• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.4-5
• /
• 2019

본 논문은 DC마이크로그리드에서 저전압 배터리 에너지 저장 시스템과 DC 버스 연결을 위한 Dual Active Bridge(DAB) 컨버터의 제어 방법에 대한 연구이다. DC 마이크로그리드에서 전력을 효율적으로 사용하기 위해 양방향 전력전달이 쉬운 DAB 컨버터는 많이 사용되고 있다. 다만, 낮은 배터리 저장 시스템을 사용하는 경우 과도상태에서 DC 버스 측 커패시터를 충전하기 위해 높은 돌입전류가 발생하게 된다. 이러한, 높은 돌입전류는 시스템의 전력반도체 소자를 파손시키는 문제를 가져온다. 따라서, 초기 돌입전류를 저감시킬 수 있는 소프트 스타트 알고리즘이 필요하다. 본 논문에서는 돌입전류 저감을 위한 소프트 스타트 알고리즘을 제안하고, 3kW급 DAB 컨버터의 실험 결과를 바탕으로 제안 된 알고리즘을 검증하였다.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.4
• /
• pp.58-64
• /
• 2023

The adoption of hydrogen-powered Elec is expanding globally. Hydrogen is recognized as a potentially hazardous energy source, and safety assessment is crucial for the development of plans to supply hydrogen-powered electric buses. Hydrogen gas leakage can have a significant impact during bus operations, and continuous hydrogen leakage in hydrogen-powered vehicles can result in fatal accidents. In this study, information about hydrogen leakage is collected through sensors installed within the vehicles and is measured when the sensor detects a leak. The study also proposes the use of Pseudo Fuel Leakage (PFL, %) as an additional indicator for evaluating and monitoring hydrogen safety and leakage.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.1
• /
• pp.17-30
• /
• 2018

Currently, the global climate change response paradigm has been changed to a universal response system in which all nations, not the developed countries, participate. Korea has also set a target of 25.9 million tons of transportation greenhouse gas reduction targets by 2030. Korean society is expected to enter the super aging society in 2026. In this study, to reduce the greenhouse gas emissions in public transport and to improve the convenience of transportation vulnerable, we estimate the willingness to pay(WTP) and social benefits assuming that the existing feeder buses are replaced with medium-sized low floor electric buses. To this end, survey was conducted on bus users in the metropolitan area and WTP was estimated by using contingent valuation method(CVM), which is one of the non-market value evaluation methods. As a result of estimation of WTP, the average WTP is 51.4 (won / time person), estimated the economic benefits were 50 million won on weekdays and 40 million won on weekends in Gyeonggi Province in 2014.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.261-268
• /
• 2018

The use of electric cable was limited due to the installation time and large space as the increase of power demand and load quantity in side line. In order to solve these problems, the application of busway system which can supply the large current was increasing. But it was lack of methods of performance tests to evaluate the reliability and results of test for busway system. In this paper, we presented items to evaluate the reliability test for epoxy coated busway system with reference to IEC 61349-6. In addition, we proposed items to evaluate the reliability and long term life cycle test for the epoxy coated busway system. The combined acceleration deterioration test that reflects actual conditions of the survey as much as possible was conducted considering both thermal and electrical stresses. The deterioration condition was selected to satisfy fifty years life expectation and the insulation performance verification test of the busway system confirmed the long term life prediction. Furthermore, as test items for reliability assessment of compliance with the environment for the use of temperature, humidity and load current where busway system was installed, thermal overload test, water immersion test, cold shock temperature test and thermal cycle test were performed. And we examined changes in characteristics and abnormality after tests. From results, the test items presented to evaluate performance and reliability of the epoxy insulated busway system were confirmed to be appropriate in this paper, and the performance of the product was also confirmed to be excellent for reliability tests.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.1
• /
• pp.499-505
• /
• 2022

Recently, the metaverse has been receiving a lot of attention. Metaverse means a virtual space, and various events can be held in this space. In particular, 360-degree video, a format optimized for the metaverse space, is attracting attention. A 360-degree video image is created by stitching images taken with multiple cameras or lenses in all 360-degree directions. When shooting a 360-degree video, a variety of shooting equipment, including a shooting staff to take a picture of a subject in front of the camera, is displayed on the video. Therefore, when shooting a 360-degree video, you have to hide everything except the subject around the camera. There are several problems with this shooting method. Among them, lighting is the biggest problem. This is because it is very difficult to install a fixture that focuses on the subject from behind the camera as in conventional image shooting. This study is an experimental study to find the optimal angle for 360-degree images by adjusting the angle of indoor lighting. We propose a method to record 360-degree video without installing additional lighting. Based on the results of this study, it is expected that experiments will be conducted through more various shooting angles in the future, and furthermore, it is expected that it will be helpful when using 360-degree images in the metaverse space.

• Journal of the Korean Institute of Gas
• /
• v.24 no.2
• /
• pp.9-14
• /
• 2020

This paper is a purpose to study the failure examples for a large bus vehicle fire. The first example, the researcher certified the fact that the absorbing material break away from the upper side of engine room because of weaken durability and the fire was produced in engine. The second example, it sought the fact that the fire breaks out by electric short because of over-load of compressor. The third example, it found the fact that the fire took place by heating of bellows upper part that was connected with muffler and exhaust manifold. The fourth example, it knew the fact that the fire occurred because of the electric short inside junction box of crash body part that was located to driver seat rightside. Therefore, the fire of a large bus occurring by decrepit of absorbing material and electric short have to thoroughgoingly manage the damage and dangerousness if it happens.

• Journal of Internet Computing and Services
• /
• v.24 no.1
• /
• pp.87-97
• /
• 2023

Charger infrastructure facilities are designed and installed based on a constant power supply. Initially designed charging facilities support charging of rapidly growing electric vehicles on a limited power supply basis. In addition, current commercial vehicles can only be fully charged, and are supported by the rapid equalization charging method. However, commercial vehicles operate according to a set schedule, so flexible charging is essential. In this paper, we propose a power operation method with more than 20% efficiency improvement by using a fixed schedule-based charging scheduling and power distribution technique of a commercial bus based on the same amount of power in accordance with the rapid growth and increase of electric vehicles.

• Electrical & Electronic Materials
• /
• v.3 no.2
• /
• pp.123-130
• /
• 1990

본 논문은 페라이트의 온도특성을 측정하기 위한 다중측정시스템의 설계에 관하여 연구한 것이다. 본 시스템은 전기로의 온도를 제어하기 위한 열전대 콘트롤러, 릴레이 동작을 제어하기 위한 릴레이 콘트롤러 및 릴레이를 구동시키기 위한 스윗칭부, 그리고 GPIB를 이용한 LCR메터 제어부와 이들을 마이크로 컴퓨터와 통신하기 버스 라인으로 구성하였다. 열전대 콘트롤러와 릴레이 콘트롤러는 8255A(Intel LSI)를 주로 이용하여 설계하였으며 릴레이로는 고주파용 릴레이를 사용하여 스윗칭 트랜지스터로 구동시키는 방법을 택하였다. 그리고 LCR-메터에는 GPIB(AD50488)보드를 사용하였다. 측정시료로서는 복합첨가제방식에 의하여 제작된 Mn-Zn-Fe계 페라이트의 시편을 사용하였으며 시료의 특성측정은 자체 제작한 자동계측시스템을 이용하여 분석하였다. 측정결과 온도보상점 T$_{o}$ 와 큐리온도 T$_{c}$ 바로 아래에서 투자율의 급격한 변화를 확인할 수 있었다. 그리고 특성의 계측에 있어서 일관성이 있고 정확한 자료를 얻을 수 있었으며 따라서 본 시스템이 인터페이스와 컴퓨터 사이의 연결성이 좋은 자동다중계측시스템으로 활용 할 수 있음을 확인한다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.7-8
• /
• 2015

2007년 MIT에서의 자기공진 기술 시연 이후 무선전력 시스템 기술에 있어서 많은 부분들이 다수의 연구자들에 의해 연구되고있다. 하지만, 무선전력 시스템의 효율에 큰 영향을 미치는 급집전 코일 및 선로용 케이블에 대한 연구는 매우 미진한 상황이다. 다만, 최근 들어 국내에서는 KAIST와 동원OLEV의 무선충전 전기버스와 철도기술연구원의 무가선 철도, 물류 분야의 무선전력 기술의 실용화가 점진적으로 이루어지기 시작하면서 무선전력 전용의 고주파 대전력 케이블에 대한 연구 필요성이 대두되고 있다. 본 연구에서 대전력 무선 전송 분야의 적용을 위해 100 kHz이하 대역에서의 고주파 전력 케이블 최적화를 위한 단위 집합 도체 특성을 실험적으로 평가하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.10
• /
• pp.60-64
• /
• 2015

Many people think that Electric Vehicles(EVs) is the best method to resolve the problems of running out of fossil fuels. But EVs take long time for charging. So, EVs with battery swapping systems(EVBS) are developed to resolve this problem. Nonetheless, EVBS is not spreaded widely because the method of durability test in couplers is not defined. In this study, the evaluation method of durability test in couplers is defined by some standards and the measurement uncertainty is used to increase the reliability of EV couplers.