• Journal of Venture Innovation
• /
• v.2 no.2
• /
• pp.31-46
• /
• 2019

Materials and Parts acts as the bridge in the manufacturing industry. In 2018, the materials and parts industry became the leading industry in Korea as its export reached $316.2 billion, accounting for 52.3 percent of the country's total exports. As such, it is the main industry of Korea leading the trade surplus, but when it comes to Japan, it is not. The trade deficit with Japan shrinks to $24 billion last year but the materials and parts industry still accounts for 60 percent of total deficit, which is about $15.1 billion. Today Japan has the top competitiveness in the high-tech materials and parts industry and the factors can be found in cooperation and symbiosis among companies, monotsukuri spirit, and long-term government policy. In order for Korean economy to pursue the Japan's high-tech materials and parts industry, the following change of perception is necessary. First, the material and parts industry requires win-win cooperation. In general, materials and parts are intermediate products. Therefore, it is important to understand the characterist that the transactions are all made up between companies not the with consumers. Second, expansion of joint technology development is absolutely necessary. South Korea is a leading country in the field of general-purpose materials and parts. However, the research shows that South Korea has structure which small and medium-sized companies could have difficulties in developing high-tech products as finding demand and developing market are hard due to low participation of large corporations at R&D stage. It is necessary for large corporations to participate in joint R&D and share opinions of customers from the beginning stage of R&D. Third, a long-term approach is needed. Structural vulnerabilities in the Korea's materials and parts industry, including the lack of advanced technologies is the main reason of solidification of Korea's trade deficit with Japan but there are also cultural differences about technology in the background. Even if it takes time, a long-term approach is absolutely necessary to build up technology and know-how in order to secure competitiveness in the high-tech materials and parts industry. This approach applies to act of corporation and government policy.

• Journal of Korean Society of Forest Science
• /
• v.106 no.3
• /
• pp.288-299
• /
• 2017

This study was conducted to find out the influence of drought stress on physiological responses of Synurus deltoides. Drought stress was induced by withholding water for 25 days. Leaf water potentials were decreased of both predawn (${\Psi}_{pd}$) and mid-day (${\Psi}_{mid}$) with increasing drought stress, but water saturation dificit (WSD) was 7 times increased. ${\Psi}_{pd}-{\Psi}_{mid}$ showed the significant difference of 0.22~0.18 MPa in stressed before 10 days, and nonsignificant as treatment time became longer. A strong reduction of stomatal conductance ($gH_2O$) and stomatal transpiration rate (E) were observed after 15 days of drought stress Significant reductions of net apparent quantum yield (${\Phi}$) and maximum photosynthesis rate ($Pn_{max}$) were observed after 20 days of drought stress; However, water use efficiency (WUE) was shown the opposite trend. This implies that decrease of photosynthesis rate may be due to an inability to regulate water and $CO_2$ exchanged through the stomata. From JIP analysis, flux ratios (${\Psi}_O$ and ${\Phi}_{EO}$) and performance index on absorption basis ($PI_{ABS}$) were dramatically decreased withholding water after 15 days, which reflects the relative reduction of photosystem II activity. The leaf of S. deltoides showed osmotic adjustment of -0.35 MPa at full turgor and -0.40 MPa at zero turgor, and also cell-wall elastic adjustment of 9.4 MPa, indicating that S. deltoides tolerate drought stress through osmotic adjustment and cell-wall elastic adjustment. The degree of change in water relations parameters such as Vo/DW, Vt/DW decreased with increasing drought stress. This result showed that S. deltoides was exhibited a strong reduction of photosynthetic activity to approximately -0.93 MPa of predawn leaf water potential, and both of osmotic adjustment and cell-wall elastic adjustment in drought stress condition appears to be an important adaptation for restoration in this species.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.2
• /
• pp.90-103
• /
• 2009

The poem 'Kyungjusipiyung(慶州十二詠)' written by Seo, Geo-jeong(徐居正) describes sentiments felt for the ruined historical and cultural landscape of Silla's capital city, Kyungju. It differs from the existing 'Eight Sceneries(八景)' as it conveys the strong metaphorical aesthetics of ruins as the episodes and figures are sung, as well as the myths and stories related to the representative holy places of the Silla culture: Gyelim(鷄林), Banwolseong(半月城), Najeong(蘿井), Oneung(五陵), Geumosan(金鰲山), the scenic beauty of deep placeness, Poseokjeong(鮑石亭), Mooncheon(蚊川), Cheomseongdae(瞻星臺), Boonhwangsa(芬皇寺), Youngmyosa(靈妙寺) and Grave of the General Kim Yu-Sin(金庾信墓). Compared with the former "Eight Sceneries" Poems, including Seo Geojeong's 'Kyungjusipiyung', there is a difference in the content of theme recitation, as well as in structure and form, especially with the deep impression of the classical features of the meanings and acts. The sequence of theme recitation seems to be composed of more than two visual corridors visited during trips that last longer than two days. The dominant emotions expresses in this poem, through written in the spring, are regret and sadness such as 'worn', 'broken and ruined', 'old and sad', without touching on the beauty of nature and the taste for life that is found in most of the Eight Sceneries Poems. Thus, the feelings of the reciter himself, Seo, Geo-jeong, about the described sceneries and their symbolism are more greatly emphasized than the beauty of form. The characteristic aspect of his experiences of ruins expressed from 'Kyungjusipiyung' is that the experiences were, first of all, qualitative of the aura conveyed; that is, the quality omnipresent throughout the culture of Silla as reflected in the twelve historical and cultural landscapes. In this poem, the cultural ruins of the invisible dimension such as the myths and legends are described by repetition, parallelism, juxtaposition, reflection and admiration from the antiphrases, as well as the civilized ruins of the visible dimension such as the various sceneries and features of Kyungju. This seems to be characteristic of the methods by which Seo, Geo-jeong appreciates 'Silla' in the poem 'Kyungjusipiyung'. Ruins as an Aesthetic Object imply the noble pride of Seo, Geo-jeong in identifying himself with the great nature of ruins. In 'Kyungjusipiyung', the images of the ruins of Silla and Kyungju are interspersed in spite of his positive recognition of 'the village of Kyungju' based on his records. However, though the concept of ruins has a pessimistic tone connoting the road of extinction and downfall, the aspect here seems to ambivalently contain the desire to recover and revive Kyungju through the Chosun Dynasty as adominant influence on the earlier Chosun's literary tide. The aesthetics of the scenery found in Seo, Geo-jeong's 'Kyungjusipiyung' contain the strongest of metaphor and symbolism by converting the experiences of the paradoxical ruins into the value of reflective experiences.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.3
• /
• pp.1-13
• /
• 2018

Landscape Architecture is a minority manpower field that requires wide knowledge and experience. Therefore, the service market is narrower than other fields, and education service for practitioners is lacking. The purpose of this study is to propose e-learning content development methodology that can provide customized landscaping practical education according to the level of education and increase the economic efficiency of the development process. First, in theoretical review, the ADDIE model was modified to select the curriculum development model that pursues efficiency and introduced the concept of reusing learning objects in the SCORM-based model. In particular, to overcome the problems presented in the precious studies, the analysis and design stages have been strengthened and faculty designers with integrated knowledge of Landscape Architecture and ICT have led the overall phase. The actual development process is based on a step by step procedure--analysis of landscaping practitioners needs and environments, etc., teaching and learning procedures and the design of activities considering contents reuse, the first development such as actual shooting and editing, and the second development reusing the first development content--and was done in the order of evaluation and revision of professionalism and satisfaction. As a result of the study, the space-based courses composed of modular learning objects were first developed as 216 courses in 8 subjects, as 208 courses in 3 subjects in total, in which the modularized learning object are crossed and combined in units and difficulty-based courses were second developed in 216 courses with 3 subjects in total. As a result of the evaluation the satisfaction assessment of the overall satisfaction was 4.20 and the average value of the eight measures was 3.97, both being close to 4.0. For the professional assessment, the scores of 8 subjects were very high at 84.8 to 96.4 points. in context, the scores of 5 subjects were equal to from 89.9 to 96.4 points. In conclusion, as the study was conducted based on a clear understanding of the digital characteristics of e-learning contents and general characteristic of the landscaping industry, it was possible to develop a curriculum by developing a course composed of modular learning objects and reusing learning objects by unit. In particular, it has been proven to be effective in conveying professional knowledge and experiences via general procedures and provided an opportunity to overcome some analog problems that may occur in offline education. In the future, further studies need to be done by expanding the content and by focusing on segmented subjects.

• Korean Journal of Remote Sensing
• /
• v.28 no.1
• /
• pp.11-19
• /
• 2012

Air-borne pollen, biogenically created aerosol particle, influences Earth's radiative balance, visibility impairment, and human health. The importance of pollens has resulted in numerous experimental studies aimed at characterizing their dispersion and transport, as well as health effects. There is, however, limited scientific information concerning the optical properties of airborne pollen particles contributing to total ambient aerosols. In this study, for the first time, optical characteristics of pollen such as aerosol backscattering coefficient, aerosol extinction coefficient, and depolarization ratio at 532 nm and their effect to the atmospheric aerosol were studied by lidar remotes sensing technique. Dual-Lidar observations were carried out at the Gwangju Institute of Science & Technology (GIST) located in Gwagnju, Korea ($35.15^{\circ}E$, $126.53^{\circ}N$) for a spring pollen event from 5 to 7 May 2009. The pollen concentration was measured at the rooftop of Gwangju Bohoon hospital where the building is located 1.0 km apart from lidar site by using Burkard trap sampler. During intensive observation period, high pollen concentration was detected as 1360, 2696, and $1952m^{-3}$ in 5, 6, and 7 May, and increased lidar return signal below 1.5km altitude. Pollen optical depth retrieved from depolarization ratio was 0.036, 0.021, and 0.019 in 5, 6, and 7 May, respectively. Pollen particles mainly detected in daytime resulting increased aerosol optical depth and decrease of Angstrom exponent.

• Korean Journal of Environmental Agriculture
• /
• v.5 no.2
• /
• pp.149-155
• /
• 1986

The fatty acid compositions of phospholipids extracted from leaves and leaf mitochondria, which were sampled from several horicultural plants grown under blue color-deficient sunlight (BCDS), were determined and compared with those from plants grown under natural white colored sunlight(WCS). It was found that the mitochondria isolated from plants grown under BCDS contained phospholipid whose degree of unsaturation in unit of number of double bonds per lipid molecule was remarkably higher than that from plants grown under WCS, the relative increment being $8{\sim}49%$. This was significantly larger than the relative increment, $4{\sim}8%$ for total phospholipid extracted from whole leaves grown under BCDS campared to WCS. This observation demonstrated that the blue light effect of sunlight on the chemical property of cellular membranes, as long as it was concerned with fatty acid composition, arose mainly at the mitochondrial membrane. Also observing that the degree of unsaturation of mitochondrial phospholipid was much lower than that of total phospholipid, it was interpreted that this was the consequence of rather active oxidative destruction of lipid-fatty acid components occuring in mitochondrial membrane by the reactive oxygen species, especially superoxide($O_2-$), which was known to be produced in mitochondrial inner membrane through the side reactions of the respiratory electron transport chain and also probably through the photosensitized reaction involving oxygen induced by blue colored light. Thus, it may be tentatively concluded that the extent of photosensitization in mitochondrial membrane could be considerably reduced under BCDS resulting in lowering of the $O_2-$ level in the respirating organelle The possible involvement of photodynamic action in membrane oxidation was also indicated by the fact that the typical fat-soluble antioxidant, ${\alpha}-tocopherol$, was found to be contained on a higher level in leaves under BCDS than those under WCS.

• The Journal of Engineering Geology
• /
• v.17 no.1 s.50
• /
• pp.15-25
• /
• 2007

In general, the life and asset casualties that occur due to landslide or slope failure in urban areas are larger than that in rural areas. In order to reduce the casualties, a slope management program is necessary to categorize slopes based on properties and to manage them systematically. The slope management system is the establishment of the data base for the geological and geotechnical factor according to slope stability, and the utilization of the data base to manage slopes. The suitable system must develop to slopes in urban area through the survey, analysis and evaluation process. Based on the above necessity, the slope management program which is applicable to slope management in an urban area has been developed at Hwangryung Mt. in Busan as a target area. The developed slope management program has various functions such as slope ID number of each slope or sub-region of a mountain, making a slope data sheet, analysis and grouping of slope stability, and establishment of a data base. The slope management program is constructed by use of GIS, and the survey, test and analysis data according to all slopes can be input and edited into the program. The program can also be utilized practically by end users due to the convenient input, edition printing, management and operation of slope data. Therefore, the slope management system has been established on the application of the developed program in Busan which is located in slope area. As the system is widely applied to other cities, the slope in urban area can be managed systematically and the slope hazards can be minimized.

• Journal of Korea Technology Innovation Society
• /
• v.19 no.3
• /
• pp.465-482
• /
• 2016

Previous researches have introduced various ways to analyze the impact of standardization on innovation while the works are not only small in number but based on interview or case study. This paper addresses the impact of standardization activities within South Korean industries on technological innovation applying an empirical analysis of standardization activities and technological innovation. Drawing on Korean Industrial Standards Classification from panel data of 2003 to 2012, we employed corresponding data of each industrial classification: Number of standards, Accumulated number of standards, Number of patents applied in Korea, Sales, Operational profit, Intangible asset, and R&D invest. In the first model, we run panel data models employing the number of patents applied in Korea as an independent variable, and the number of standards, accumulated number of standards, sales, and operational profit as dependent variables to observe industrial impacts upon the relationship between standards and patents, along with time lagged consideration. The result shows that number of standards are revealed to have a negative influence on patent applications in the year of research, and no significant effect appears for the next two years while positive effect shows up on the third year. Meanwhie, accumulated number of standards turned out to have positive effects on patent applications in Korea. This implies it takes time for innovation subjects to embrace newly established standards while having a significant amount of positive effect on technological innovation in the long term. In the second model, we use canonical correlation analysis to find industrial-wide characteristics. The result of this model is equivalent to the result of panel data analysis except in a few industries, where some industry specific characteristics appear. The implications of our results present that Korean policy makers have to take account of industrial effects on standardization to promote technological innovation.

• Microbiology and Biotechnology Letters
• /
• v.48 no.3
• /
• pp.344-357
• /
• 2020

Strain improvement and bioprocess development were undertaken to enhance hyaluronic acid(HA) production by Streptococcus zooepidemicus cells. Using a high-yielding mutant strain, statistical medium optimization was carried out in shake flask cultures, resulting in 52% increase in HA production (5.38 g/l) at the optimal medium composition relative to the parallel control cultures. For sufficient supply of dissolved oxygen (DO), which turned out to be crucial for enhanced production of HA, agitation system and speed were intensively investigated in 5 L bioreactor cultures. Increase in oxygen mass transfer coefficient (k_La) through increment of agitation speed (rpm) and 35% expansion of diameter of the newly-designed impellers showed significantly positive effects on HA production. By installing an expanded Rushton-turbine impeller for efficient break-down of sparged air, and an extended marine impeller above the Rushton-turbine impeller for efficient mixing of the air-born viscous fermentation broth, maximum amount of HA (9.79 g/l) was obtained at 450 rpm, 1.8 times higher level than that of the corresponding flask culture. Subsequently, the possibility of bioprocess scale-up to a 50 L bioreactor was investigated. Despite almost identical maximum HA production (9.11 vs 9.25 g/l), the average HA volumetric productivity (r_p) of the 50 L culture turned out only 74% compared to the corresponding 5 L culture during the exponential phase, possibly caused by shear damages imposed on the producing cells at the high stirring in the 50 L culture. The scale-up process could be successfully achieved if a scale-up criterion of constant oxygen mass transfer coefficient (k_La) is applied to the 50 L pilot-scale bioreactor system.

• Korean Journal of Food Science and Technology
• /
• v.45 no.6
• /
• pp.714-720
• /
• 2013

We investigated the brewing and fermenting characteristics of makgeolli produced from high-yielding rice varieties. We used the high-yielding indica rice varieties, Anda and Dasan 1, and the japonica varieties, Deuraechan and Boramchan. Our results showed that the rice protein level was the highest in makgeolli produced from Anda ($7.5{\pm}0.2%$), while the amylose level was the lowest in makgeolli produced from the mid- to late-maturing japonica varieties (Deuraechan, $18.9{\pm}0.7%$; Boramchan, $18.9{\pm}1.4%$). Samples of makgeolli produced from Anda, Deuraechan, and Boramchan by using the Ipguk (Koji) method had an alcohol content of 16.6-17.4% on completion of fermentation. By contrast, makgeolli produced from Dasan 1 had an alcohol content of 14.3%; further, the makgeolli differed significantly in the sensory test and was scored as excellent regarding comprehensive preference. For makgeolli produced by using the uncooked rice fermentation method, samples produced from the indica varieties, Anda and Dasan 1, had lower alcohol contents (17.2% and 17.0%, respectively) and higher total acidity levels (0.33% and 0.31%, respectively) than did samples produced from the japonica varieties, Deuraechan and Boramchan (0.28% for both). In the sensory test, samples produced from Anda and Dasan 1 performed significantly better regarding scent, swallowing, and comprehensive preference.