• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.1
• /
• pp.75-84
• /
• 2015

This study was conducted to investigate the effects of high temperature and drought on growth performance, photosynthetic parameters and photosynthetic pigment contents of Liriodendron tulipifera L. seedlings. The seedlings were grown in controlled-environment growth chambers with combinations of four temperature ($-3^{\circ}C$, $0^{\circ}C$, $+3^{\circ}C$, $+6^{\circ}C$; based on the monthly average for 30 years in Korea) and two water status (control, drought). Temperature rise increased growth, total dry weight and leaf area in all water status. Also photosynthetic rate, dark respiration, stomatal conductance and transpiration rate increased with increasing temperature. In contrast, growth and photosynthetic parameters of L. tulipifera seedlings were lower in $-3^{\circ}C$ than $0^{\circ}C$. But temperature rise decreased water use efficiency in all water status. Temperature rise increased photosynthetic pigment contents of leaf. Also chlorophyll a/b ratio increased with increasing temperature. In conclusion, the elevated temperature lead to causes growth increase through the increase of energy production by higher photosynthetic rate during a growth period of L. tulipifera seedlings.

• Composites Research
• /
• v.28 no.6
• /
• pp.333-339
• /
• 2015

Electromagnetic interference shielding composite with low density ($1.18g/cm^3$) was fabricated using electroless plated FeCo magnetic metal hollow fibers and ethylene propylene diene monomer (EPDM) polymer. Aspect ratio of the fibers were controlled and their hollow structure was obtained by heat treatment process. The FeCo hollow fibers were then mixed with EPDM to manufacture the composite. The higher aspect ratio of the magnetic metal hollow fibers resulted in high electromagnetic interference shielding effectiveness (30 dB) of the composite due to its low sheet resistance (30 ohm/sq). The enhanced electromagnetic interference shielding effectiveness was mainly attributed to the formation of conducting network over the percolation threshold by high aspect ratio of fibers as well as an increase of the reflection loss by impedance mismatch owing to low sheet resistance, absorption loss, and multiple internal reflections loss.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.72-72
• /
• 2000

ITO(Indium-Tin-Oxide)는 n-type 전도 특성을 갖는 산화물 반도체로서 가시광 영역에서의 높은 광투과율 및 낮은 전기 비저항을 나타내기 때문에 태양전지, 액정디스플레이(liquid crystal display), 터치스크린(touch screen) 등의 투명전극 재료, 전계 발광(electroluminescent) 소자, 표면발열체, 열반사 재료 등 다양한 분야에 응용되고 있다. 본 연구에서는 타겟 제작에 드는 비용을 줄이고, 타겟 이용의 효율성을 높이기 위해 기존의 세라믹 타겟 대신 분말 타겟을 사용하여 유리 기판 상에 ITO 박막을 DC magnetron sputtering법에 의해 제조하고, 열처리 온도 및 열처리 분위기에 따른 ITO 박막의 전기적 광학적 특성을 조사하였다. 열처리 온도가 10$0^{\circ}C$이하인 경우 열처리하지 않은 시편과 동일하게 In2O3의 (411)면에 해당하는 peak가 관찰되었다. 그러나 20$0^{\circ}C$의 온도로 열처리 할 경우 (411)면 peak의 세기는 상대적으로 감소하고 대신 이전에 나타나지 않았던 (222)면에 대응하는 peak 세기가 현저하게 증가함을 알 수 잇다. 이것은 ITO 박막의 경정성장이 열처리 전 (411)면 방향으로 이루어지나 20$0^{\circ}C$의 온도로 열처리 후 재결정화에 의해 (222)면 방향으로의 우선방위를 갖고 성장함을 의미한다. 또한 주로 높은 기판온도에서 관찰되었던 (211), (400), (411), (440), (622)면 등에 해당하는 peak가 나타남을 볼 수 있었다. 열처리 온도를 더욱 증가시킴에 따라 결정구조에는 큰 변화 없이 (222)면 peak 세기가 증가하였다. 한편 열처리 온도를 더욱 증가시킴에 따라 (222)면 peak 세기가 상대적으로 조금 감소할뿐 XRD회절 결과에는 큰 변화를 관찰할 수 없었다. 이러한 결과로부터 기판을 가열하지 않고 증착한 ITO 박막의 재결정화에 필요한 최소의 열처리 온도는 20$0^{\circ}C$이며, 그 이상의 열처리 온도는 ITO박막의 결정구조에 큰 영향을 미치지 않음을 알 수 있었다. 열처리 전 비저항은 1.1$\times$10-1 $\Omega$-cm 의 값을 가지거나 10$0^{\circ}C$의 온도로 열처리함에 따라 9.8$\times$102$\Omega$-cm 로 약간 감소하였다. 열처리 온도를 20$0^{\circ}C$로 높임에 따라 비저항은 급격히 감소하여 1.7$\times$10-3$\Omega$-cm의 최소값을 나타내었다. 열처리 온도가 10$0^{\circ}C$인 경우 가시광 영역에서의 광투과율은 열처리하지 않은 시편과 비교해 볼 때 약간 증가하였다. 열처리 온도는 20$0^{\circ}C$로 증가시킴에 따라 투과율은 크게 향상되어 흡수단 이상의 파장영역에서 90% 이상의 투과율을 나타내었다. 이러한 광투과율의 향상은 앞서 증착된 ITO 박막이 열처리 중 재결합에 의해 우선 성장 방위가 (411)면 방향에서 (222)면 방향으로 변화되었기 때문으로 생각된다. 그러나 열처리 온도를 20$0^{\circ}C$이상으로 증가시켜도 광투과율은 큰 변화를 나타내지 않았다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.76-76
• /
• 2000

최근 비정질 SiC 박막은 열과 광안정도면에서 비정질 Si 박막에 비해 우수하며 공정변수들을조절함으로써 비교적 쉽고 다양하게 광학적.전기적 특성을 얻을 수 있고, 낮은 광흡수계수 및 105($\Omega$cm)1 이상의 높은 전도도를 가지고 있어 Plasma Enhanced Chemical Vapor Deposition(PECVD)을 통해 가전자제어 (Valency electron control)가 가능한 비정질 SiC 박막이 제작된 이래 대한 많은 연구가 진행되고 있다. 결정성이 없는 비정질 물질은 상대적으로 낮은 온도에서 성장이 가능하며, 특히 glow-sidcharge 방식으로 저온에서 성장시킬 수 있음에 따라 유리등과 같은 다른 저렴한 물질을 기판으로 이용, 넓은 면적의 비정질 SiC 박막을 성장시켜 여러 분야의 소자에 응용되고 있다. 비정질 SiC 박막이 넓은 에너지띠 간격을 갖는 물질이라는 점과 화학적 안정성 및 높은 경도, 비정질성에 기인한 대면적 성장의 용이성 등의 장점이외에, 원자의 성분비 변화에 의해 에너지띠 간격(1.7~3.1eV)을 조절할 수 있다는 점은 광전소자의 응용에 큰 잠재성이 있음을 나타낸다. PECVD 방식으로 성장된 비정질 SiC 박막은 태양전지의 Window층이나 발광다이오드, 광센서, 광트랜지스터 등에 응용되어 오고 있다. 본 연구에서는, RF-PECVD(ULVAC CPD-6018) 방법에 의하여 비정질 Si1-xCx 박막을 2.73Torr의 고정된 압력에서 RF 전력(50~300W), 증착온도(150~30$0^{\circ}C$), 주입 가스량 (SiH4:CH4)등의 조건을 다양하게 변화시켜가며 증착된 막의 특성을 평가하였다. 성장된 박막을 X-ray Photoelectron Spectroscopy(XPS), UV-VIS spectrophotometer, Ellipsometry, Atomic Force Microscopy(AFM)등을 이용하여 광학적 밴드갭, 광흡수 계수, Tauc Plot, 그리고 파장대별 빛의 투과도의 변화를 분석하였으며 각 변수가 변화함에 따라 광학적 밴드갭의 변화를 정량적으로 조사함으로써 분자결합상태와 밴드갭과 광 흡수 계수간의상관관계를 규명하였고, 각 변수에 따른 표면의 조도를 확인하였다. 비정질 Si1-xCx 박막을 증착하여 특성을 분석한 결과 성장된 박막의 성장률은 Carbonfid의 증가에 따라 다른 성장특성을 보였고, Silcne(SiH4) 가스량의 감소와 함께 박막의 성장률이 둔화됨을 볼 수 있다. 또한 Silane 가스량이 적어지는 영역에서는 가스량의 감소에 의해 성장속도가 둔화됨을 볼 수 있다. 또한 Silane 가스량이 적어지는 영역에서는 가스량의 감소에 의해 성장속도가 줄어들어 성장률이 Silane가스량에 의해 지배됨을 볼 수 있다. UV-VIS spectrophotometer에 의한 비정질 SiC 박막의 투과도와 파장과의 관계에 있어 유리를 기판으로 사용했으므로 유리의투과도를 감안했으며, 유리에 대한 상대적인 비율 관계로 투과도를 나타냈었다. 또한 비저질 SiC 박막의 흡수계수는 Ellipsometry에 의해 측정된 Δ과 Ψ값을 이용하여 시뮬레이션한 결과로 비정질 SiC 박막의 두께를 이용하여 구하였다. 또한 Tauc Plot을 통해 박막의 optical band gap을 2.6~3.7eV로 조절할 수 있었다.

• Journal of Animal Environmental Science
• /
• v.15 no.2
• /
• pp.161-170
• /
• 2009

This experiment was conducted to investigate the effects of compost leachate and concentrated pig slurry on growth of pepper in substrate hyrdoponic culture. In process of composting, compost leachate was was through a saturated compost heap. Pig slurry was filtered by ultra filtration and concentrated by reverse osmosis process. The pig slurry was mixed with chemical nutrient solution and byproduct based on nitrogen content. Peppers were grown in the seven different hydroponic solutions; compost leachate (CL), concentrated pig slurry (CS), compost leachate + byproduct (CL+BP), concentrated pig slurry + byproduct (CS+BP), compost leachate 50% + nutrient solution 50% (CL+NS), concentrated pig slurry 50% + nutrient solution 50% (CS+NS) and chemical nutrient solution for pepper. The chemical nutrient solution was the standard solution of National Horticulture Research Station for the growth of pepper. The concentration of nutrient solution was adjusted $1.6{\sim}2.0mS/cm$ in EC. The compost leachate and concentrated pig slurry were low in phosphorus (P), calcium (Ca), magnesium (Mg), but rich in potassium (K). Growth characteristics as affected by the different nutrient solution were significantly different. Growth and fruit characteristics treated with CL 50+NS 50%CS and 50+NS 50% were similar with NS 100% control plot. The dry weight of stem and leaf were 107.4, 104.2g in plot of NS 100% and CS 50%+NS 50%, respectively. The fruit of pepper showed lowest in the plot treated with 100% concentrated pig slurry, and the growth of pepper severely decreased after application of 100% CS treatment. The yield of pepper was not significantly different between the plots treated with mixture of CS50 + NS50% and 100% nutrient solution treatment. Fruit yield of the compost leachate concentrated pig slurry plot were 59, 14% compared to control, repectively. In conclusion, the mixture solution of 50% of pig slurry and 50% of nutrient solution could be used as a nutrition solution of pepper in hydroponic culture.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.46-46
• /
• 2015

강우가 지역별 계절별로 편중되어 있는 우리나라는 수자원의 안정적인 확보와 이용을 위해 다양한 형태의 댐을 건설하여 운영하고 있다. 그러나 대부분의 댐건설을 통해 형성된 저수지들은 탁수 장기화 및 녹조 발생 등의 환경, 생태적인 문제를 겪고 있으며, 그에 따른 사회적 우려로 인해 신규댐 건설을 통한 수자원확보는 더 이상 어려운 실정이다. 이러한 문제에 대응하기 위한 대안으로 기존 댐 저수지들(안동호-임하호)의 구조적 연계운영방안이 진행되고 있다. 본 연구의 목적은 2차원 CE-QUAL-W2모형을 활용하여 안동호와 임하호의 구조적 연결에 따른 탁수의 이동과 각 저수지 내에서의 유동 변화를 해석하는데 있다. 저수지 연계 시나리오는 EL. 138 m 위치에 길이 2 km, 직경 5.5 m 의 콘크리트관(마찰계수 0.05)이 안동호 좌안인 임동면 마리와 임하호 우안 망천리를 연결하는 것으로 가정하였다. 모델의 보정은 실측자료가 풍부한 2006년도 수문사상을 대상으로, 개별 저수지에 대해 수행하였고, 탁수 유동 시나리오 해석은 임하호에 심각한 탁수장기화 문제가 발생했던 2002년을 대상으로 댐 연계 탁수모의를 수행하였다. 안동호와 임하호의 댐 앞에서 모의값과 실측값을 오차를 분석한 결과 탁수예측오차는 AME 0.5~24 mg/L, RMSE 0.7~30.2mg/L의 범위로 비교적 실측값을 잘 반영한 것으로 나타났다. 임하댐의 경우 탁수층의 위치와 두께, 그리고 최고 탁도값을 적절히 재현 하였지만, 안동댐은 최고 탁도값 예측에서 다소 오차가 발생하는 것으로 나타났다. 안동호와 임하호 단독 운영시와 연계 운영시의 탁수변화 파악을 위해 초기 홍수사상이 발생한 8월 이후부터 저수지내의 TSS농도 분포를 비교하였다. 안동호의 경우 댐앞지점의 탁수분포는 수온성층구조에 영향을 받아, 단독 운영시(EL. 130 m)보다 연계운영시(EL. 140 m)에 탁수의 중심이 높은 위치에 형성되었다. 단독 운영시 10월 이후에 전도현상으로 인해 침강되지 않은 잔류 탁수층이 저수지 하부로 확산되었지만, 연계 운영시에는 재부상 되어 상층으로 확산되는 것으로 모의되었다. 또한 연계운영시 유량이동으로 인해 안동호의 탁수 댐앞 도달시간이 짧아지는 것으로 나타났다. 반면 임하호는 연계 운영시 안동댐으로 유출이 생기면서 중층에서 탁수량이 저감되는 것으로 모의되었다. 저수지 내 탁수량 분석을 위해 SS 15 mg/L 이상의 잔류 탁수량을 분석한 결과, 연계운영시 안동호의 평균 잔류탁수량 비율은 11.8% 증가, 임하호의 경우 11.7% 감소하였다. 또한, 탁수의 댐하류 방류일수도 SS 15 mg/L 기준 임하호 9일 저감, 안동호는 70일 증가하여 임하호의 탁수가 안동호의 탁수 장기화에 영향을 주는 것으로 나타났다.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.4
• /
• pp.294-300
• /
• 1996

We performed an experiment to confirm the possibility of wasabi culture using the wat­er of the Soyang River Dam in Chunchon and the ground water in Suwon. Water mineral content of Soyang River except for P was less than that of ground water of Suwon. Dis­solved oxgen and E C of Chunchon was proper to culture wasabi but E C and dissolved oxgen of Suwon was not suitable for that. Water temp. of Soyang river was very changable by month while that of the ground water in Suwon was kept constantly. In Soyang river of Chunchon the month that water temp. show $8{\sim}18^{\circ}C$, optimal growth temp., was May to Nov. and the month that water temp. show less than $6^{\circ}C$, growth limit temp., was $Jan.\;{\sim}\;Feb.$ of Chunchon. Rhizome weight of main stem in Chunchon and Suwon was 63g and 22g per plant and rate of maketable rhizome was each 80%, 0% by culture of 32 months to include raising see­dling period of 13 months. Dry matter partitioning ratio of petiole in Soyang river of Chunchon was the highest of all others but it was lowest of all others in ground water of Suwon. Rhizome weight of main stem in Chunchon was showed possitive correlation with plant height and fresh top weight and in Suwon it was showed possitive correlation with root weight and high possitive correlation with No. of total leaves and No. of tillers.

• Korean Journal of Food Science and Technology
• /
• v.14 no.4
• /
• pp.301-308
• /
• 1982

Chungkook-jang Koji was fermented with rice straw at $40^{\circ}C\;and\;50^{\circ}C$ for 72 hours. The changes of proximate composition, pH, titrable acidity, nitrogen compounds, protease activity and free-amino acids during the fermentation were investigated. Moisture, lipid and protein contents remained essentially unchanged during the fermentation. The pH was gradually increased from 6.4 to 7.46 and 7.82 at $40^{\circ}C\;and\;50^{\circ}C$, respectively, after 72 hour fermentation. Amino type and water soluble nitrogen increased as fermentation progressed. however, the former slightly decreased after 60 hour fermentation. Chungkook-jang fermented at $40^{\circ}C$ showed somewhat higher protease activity than $50^{\circ}C$. However, protease activity at both fermentation temperatures showed the same trend; that is, it increased until 48 hour fermentation and thereafter decrease. Free amino acid content of Chung-kook-jang after 72 hour fermentation at $40^{\circ}C$ was 6 times greater than that of the steamed soybean, while it was 2.5 times greater at $50^{\circ}C$. Based on these results. it seems that the optimum fermentation conditions for Chungkook-jang were $40^{\circ}C$ and 72 hours.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.2
• /
• pp.86-103
• /
• 2016

'Sukchunjeahdo' illustration-book, which was left by Han, Pil-gyo(韓弼敎 : 1807~1878)in the late Joseon Dynasty, includes pictorial record paintings containing government offices, Eupchi, and Feng Shui condition drawn by Gyehwa(界畵) method Sabangjeondomyobeop(四方顚倒描法) and is the rare historical material that help to understand spatial structure and landscape characteristics. Youngyuhyun(永柔縣) and Sincheongun(信川郡) town, the case sites of this study, show Feng Shui foundation structure and placement rules of government offices in the Joseon Period are applied such as 3Dan 1Myo(三壇一廟 : Sajikdan, Yeodan, Seonghwangdan, Hyanggyo), 3Mun 3Jo(三門三朝 : Oeah, Dongheon, Naeah) and Jeonjohuchim(前朝後寢) etc. by setting the upper and lower hierarchy of the north south central axis. The circulation system is the pattern that roads are segmented around the marketplace of the entrance of the town and the structure is that heading to the north along the internal way leads to the government office and going out to the main street leads to the major city. Baesanimsu(背山臨水 : Mountain in backward and water in front) foundation, back hill pine forest, intentionally created low mountains and town forest etc. showed landscape aesthetics well suited for the environmental comfort condition such as microclimate control, natural disaster prevention, psychological stability reflecting color constancy principle etc. and tower pavilions were built throughout the scenic spot, reflecting life philosophy and thoughts of contemporaries such as physical and mental discipline, satisfied at the reality of poverty, returning to nature etc. For government office landscape, shielding and buffer planting, landscape planting etc. were considered around Gaeksa(客舍), Dongheon(東軒), Naeah(內衙) backyard and deciduous tree s and flowering trees were cultivated as main species and in case of Gaeksa, tiled pavilions and pavilions topped with poke weed in tetragonal pond were introduced to Dongheon and Naeah and separate pavilions were built for the purpose of physical and mental discipline and military training such as archery. Back hill pine tree forest formed back landscape and zelkova, pear trees, willow trees, old pine trees, lotus, flowering trees etc. were cultivated as gardening trees and Feng-Shui forest with willow trees as its main species was created for landscape and practical purposes. On the other hand, various cultural landscape elements etc. were introduced such as pavilions, pond serving as fire protection water(square and circle), stone pagoda and stone Buddha, fountains and wells, monument houses, flagpoles etc. In case of Sincheongun town forest(邑藪), Manhagwan(挽河觀), Moonmujeong(文武井), Sangjangdae(上場岱) and Hajangdae(下場岱) Market place, Josanshup<(造山藪 : Dongseojanglim(東西長林)>, Namcheon(南川) etc. were combined and community cultural park with the nature of modern urban park was operated. In this context, government office landscape shows the garden management aspect where square pond and pavilions, flowering trees are harmonized around side pavilion and backyard. Also, environmental design technique not biased to aesthetics and ideological moral philosophy and comprehensively considering functionality (shielding and fire prevention, microclimate control, etc.) and environmental soundness etc. is working.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.3
• /
• pp.174-183
• /
• 2014

Seabed beneath and near coastal structures may undergo large excess pore water pressure composed of oscillatory and residual components in the case of long durations of high wave loading. This excess pore water pressure may reduce effective stress and, consequently, the seabed may liquefy. If liquefaction occurs in the seabed, the structure may sink, overturn, and eventually increase the failure potential. In this study, to evaluate the liquefaction potential on the seabed, numerical analysis was conducted using the expanded 2-dimensional numerical wave tank to account for an irregular wave field. In the condition of an irregular wave field, the dynamic wave pressure and water flow velocity acting on the seabed and the surface boundary of the composite breakwater structure were estimated. Simulation results were used as input data in a finite element computer program for elastoplastic seabed response. Simulations evaluated the time and spatial variations in excess pore water pressure, effective stress, and liquefaction potential in the seabed. Additionally, the deformation of the seabed and the displacement of the structure as a function of time were quantitatively evaluated. From the results of the analysis, the liquefaction potential at the seabed in front and rear of the composite breakwater was identified. Since the liquefied seabed particles have no resistance to force, scour potential could increase on the seabed. In addition, the strength decrease of the seabed due to the liquefaction can increase the structural motion and significantly influence the stability of the composite breakwater. Due to limitations of allowable paper length, the studied results were divided into two portions; (I) focusing on the dynamic response of structure, acceleration, deformation of seabed, and (II) focusing on the time variation in excess pore water pressure, liquefaction, effective stress path in the seabed. This paper corresponds to (II).