• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.336-337
• /
• 2018

전력 전자 시스템 내의 전도성 노이즈는 반도체 스위칭 소자의 고속 동작에 큰 영향을 받는다. 특히 실리콘 카바이드 (SiC) 등의 신소재 반도체 소자 (wide band-gap device, WBG device) 특유의 고속 dv/dt 특성이 전력전자모듈 (power electronics module, PEM) 내의 기생 용량 (parasitic capacitance)에 인가될 경우 상당한 전도성 노이즈의 원인이 되므로 이를 해결할 필요가 있다. 본 논문에서는 유전율이 낮은 재료를 PEM 내부에 사용함으로써 기생 용량을 줄이고, 따라서 공통 모드 전류의 발생 또한 최소화할 수 있는 설계를 제안한다. 제안된 PEM 설계 기법은 외부 필터를 필요로 하지 않으며, PEM 내의 스위칭 소자-방열 소자간 열저항 (thermal resistance)를 증가시키지 않으면서도 기생 용량을 최소화하여 노이즈를 억제한다. 제안된 방법으로 제작된 PEM을 1 kW 출력 100 kHz 스위칭 주파수의 강압형 dc-dc 컨버터에 적용하여 공통모드 전도성 전류가 줄어듬을 증명하였다.

• Journal of the Korean Magnetics Society
• /
• v.9 no.1
• /
• pp.55-63
• /
• 1999

It is necessary to eliminate the broad band noise whose frequency is in the range of several kHz to tens MHz generated from the AC power line to supply the power to electrical and electronic equipments. Because this kind of noise could damage or malfunction such equipments. To suppress those noises, some conventional devices such as a filter or surge suppressor have been used. However, they can not be isolated from the common-mode noise widely spreaded in all power line, which results in poor common-mode rejection performance. In this paper, we proposed a design method of shielded isolation transformer and a jumped circuit analysis model for shielded isolation transformer applicable to filtering common-mode noise as well as normal-mode noise. The analysis model has been verified as a suitable one for shielded isolation transformer through comparison of the simulation with experiment. In addition, it has been shown that the reduction performance for conducted noise of prototype 3 kVA shielded isolation transformer is superior to a unshielded isolation transformer.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2004.12a
• /
• pp.83-84
• /
• 2004

• Proceedings of the Korean Magnestics Society Conference
• /
• 2005.06a
• /
• pp.36-37
• /
• 2005

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.407-409
• /
• 2006

우주발사체I 상단 시스템은 비행 중에 킥 모터 점화, 위성분리와 같은 HBW 점화기 기폭이 순차적으로 발생 한다. HBW 점화기의 기폭시에는 일반적으로 전도성 구조물을 통한 단락전류가 일시적으로 발생한다. 이러한 단락전류는 구동 전원 측으로 최대 전류 값 및 루프 면적에 비례한 일시적인 자기장을 형성시키고 near 필드(${\lambda}/2{\pi}$) 내의 인접하게 위치한 하니스에 자계 결합을 통한 역기전력 발생의 원인이 될 수 있다. 이러한 인접 하니스에 자계 노이즈 결합은 여러 자료를 통해 우주시스템 환경에서 일시적인 데이터 손실의 원인이 되는 것으로 분석되고 있다. 본 논문은 우주발사체의 HBW 점화기 기폭시 발생되는 전도성 구조물 단락전류 귀환현상으로 인한 자계노이즈 분석 및 감쇄방안에 대해 논의하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.2 no.1
• /
• pp.53-58
• /
• 2001

The main noise sources in SMPS are divided into three parts: the switching devices, the rectifiers in secondary part, the output transformer and choke coil. In this paper we performed the noise analysis with respect to bobbin type and winding method, and designed an optimized transformer focusing on the transformer. For the comparison. we measured four parameters for each cases, including EMI conducted emission noise. signal from the switching devices, output ripple/noise voltage and leakage current. As the result, the transformer using a vertically-typed bobbin and a parallel, sandwich winding method showed the best performance. We confirmed that the SMPS developed in this research is satisfied with the IEC 601-1 international standard for the medical instrumentation. by testing its electrical characteristics and safety.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.235-240
• /
• 2020

This study evaluated the improvements for circuits of a combat vehicle distribution box to reduce the noise generated in electromagnetic compatibility (EMC) testing. An analysis of the distribution boxes that failed the standard revealed the conducted noise generated from the converter and semiconductor switching elements on the circuit board. The distribution box transfers power from the generator and battery to the cooling system of a combat vehicle to keep turning the air conditioner on and off. Two methods were proposed to overcome this problem: a passive filter was added to the circuit board for the first method, and the converter and switching elements were replaced with the relays for the second method. Both methods were effective in reducing noise, but a greater improvement was obtained from the second method. The second method was applied to a combat vehicle system and was found to be suitable according to the EMC standards.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.4
• /
• pp.313-320
• /
• 2003

This paper deals with the optimal design of a elevator inverter system based on the customized IPM. The proposed method reduces dv/dt and di/dt, which resulted in the minimized conducted EMI noise without an additional circuitry. It only optimizes the value of gate resistor in the IGBT embedded in the IPM. In order to optimize the customized IPM to a elevator system, we simulated and measured the spike voltage and the motor surge voltage including the temperature variation due to the switching losses at the IPM case and heat-sink. As a result, thanks to the optimized value of the gate resister in the IPM, the conducted EMI noise is reduced approx. 5∼10 [dB$\mu$V] in a particular frequency domain.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.436-447
• /
• 2013

In this paper, Integrated circuit(IC) electromagnetic(EM) conducted immunity measurement and simulation using bulk current injection(BCI) and direct power injection(DPI) methods were conducted for 1.8 V I/O buffers. Using the equivalent circuit models developed for IC electromagnetic conducted immunity tests, we investigated the reliability of the frequency region where IC electromagnetic conducted immunity test is performed. The insertion loss for the noise injection path obtained from the simulation indicates that using only one conducted immunity test method cannot provide reliable conducted immunity test for broadband noise. Based on the forward power results, we analyzed the actual amount of EM noise injected to IC. We propose a more reliable immunity test methods for broad band noise.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.286-291
• /
• 2000

본 논문에서는 일반적인 EMI 노이즈 개요 및 SMPS(Switching Mode Power Supply)에서의 Noise 발생 메카니즘을 분석하고, 전도성 Noise를 측정하였으며, SMPS에서 발생되는 잡음행태를 분석하여 대책방법을 연구하였다.