• 제목/요약/키워드: 전기IT

검색결과 23,855건 처리시간 0.047초

코어 변화에 대한 자계 특성 (Magnetic Field Properties About Core Change)

  • 김기준
    • 한국전기전자재료학회논문지
    • /
    • 제25권2호
    • /
    • pp.159-164
    • /
    • 2012
  • In this paper, it tried to develop the core sensor for detection of micro magnetic field in electric wires. The sensor is non contact type and is consisted of ferrite core for low price. To investigate their properties for variations of current, it changed the number of winding and the length of sample core, it examined, to check the live wire situation in built-in wires, electrical characteristics due to difference between electric wires and core sensor. As the results, it verified live wire situation at the number of winding(5,000) and within length of 6[cm]. Also, it obtained magnetic field magnitude decreased inverse proportion ratio to a square about difference between electric wires and core sensor.

UPnP 브리지를 위한 범용 MFD 구조 (General MFD Structure for UPnP Bridge)

  • 최용순;강정석;박홍성
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
    • /
    • pp.289-290
    • /
    • 2007
  • UPnP Bridge supporting diverse network interface has to meet standard requirements in order to be connected with legacy devices. It is able to provide or bridge a service description and device description according to a specification because IEEE1394 and USB have this standard requirements. But it is difficult to know whether it RS232C supports only serial communication and packet transfer. It need a document for the standard definition of communication protocol on UPnP device having such interface. By doing so, this document can understand device and packet type. This paper defines MFD(Message Field Description) and makes UPnP message converter. So it will be base to standardize supporting variable legacy device.

  • PDF

산소 결함이 ZnGa_2O_4$:Mn형광체 발광 특성에 미치는 효과 (Effect of oxygen defects on luminescent characteristics of ZnGa_2O_4$:Mn phosphors)

  • 박용규;한정인;곽민기;한종근;주성후
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제9권10호
    • /
    • pp.1040-1046
    • /
    • 1996
  • Low voltage phosphor, ZnGa$_{2}$O$_{4}$:Mn, was synthesized and sintered at the high temperature in Ar or vacuum. By XRD analysis, it is confirmed that poly crystalline ZnGa$_{2}$O$_{4}$:Mn solid solution was formed. From EPMA analysis of the samples prepared in Ar and vacuum, the change of oxygen content was investigated and as a result, it was observed that the oxygen amounts were reduced in ZnGa$_{2}$O$_{4}$:Mn prepared in vacuum. It caused the deficiency in oxygen amounts in the phosphor and then consequently, it results in the formation of the energy level near 513 nm. It contributes to the improvement of the brightness of ZnGa$_{2}$O$_{4}$:Mn.

  • PDF

OPC 기반 전력 IT 시스템 연동 플랫폼 (Power IT System Integration Platform based on OPC)

  • 송병권;김건웅
    • 전기전자학회논문지
    • /
    • 제14권2호
    • /
    • pp.33-40
    • /
    • 2010
  • OPC는 산업자동화와 엔터프라이즈 시스템을 지원하는 개방형 연결 시스템이다. OPC XML-DA는 웹 서비스 기반의 플랫폼에 독립적인 통신을 제공한다. 본 논문에서는 OPC를 사용해 변전소 자동화 프로토콜로 사용되는 IEC61850을 통해 배전 프로토콜인 DNP3.0, AMI에서 사용되는 DLMS 프로토콜간의 상호 연동을 위한 전력 IT 시스템 연동 플랫폼을 제안한다.

HCBKA 기반 IT2TSK 퍼지 예측시스템 설계 (Design of HCBKA-Based IT2TSK Fuzzy Prediction System)

  • 방영근;이철희
    • 전기학회논문지
    • /
    • 제60권7호
    • /
    • pp.1396-1403
    • /
    • 2011
  • It is not easy to analyze the strong nonlinear time series and effectively design a good prediction system especially due to the difficulties in handling the potential uncertainty included in data and prediction method. To solve this problem, a new design method for fuzzy prediction system is suggested in this paper. The proposed method contains the followings as major parts ; the first-order difference detection to extract the stable information from the nonlinear characteristics of time series, the fuzzy rule generation based on the hierarchically classifying clustering technique to reduce incorrectness of the system parameter identification, and the IT2TSK fuzzy logic system to reasonably handle the potential uncertainty of the series. In addition, the design of the multiple predictors is considered to reflect sufficiently the diverse characteristics concealed in the series. Finally, computer simulations are performed to verify the performance and the effectiveness of the proposed prediction system.

배전용 변압기의 실시간 고조파 분석 알고리즘 개발 (The Development of Real-Time Harmonic Analysis Algorithm in Distribution Transformer)

  • 박철우
    • 조명전기설비학회논문지
    • /
    • 제27권3호
    • /
    • pp.43-49
    • /
    • 2013
  • Recently harmonics flowing into power system is increasing as the usage of semiconductor equipments and switching mode power equipments are increasing. Harmonics cause problems such as heat increasing and reduction in capacity of transformers, especially the harmonics flowing into a distribution transformer can lead to the lifetime reduction of transformer. In this paper, we are about to develop a device that can monitor harmonics in real-time as it is affixed to a distribution transformer. Unlike the existing expensive harmonic analysis device, a new harmonic analysis algorithm is proposed in order to implement low-cost equipment. The real-time harmonic analysis algorithm proposed in this paper allows implementation on low performance microcontrollers, thus it can monitor the harmonic in real-time as it is individually affixed to the transformer. Therefore, it would improve the reliability of the transformer and stable power system operation would be possible as it can prevent the transformer accidents in advance.

전력시장 거래를 일한 전력거래소의 IT 네트워크 (Power Exchange IT Network for Electricity Market Transactions)

  • 정우덕;윤용태;박종근
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 A
    • /
    • pp.105-106
    • /
    • 2004
  • This paper explains a network for various participants of the electricity market to make bids on the power exchange. The power exchange accepts bids for various markets such as day-ahead, realtime, and financial over this interface. It exists on the IT plane of the market hierarchy and the participants are able to access it over the internet.

  • PDF

폐수(廢水) 중(中) 유가금속(有價金屬) 회수기술(回收技術) 동향(動向) (Technology Trends of Metal Recovery from Wastewater)

  • 황용길;길상철;김종헌
    • 자원리싸이클링
    • /
    • 제22권3호
    • /
    • pp.91-99
    • /
    • 2013
  • 우리나라 경제의 근간을 이루고 있는 철강산업, 자동차산업이나 전자산업에서 전기도금은 중요한 역할을 담당하고 있다. 전기도금 폐액은 전처리, 도금 및 후처리과정에서 발생하는 폐액이고 다양한 금속염을 포함한 유해한 폐수이다. 현재 일반적인 폐수는 환경법상 배수 규제치 이하로 중화처리한 후 각종 금속이 혼합된 슬러지는 매립하거나 위탁처리하고 있는데, 처리에 따른 막대한 비용이 들뿐만 아니라 매립지 부족과 유가금속 자원 낭비를 초래하고 있다. 따라서 이러한 폐수에서 유가금속을 회수하는 연구가 활발하게 진행되고 있다. 전기도금 폐액에서 금속을 선택적으로 회수하는 새로운 방법은 철산화세균을 이용하는 방법, 황화제를 이용한 황화물(MS) 회수법 및 유기용매를 이용한 용매추출법 등에 관한 연구가 진행되고 있다. 이들의 폐수처리방법을 이용하여 Fe, Cu, Zn, Ni 등의 금속이온이 혼합된 폐수에서 유가금속을 95%이상 회수하는 성과를 거두었다. 이는 전기도금공정에서 배출되는 폐수를 폐기할 것이 아니라 도시광산의 중요한 금속자원으로 활용될 것으로 기대된다.

기획특집 - 전기에너지산업 현장(現場)을 가다 - KEPRI (한전 전력연구원)

  • 대한전기협회
    • 전기저널
    • /
    • 통권411호
    • /
    • pp.52-58
    • /
    • 2011
  • R&D분야 정부경영평가 5년 연속 1위. 한전 전력연구원의 최근 성과이다. 이 같은 공인평가는 KEPRI의 위상을 여실히 증명하고 있다. 고품질의 전력공급을 위한 창의적인 전력기술 개발과 현장 중심의 기술지원을 수행하고 있는 전력연구원은 지난 1961년 한국전력 전기시험소로 출범한 이후 1993년 대덕연구단지 입주, 1995년 7월 전력연구원으로 대대적인 개편을 단행하면서 우리 전력산업 연구개발에 커다란 획을 긋는 다양한 실적들을 쏟아내고 있다. 산하에 4개 연구소(녹색성장연구소, 원자력발전연구소, 수화력발전연구소, 송배전연구소) 와 2개 센터(엔지니어링센터, S/W센터), 2실(연구전략실, 연구지원실) 2팀(NRC-DC추진팀, 품질혁신팀)으로 조직되어 있는 전력연구원의 비전은 역시 최상위의 글로벌 연구원 등극이며, 전력기술의 새 지평을 열어 이를 실현하겠다는 각오다. 저탄소 녹색성장을 위한 신재생에너지, 전력IT, CCS, 스마트그리드 등 친환경 연구개발에 주력하면서 한전의 글로벌 엔지니어링 Company 달성의 주역임을 선언한 KEPRI의 열정적인 행보가 전력산업계의 주목을 새롭게 끌고 있다. 전력산업의 미래기술 확보와 성장동력을 창출해 내고 있는 전력연구원의 핵심 조직과 중점 수행사업 등을 3회에 걸쳐 소개한다.

  • PDF

생체모방 종이작동기(electro-active paper)의 전기기계적인 구동 시뮬레이션 (Electromechanical Simulation of Cellulose Based Biomimetic Electro-Active Paper)

  • 장상동;김재환;김흥수
    • 한국소음진동공학회논문집
    • /
    • 제17권12호
    • /
    • pp.1179-1183
    • /
    • 2007
  • Electro-Active paper(EAPap) is a new smart material that has a potential to be used in biomimetic actuator and sensor. It is made by cellulose that is abundant material in nature. EAPap is fascinating with its biodegradability, lightweight, large displacement, high mechanical strength and low actuation voltage. Actuating mechanism of EAPap is known to be the combined effects of ion migration and piezoelectricity. However, the electromechanical actuation mechanisms are not yet to be established. This paper presents the modeling of the actuation behavior of water infused cellulose samples and their composite dielectric constants calculated by Maxwell-Wagner theory. Electro-mechanical forces were calculated using Maxwell stress tensor method. Bending deflection was evaluated from simple beam model and compared with experimental observation, and which result in good correlation with each other.