• The Transactions of the Korea Information Processing Society
• /
• v.5 no.8
• /
• pp.2102-2116
• /
• 1998

본 논문에서는 TCP/IP 프로토콜을 기반으로 하는 인터넷에서 SNMP의 MIB-II를 활용하여 분석 파라미터를 정의하고 이를 계산하는 알고리즘을 제안하고자 한다. TCP/IP 망의 사용자에게 적절한 QoS를 제공하기 위해서는 성능과 장애에 관련된 파리미터를 기반으로 한 망 관리 행위를 수행해야 한다. 이를 위해서 인터넷 관리 표준을 정의된 MIB-II의 관리 정보를 기반으로 분석 파라미터를 정의하고 이를 계산하기 위한 알고리즘을 제시하고자 한다. MIB-II에서 system, interface, ip, snmp 그룹의 관리 변수를 Case 다이어그램에 따라 분석하여 선로 이용률, 에러 수신율, 인터페이스 패킷 송수신율, 인터페이스 패킷 송수신 손실률, 입출력 트래픽률, 방송형 송수신 트래픽 비율, 시스템 패킷 입출력률, 시스템 패킷 송수신 손실률, 시스템 자원 부하율, 패킷 전달률, 경로 설정 실패율, 관리 트래픽 이용률 등의 분석 파라미터와 계산 알고리즘을 제안한다. 분석 파라미터 계산 알고리즘에 대한 적용성을 실험하기 위해서 실존하는 라우터를 대상으로 분석 결과를 제시하고 진단하였다. 이러한 인터넷 분석 파라미터 계산 알고리즘은 망 관리자가 전체 TCP/IP 통신 네트워크를 진단하고 분석할 수 있는 자료로 활용될 수 있을 뿐만 아니라 인터넷 사용자에게 QoS를 제공하루 수 있을 것으로 기대된다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.123-123
• /
• 2012

최근 연구되고 있는 TSV(Through Silicon Via) 기술은 Si 웨이퍼 상에 직접 전기적 연결 통로인 관통홀을 형성하는 방법으로 칩간 연결거리를 최소화 할 수 있으며, 부피의 감소, 연결부 단축에 따른 빠른 신호 전달을 가능하게 한다. 이러한 TSV 기술은 최근의 초경량화와 고집적화로 대표되는 전자제품의 요구를 만족시킬 수 있는 차세대 실장법으로 기대를 모으고 있다. 한편, 납땜 재료의 주 원료인 주석은 주로 반도체 소자의 제조, 반도체 칩과 기판의 접합 및 플립 칩 (Flip Chip) 제조시의 범프 형성 등 반도체용 배선재료에 널리 사용되고 있다. 최근에는 납의 유해성 때문에 대부분의 전자제품은 무연솔더를 이용하여 제조되고 있지만, 주석을 이용한 반도체 소자가 고밀도화, 고 용량화 및 미세피치(Fine Pitch)화 되고 있기 때문에, 반도체 칩의 근방에 배치된 주석으로부터 많은 알파 방사선이 방출되어 메모리 셀의 정보를 유실시키는 소프트 에러 (Soft Error)가 발생되는 위험이 많아지고 있다. 이로 인해, 반도체 소자 및 납땜 재료의 주 원료인 주석의 고순도화가 요구되고 있으며, 특히 알파 방사선의 방출이 낮은 로우알파솔더 (Low Alpha Solder)가 요구되고 있다. 이에 따라 본 연구는 4인치 실리콘 웨이퍼상에 직경 $60{\mu}m$, 깊이 $120{\mu}m$의 비아홀을 형성하고, 비아 홀 내에 기능 박막증착 및 전해도금을 이용하여 전도성 물질인 Cu를 충전한 후 직경 $80{\mu}m$의 로우알파 Sn-1.0Ag-0.5Cu 솔더를 접합 한 후, 접합부 신뢰성 평가를 수행을 위해 고속 전단시험을 실시하였다. 비아 홀 내 미세구조와 범프의 형상 및 전단시험 후 파괴모드의 분석은 FE-SEM (Field Emission Scanning Electron Microscope)을 이용하여 관찰하였다. 연구 결과 비아의 입구 막힘이나 보이드(Void)와 같은 결함 없이 Cu를 충전하였으며, 고속전단의 경우는 전단 속도가 증가할수록 취성파괴가 증가하는 경향을 보였다. 본 연구를 통하여 전해도금을 이용한 비아 홀 내 Cu의 고속 충전 및 로우알파 솔더 볼의 범프 형성이 가능하였으며, 이로 인한 전자제품의 소프트에러의 감소가 기대된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.1-8
• /
• 2017

The purpose of this study is to propose a cache structure for processing large-volume building information modeling (BIM) geometry data,whereit is difficult to allocate physical memory. As the number of BIM orders has increased in the public sector, it is becoming more common to visualize and calculate large-volume BIM geometry data. Design and review collaboration can require a lot of time to download large-volume BIM data through the network. If the BIM data exceeds the physical free-memory limit, visualization and geometry computation cannot be possible. In order to utilize large amounts of BIM data on insufficient physical memory or a low-bandwidth network, it is advantageous to cache only the data necessary for BIM geometry rendering and calculation time. Thisstudy proposes acache structure for efficiently rendering and calculating large-volume BIM geometry data where it is difficult to allocate enough physical memory.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.7
• /
• pp.669-677
• /
• 2009

In general, the pitch momentum biased system that induces inherently nutational motion in roll/yaw plane, has been adapted for geosynchronous communications satellites. This paper discusses the method of roll attitude control using yaw axis momentum management method for a low earth orbit(LEO) satellite which is a pitch momentum biased system equipped with only two reaction wheels. The robustness of wheel momentum management method with PI-controller is investigated comparing with wheel torque control method. The transfer function of roll/yaw axis momentum management system that is useful for attitude controller design is derived. The disturbance effect of roll/yaw axis momentum management system for attitude control is investigated to identify design parameters such as magnitude of momentum bias and to get the insight for controller design. As an example, the PID controller design result of momentum management system for roll/yaw axis control is provided and the simulation results are presented to provide further physical insight into the momentum management system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11B
• /
• pp.772-783
• /
• 2005

In this paper, we propose an effective multicasting protocol in wireless ad-hoc networks. Conventional wired and wireless network multicast protocols do not perform well in wireless ad hoc networks because they were designed without consideration of ad hoc environments such as node mobility, limited bandwidth, high error probability. To solve this problem, some multicasting protocols for ad hoc network have been proposed in the literature. However, these protocols can not provide high packet delivery ratio, low control packet overhead and low expended bandwidth at the same time. Therefore, in this paper, we propose RTMA that improves multicasting performance in wireless ad hoc networks. RTMA calculates its current region from its position information by using GPS in order to make tree among the multicast group nodes in the same region. The proposed region-based tree method is for high packet delivery ratio, low control packet overhead when many senders send data packets. RTMA makes a reliable tree by using speed information to fill a gap of the weak points of the tree structure. When searching the routing path, RTMA selects the reliable path excluding high speed nodes.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.5
• /
• pp.38-44
• /
• 2007

This paper presented a location and attitude estimation scheme of a capsule endoscope based on ultrasonic ranging. The scheme comprised eight on-capsule ultrasonic sensors to alleviate measurement errors due to irregularities in human body ultrasonic characteristics. It calculated the coordinate values and angles in a Cartesian coordinate system. The Matlab simulation reflecting random errors yielded the average deviations of 0.8mm in the location and $0.2^{\circ}$ in the attitude angle. These values are far smaller than normal intestine movement ranges inside human body, and will contribute accurate diagnosis of intestine.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4B
• /
• pp.165-173
• /
• 2008

In this paper, we propose a new reliable broadcast protocol referred to as timer-based reliable broadcast (TRB) for wireless sensor networks (WSNs). The proposed TRB scheme exploits (1) bitmap based explicit ACK to effectively reduce the unnecessary error control messages and (2) randomized timer for ACK transmission to substantially reduce the possibility of contentions. Although it has been argued that 100% reliability is not necessary in WSNs, there should be messages (such as mission-critical message, task assignment, software updates, etc.) that need to be reliably delivered to the entire sensor field. We propose to use the TRB algorithm for such cases. Performance evaluation shows that the TRB scheme achieves 100 % reliability significantly better than other schemes with expense of slightly increased energy consumption.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.203-209
• /
• 2010

A compact ANSI/EIA 709.1 protocol analyzer system suited for maintenance of LonWorks network for safety management of underground facilities was developed and tested. The hardware is based on the TMS320LF2406A embedded system, and the software was designed using Visual C++6.0 under Windows XP environment. Connected to the LonWorks network the developed protocol analyzer decodes the raw packets and pass them to the master PC through USB port. Then on the PC the packets are processed and analyzed in various aspects and the key features that are essential to the maintenance of LonWorks network installed at underground facilities are displayed in a user-friendly format. Performance of the developed protocol analyzer was evaluated through a series of experiments, by measuring the speed of packet analysis and the error rate. The protocol analyzer proved to work reliably even under the increased bandwidth. However, more comprehensive tests under various underground environmental conditions are desired.

• Journal of Digital Contents Society
• /
• v.19 no.1
• /
• pp.113-122
• /
• 2018

In level 3 automated vehicles, drivers are expected to encounter transition of control when the system reaches its limit. Drivers need to refocus their attention on the road ahead and gain situational awareness. Appropriate information should be conveyed during this period in order to prevent human errors. In this paper, we defined the takeover process as 'in-the-middle-of-the-loop' and conducted Task Analysis and Work Domain Analysis to find out information requirements. As a result, we specified required information types and interface considerations. Moreover, we conducted an experimental study to find how the information types affect drivers on situation awareness, cognitive load and reaction time. Consequently, we found different information on system transparency should be conveyed depending on the urgency of takeover situation and driver guidance could help drivers with better situation awareness after the takeover.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.7
• /
• pp.9-19
• /
• 2004

WLAN (Wireless Local Area Networks) needs error recovery and flow control schemes to support reliable multicast protocol. Limited wireless bandwidth, as well as queuing losses caused by the asymmetric wired/wireless interactions, demands more effective approaches for reducing packet losses. Moreover, since the wireless channel is a shared broadcast medium, if sender receives feedback information simultaneously from several receivers, the feedback delays data frame transmission of forward direction by introducing channel congestion and burden at the sender. Therefore, it is important to minimize the amount of feedback information from receivers. In this paper, we propose an ARS(Adaptive Redundancy Scheme) that combines FEC(Forward Error Correction) using channel state estimation and ARQ(Automatic Repeat Request) both to reduce the amount of feedback information and the number of retransmissions and to guarantee high data reliability in a WLAN multicast environment. Performance of the proposed scheme is evaluated by means of analysis and simulations in AWGN and Rayleigh fading channels. The results show that the proposed scheme reduces the amount of feedback information and the number of retransmissions and guarantees high data reliability, while keeping throughput efficiency similarly with the conventional FEC and ARQ scheme.