocking control algorithm was developed using the knock threshold value auto-correction algorithm. This algorithm uses the Fast Fourier Transform9FFT) method by measuring cylinder block vibration signals of a 1498 cc four-cylinder spark ignition engine. The experimental results show the proposed knock control algorithm provides improved performance compared to existing methods. The results also show that the proposed FFT algorithm provides real-time adjustment of the knock threshold value.

• Journal of Korean Ophthalmic Optics Society
• /
• v.4 no.1
• /
• pp.15-20
• /
• 1999

Visible light spectrum emitted from $H_2$ plasma in the parallel plate reactor using a commercial electric power are investigated by optical emission spectroscopy. Intensity of visible light is measured as a function of $H_2$ pressure and discharging power, and the intensity is compared with plasma density measured with the probe. As a result, the intensity is affected by plasma density and the plasma density is controlled the $H_2$ pressure and the discharging power.