• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.2
• /
• pp.175-184
• /
• 1996

In this paper the newly developed discrete-time adaptive sliding mode control method is proposed and applied to the power system stabilization problem. In contrast to the conventional continuous-time sliding mode controller, the proposed method is developed in the discrete-time domain and based on the input/output measurements instead of the continuous-time and the full-states feedback, respectively. Because the proposed control method has the adaptivity property in addition to the natural robustness property of the sliding mode control, it is possible to design the power system stabilizer which can overcome both the minor variations of the parameters of the power system and the diverse operating conditions and faults of the power system. Mathematical proof and the various computer simulations are done to verify the performance and stability of the proposed method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.8
• /
• pp.114-121
• /
• 2011

This paper, as the second part of the paper, dealt with the field test and test results to validate PSS(Power System Stabilizer) parameters which are previously tuned in Part 1 paper. In Part 1 of the paper, the selection of parameters such as lead-lag time constants for phase compensation and system gain was optimized by using linear & eigenvalue analyses and they were verified through the time-domain transient stability analysis. In part 2, the performance of PSS was finally verified by the generator's on-line field test. Through the comparisons of simulation results and measured data before and after tuning of the PSS, the models of generator and its controllers including AVR, Governor and PSS used in the simulation are verified and confirmed.

• Plant Journal
• /
• v.17 no.4
• /
• pp.35-40
• /
• 2021

In this study, a technical characteristic test was conducted on the gas turbine generator system of Seoincheon Combined cycle no.6 to derive and verify the model constants. As a result of the generator maximum/minimum reactive power limit test, the maximum reactive power limit is 80 MVar and the minimum is -30 MVar. The generator uses the GENROU model, the field time constant (T'do) is 4.077 s, and the inertial constant (H) is 5.461 P.U. Excitation system used ESST4B model to derive and verify model constants by simulating no-load 2% AVR step test, PSS modeling derived from PSS2A model constants, and simulated and compared measurement data measured when PSS off/on Did. The GGOV1 model was used for the governor-turbine, and the numerical stability of the determined governor-turbine model constant was verified by simulating a 10% governor step test through the PSS/E simulation program

• Journal of Convergence for Information Technology
• /
• v.9 no.1
• /
• pp.68-73
• /
• 2019

This study is the central axis of the MG (Micro-Grid) configuration and it has the link through the modular hybrid power source and the DC bus, and it provides the function to detect and block the illegal connection by using the standard socket, And to achieve stabilization. Development of power conversion device, smart distribution panel, integrated control system and efficient demand management are required, and compatibility with MG whole system is urgent. This is a hybrid power generation system that is safe with a common power connection protocol and can be easily connected to anyone. This makes it easy to manage data and prepare for expansion of various manufacturers' systems.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2001.11a
• /
• pp.65-72
• /
• 2001

Power system stabilizer act efficiently to damp the electromechanical oscillations in interconnected power systems. This paper presents an algorithm for the optimal parameter selection of a power system stabilizer in two-area power systems with a series HVDC link. This method is one of the classical techniques by allocating properly pole-zero positions to fit as closely as desired the ideal phase lead between the voltage reference and the generator electrical power and by changing the gain to produce a necessary damping torque over the matched frequency range. Control of HVDC converter and inverter are used a constant current loop. Proper parameters of PI controllers are obtain based on the Root-locus technique in other to have sufficient speed and stability margin to cope with charging reference values and disturbance. The small signal stability arid transient stability studies using the PSS parameters obtained from this method show that a natural oscillation frequency of the studycase system is adequately damped. Also the simulation results using the HVDC converter and inverter parameters obtained from this proposed method show proper current control characteristics. The simulation used in the paper was performed by the Power System Toolbox software program based on MATLAB.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.9
• /
• pp.441-450
• /
• 2002

In this paper, optimal tuning problem of power system stabilizer using IA-QFT is investigated to improve power system dynamic stability in spite of parameter variation and disturbance uncertainties. The most important feature of QFT is that it is able to deal with the design problem of complicated uncertain plants. However, loop shaping is currently performed in computer aided design environments manually and it is usually a trial and error procedure. It is difficult to design a controller to satisfy all specifications manually. To solve this problem, a study of design automation using IA needs to be taken into account. The robustness of the proposed controller has been investigated on a single machine infinite bus model. The results are shown that the proposed PSS using IA-QFT is more robust than conventional PSS.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.274
• /
• pp.66-71
• /
• 1999

최근 사업용 화력발전설비의 건설에서는 이제까지의 실적 중시 시스템구축 경향에서 벗어나, 적은 인원에 의한 중앙집중감시의 고도화와 건설비저감 경향에 따라 신기술 특히 디지털기기의 응용을 지향한 주요 전기기기의 합리화가 급속하게 추진되고 있다. 또 제어로직의 소프트웨어화, 신호 전송화의 확대는 설비의 고도화$\cdot$합리화의 양면에서 우위를 차지하고 있다. 사업용 화력발전설비는 고신뢰성과 고가동률이 요구되어 전력의 안정공급에 있어 중핵을 담당하고 있다. 발전기와 여자제어장치, 발전소 감시제어시스템은 발전소단위의 고기능화, 전력계통 안정화를 위한 협조제어 등에 있어서 중요한 역할을 담당하고 있다. 화력발전소의 감시는 적은 인력을 중앙에 집중 배치하여 일괄감시$\cdot$제어하는 경향이 확산되어, 감시$\cdot$조작$\cdot$이력관리 기능의 고도화와 작업환경의 정비가 급속하게 진전되고 있다. 여기에는 적어도 최근의 디지털기기 응용확대가 크게 기여했으며, 이러한 것들이 신뢰성을 확보한 토털시스템 구축이라는 발전소 시스템 엔지니어링의 영역확대와 중요성이 커지게 된 요인이라고 할 수 있다. 화력발전소 제어시스템의 고도화는 주요기기의 안정된 운전과도 깊이 관련되어있어 근년의 발전설비 건설에서 중요한 과제의 하나가 되고 있다. 한편, 화력발전소의 감시$\cdot$제어항목은 방대하며, 아울러 급속히 진보해가고 있는 디지털기술을 효율적으로 도입하여 설비의 고도화를 추진해갈 필요성이 날로 커져가고 있다고 생각한다. 여기서는 최근의 발전기의 기술동향과 감시제어시스템의 기술동향을 소개함과 동시에 앞으로의 전망에 대하여 기술한다.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.229-231
• /
• 2005

This paper presents the nonlinear $H_{\infty}$ switching power system stabilizer (PSS) based on Lie group and Lie transformation theory. The proposed controller combines the $H_{\infty}$ switching controller and Lie theory. The proposed power system stabilizer (PSS) is used to improve the transient stability in the time-domain and to solve the problem associated with the inaccessible state variables by measuring only the angular velocity. In the simulation study, the different load conditions, fault periods, and fault locations are considered. The nonlinear time-domain simulation showed that the proposed controller was effective restoring transient stability in a one-machine infinite-bus power system.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.87-89
• /
• 2005

This paper proposes new series and parallel Sin+Cos PSS(power system stabilizer) for the purpose to improve the existing PSS1A's performance. The purpose of PSS is used to enhance damping of power system oscillations through injection of auxiliary signal for an excitation control terminal. The Proposed series and Parallel Sin+Cos PSS is connected adding the Sin+Cos terms additionally with serial and with parallel connection in a conventional PSS1A. The proposed controller is aim to considering of a damping of oscillation when it changes parameter fluctuations or operational load variations in a power system. The object of electric power system is KEPCO system and the voltage of power transmission line is a 154kV and a 345kV. The PSCAD/EMTDC package is used to authorize the effect of the proposed controller. Simulations were shown by and compared with the waveforms for frequency, voltage and electric power.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.187-189
• /
• 2000

In this paper, QFT robust control strategy is proposed to improve stability of power systems in the presence of parametric uncertainty. The basic idea in QFT is to convert design specifications of a closed loop system and plant uncertainties into robust stability and performance bounds on the open loop transmission of the nominal system and then to design a controller by using the gain-phase loop sharing technique. The robustness of the QFT controller has been investigated on a single machine infinite bus model by nonlinear simulations.