• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.2
• /
• pp.159-164
• /
• 2012

In this paper, it tried to develop the core sensor for detection of micro magnetic field in electric wires. The sensor is non contact type and is consisted of ferrite core for low price. To investigate their properties for variations of current, it changed the number of winding and the length of sample core, it examined, to check the live wire situation in built-in wires, electrical characteristics due to difference between electric wires and core sensor. As the results, it verified live wire situation at the number of winding(5,000) and within length of 6[cm]. Also, it obtained magnetic field magnitude decreased inverse proportion ratio to a square about difference between electric wires and core sensor.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.289-290
• /
• 2007

UPnP Bridge supporting diverse network interface has to meet standard requirements in order to be connected with legacy devices. It is able to provide or bridge a service description and device description according to a specification because IEEE1394 and USB have this standard requirements. But it is difficult to know whether it RS232C supports only serial communication and packet transfer. It need a document for the standard definition of communication protocol on UPnP device having such interface. By doing so, this document can understand device and packet type. This paper defines MFD(Message Field Description) and makes UPnP message converter. So it will be base to standardize supporting variable legacy device.

• Electrical & Electronic Materials
• /
• v.9 no.10
• /
• pp.1040-1046
• /
• 1996

Low voltage phosphor, ZnGa$_{2}$O$_{4}$:Mn, was synthesized and sintered at the high temperature in Ar or vacuum. By XRD analysis, it is confirmed that poly crystalline ZnGa$_{2}$O$_{4}$:Mn solid solution was formed. From EPMA analysis of the samples prepared in Ar and vacuum, the change of oxygen content was investigated and as a result, it was observed that the oxygen amounts were reduced in ZnGa$_{2}$O$_{4}$:Mn prepared in vacuum. It caused the deficiency in oxygen amounts in the phosphor and then consequently, it results in the formation of the energy level near 513 nm. It contributes to the improvement of the brightness of ZnGa$_{2}$O$_{4}$:Mn.

• Journal of IKEEE
• /
• v.14 no.2
• /
• pp.33-40
• /
• 2010

OPC is open connectivity in industrial automation and the enterprise systems that support industry. OPC XML-DA provides a platform-independent on web service-based communication. This paper propose Power IT system integration platform using OPC that is to integration between DLMS protocol used in AMI system and Distribute protocol DNP3.0 throught IEC61850 using Substation Automation Protocol.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.7
• /
• pp.1396-1403
• /
• 2011

It is not easy to analyze the strong nonlinear time series and effectively design a good prediction system especially due to the difficulties in handling the potential uncertainty included in data and prediction method. To solve this problem, a new design method for fuzzy prediction system is suggested in this paper. The proposed method contains the followings as major parts ; the first-order difference detection to extract the stable information from the nonlinear characteristics of time series, the fuzzy rule generation based on the hierarchically classifying clustering technique to reduce incorrectness of the system parameter identification, and the IT2TSK fuzzy logic system to reasonably handle the potential uncertainty of the series. In addition, the design of the multiple predictors is considered to reflect sufficiently the diverse characteristics concealed in the series. Finally, computer simulations are performed to verify the performance and the effectiveness of the proposed prediction system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.3
• /
• pp.43-49
• /
• 2013

Recently harmonics flowing into power system is increasing as the usage of semiconductor equipments and switching mode power equipments are increasing. Harmonics cause problems such as heat increasing and reduction in capacity of transformers, especially the harmonics flowing into a distribution transformer can lead to the lifetime reduction of transformer. In this paper, we are about to develop a device that can monitor harmonics in real-time as it is affixed to a distribution transformer. Unlike the existing expensive harmonic analysis device, a new harmonic analysis algorithm is proposed in order to implement low-cost equipment. The real-time harmonic analysis algorithm proposed in this paper allows implementation on low performance microcontrollers, thus it can monitor the harmonic in real-time as it is individually affixed to the transformer. Therefore, it would improve the reliability of the transformer and stable power system operation would be possible as it can prevent the transformer accidents in advance.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.105-106
• /
• 2004

This paper explains a network for various participants of the electricity market to make bids on the power exchange. The power exchange accepts bids for various markets such as day-ahead, realtime, and financial over this interface. It exists on the IT plane of the market hierarchy and the participants are able to access it over the internet.

• Resources Recycling
• /
• v.22 no.3
• /
• pp.91-99
• /
• 2013

Steel industry which has been accomplishes the base of our country economy, automobile and electronic industry are taking charge of the role, whose electroplating is important. Large amount of wastewater and various metal salts, including hazardous materials was generated from the electroplating pre-treatment, plating, washing and post-plating. Currently, the general wastewater follows in the environmental law and neutralization after controlling, sludge where the various metal is mixed reclaims below multiple regulative and trust it is controlling. The sludge which includes the gas price metal reclaims in the field and trust it controls. a reclamation price of land it is insufficient but and the control expense holds plentifully and it loses the gas price metal which is valuable. Consequently, The research regarding to recover a gas price metal actively from this waste water, it is advanced. A new method to recover valuable metals from electroplating wastewater synthesis of metal sulfides using topical methods utilizing iron oxidizing bacteria, reagent of sulfides and solvent extraction using an organic solvent, such as the development of the law to recover these metals and metal sulfides of wastewater using selective recovery have been studied. By using these wastewater treatment method under frequency above 95%, it has been obtained the valuable metal from the wastewater, where the metal ion of Fe, Cu, Zn and Ni complexes was mixed. As we discuss the wastewater, which has been discharged from electroplating process, it is important and will be applied to the resources of metal in the urban mine.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.411
• /
• pp.52-58
• /
• 2011

R&D분야 정부경영평가 5년 연속 1위. 한전 전력연구원의 최근 성과이다. 이 같은 공인평가는 KEPRI의 위상을 여실히 증명하고 있다. 고품질의 전력공급을 위한 창의적인 전력기술 개발과 현장 중심의 기술지원을 수행하고 있는 전력연구원은 지난 1961년 한국전력 전기시험소로 출범한 이후 1993년 대덕연구단지 입주, 1995년 7월 전력연구원으로 대대적인 개편을 단행하면서 우리 전력산업 연구개발에 커다란 획을 긋는 다양한 실적들을 쏟아내고 있다. 산하에 4개 연구소(녹색성장연구소, 원자력발전연구소, 수화력발전연구소, 송배전연구소) 와 2개 센터(엔지니어링센터, S/W센터), 2실(연구전략실, 연구지원실) 2팀(NRC-DC추진팀, 품질혁신팀)으로 조직되어 있는 전력연구원의 비전은 역시 최상위의 글로벌 연구원 등극이며, 전력기술의 새 지평을 열어 이를 실현하겠다는 각오다. 저탄소 녹색성장을 위한 신재생에너지, 전력IT, CCS, 스마트그리드 등 친환경 연구개발에 주력하면서 한전의 글로벌 엔지니어링 Company 달성의 주역임을 선언한 KEPRI의 열정적인 행보가 전력산업계의 주목을 새롭게 끌고 있다. 전력산업의 미래기술 확보와 성장동력을 창출해 내고 있는 전력연구원의 핵심 조직과 중점 수행사업 등을 3회에 걸쳐 소개한다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.12
• /
• pp.1179-1183
• /
• 2007

Electro-Active paper(EAPap) is a new smart material that has a potential to be used in biomimetic actuator and sensor. It is made by cellulose that is abundant material in nature. EAPap is fascinating with its biodegradability, lightweight, large displacement, high mechanical strength and low actuation voltage. Actuating mechanism of EAPap is known to be the combined effects of ion migration and piezoelectricity. However, the electromechanical actuation mechanisms are not yet to be established. This paper presents the modeling of the actuation behavior of water infused cellulose samples and their composite dielectric constants calculated by Maxwell-Wagner theory. Electro-mechanical forces were calculated using Maxwell stress tensor method. Bending deflection was evaluated from simple beam model and compared with experimental observation, and which result in good correlation with each other.