• Korean Journal of Materials Research
• /
• v.17 no.8
• /
• pp.447-451
• /
• 2007

We investigated the dependence of the various annealing conditions and thickness ($6\sim45nm$) of the Ti-doped $Al_2O_3$ coating on the electrochemical properties and the capacity fading of Ti-doped $Al_2O_3$ coated $LiCoO_2$ films. The Ti-doped-$Al_2O_3$-coating layer and the cathode films were deposited on $Al_2O_3$ plate substrates by RF-magnetron sputter. Microstructural and electrochemical properties of Ti-doped-$Al_2O_3$-coated $LiCoO_2$ films were investigated by transmission electron microscopy (TEM) and a dc four-point probe method, respectively. The cycling performance of Ti-doped $Al_2O_3$ coated $LiCoO_2$ film was improved at higher cut-off voltage. But it has different electrochemical properties with various annealing conditions. They were related on the microstructure, surface morphology and the interface condition. Suppression of Li-ion migration is dominant at the coating thickness >24.nm during charge/discharge processes. It is due to the electrochemically passive nature of the Ti-doped $Al_2O_3$ films. The sample be made up of Ti-doped $Al_2O_3$ coated on annealed $LiCoO_2$ film with additional annealing at $400^{\circ}C$ had good adhesion between coating layer and cathode films. This sample showed the best capacity retention of $\sim92%$ with a charge cut off of 4.5 V after 50 cycles. The Ti-doped $Al_2O_3$ film was an amorphous phase and it has a higher electrical conductivity than that of the $Al_2O_3$ film. Therefore, the Ti-doped $Al_2O_3$ coated improved the cycle performance and the capacity retention at high voltage (4.5 V) of $LiCoO_2$ films.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.06a
• /
• pp.91-120
• /
• 1996

경제발전과 더불어 산업의 많은 분야에서 순수 및 초순순의 사용이 증가하고 있으나, 환경오염에 의한 원수의 오염에 따라 순수 및 초순순제조의 장치비와 처리비용의 증가가 야기되고 있다. 현재 국내에는 화력, 원자력발전소를 비롯하여 열병합발전소, 석유화학공장, 제약회사, 전기 전자부품회사, 반도체회사 및 철강회사 등 많은 분야에서 순수 및 초순수 제조장치의 구성과 성능이 많은 차이를 나타내고 있다. 국내의 초순수 제조장치는 90% 이상이 이온교환수지를 사용하는 이온교환법과 UF, R/O System과 같은 Membrane을 사용하는 Membrane System을 병행하여 적용하고 있다. 국내 초순수처리 Plant에서는 통상 전처리 System과 1차 순수제조 System 및 초순수 System이 상호 연결되어 Plant가 구성 운영되고 있다. 전처리 System에는 응집침전, 여과 흡착, 살균 등이 적용되고 있으며 여과 System에 Membrane을 적용할 수 있으나 국내에서는 특별한 경우를 제외하고 대부분 전처리 여과 System에 Media Filter를 사용한다. 전처리 System도 순수처리 장치의 전처리로는 없어서는 안되는 System이지만 여기에는 전처리 System을 제외하고 국내에서 적용하고 있는 초순수처리 System의 공정현황과 각 System별 특징을 설명하고 있다. 초순순 System에는 요구 수질에 따라 다소 차이가 있지만 반도체 공업에서 사용되는 초순수 System이 이중 최고의 Grade로 반도체공업에서 적용되고 있는 System을 기준하였다. 특히 Membrane을 적용한 초순수제조 System이 증가하고 있어 R/O, ED, EDR, CDI, (EDI)와 같은 Membrane System의 특성과 원리를 검토하였다.대적으로 높은 산소확산계수와 물에 대해서는 낮은 투과도를 가져야 한다. 높은 산소확산계수는 반응을 빠르게 하는 잇점이 있으며 물에 대한 낮은 투과도는 센서내의 전해질 물질을 유지보호하는 역할을 한다. 분리막이 산소전극에 이용될 경우 높은 산소 확산계수 이외에도 적절한 기계적 강도, 열적 안정성 등이 요구된다. 몰입이 가능하여 임계치가 저하된 것으로 여겨진다. 또한 광학적 이득의 존재는 이 구조에 의한 극단파장 반도체 레이저다이오드의 실현 가능성을 나타내는 것이다.548 mL에 비해 통계학적으로 의의 있게 적었다(p<0.05). 결론: 관상동맥우회로 조성수술에서 전방온혈심정지액을 사용할 때 희석되지 많은 고농도 포타슘은 fliud overload와 수혈을 피하고 delivery kit를 사용하지 않음으로써 효과적이고 만족할 만한 심근보호 효과를 보였다.를 보였다.4주까지에서는 비교적 폐포는 정상적 구조를 유지하면서 부분적으로 소폐동맥 중막의 비후와 간질에 호산구 침윤의 소견이 특징적으로 관찰되었다. 결론: 분리 폐 관류는 정맥주입 방법에 비해 고농도의 cisplatin 투여로 인한 다른 장기에서의 농도 증가 없이 폐 조직에 약 50배 정도의 고농도 cisplatin을 투여할 수 있었으며, 또한 분리 폐 관류 시 cisplatin에 의한 직접적 폐 독성은 발견되지 않았다이 낮았으나 통계학적 의의는 없었다[10.0%(4/40) : 8.2%(20/244), p>0.05]. 결론: 비디오흉강경술에서 재발을 낮추기 위해 수술시 폐야 전체를 관찰하여 존재하는 폐기포를 놓치지 않는 것이 중요하며, 폐기포를 확인하지 못한 경우와 이차성 자연기흉에 대해서는 흉막유착술에 더 세심한 주의가 필요하다는 것을 확인하였다. 비디오흉강경수술은 통증이 적고, 입원기간이 짧고, 사회

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.314-315
• /
• 2011

최근에 $Eu^{3+}$ 이온이 첨가된 적색 형광체에 대한 연구가 활발히 진행되고 있다. 현재 상업적으로 이용 가능한 적색 형광체와 비교하여 $GdVO_4$를 모체로 갖는 적색 형광체는 우수한 열적 안정성과 광학적 특성을 나타낸다. 본 연구에서는 고효율의 적색 형광체를 개발하기 위하여 고상 반응법을 사용하여 $Gd_{1-x}VO_4$ : $Eu_x^{3+}$ 형광체를 합성하였다. $Gd_{1-x}VO_4$ : $Eu_x^{3+}$ 형광체 분말 시료는 활성체인 $Eu^{3+}$의 함량을 0, 0.05, 0.10, 0.15, 0.20 mol로 변화시키며, 초기 물질 $Gd_2O_3$ (99.99%), $H_3BO_3$ (99.99%), $Eu_2O_3$ (99.9%)를 화학 적량으로 준비하였다. 분말은 볼밀과 건조 작업을 거친 후, 500$^{\circ}C$ 전기로에서 5시간 동안 하소 공정, 1,100$^{\circ}C$에서 6시간 동안 소성시켰다. 합성된 형광체 분말의 XRD 측정한 결과에 의하면, $Eu^{3+}$의 함량비에 관계없이 모든 분말 시료들에서 주 피크는 24.7$^{\circ}$와 33.2$^{\circ}$에 최대값을 갖는 (200)와 (112)면의 회절 신호들이 관측되었고, 상대적으로 약한 회절 세기를 갖는 (101), (211), (301), (103), (312)와 (420)면의 회절 신호들은 각각 18.6$^{\circ}$, 31.1$^{\circ}$, 40.1$^{\circ}$, 44.6$^{\circ}$, 49.2$^{\circ}$와 57.1$^{\circ}$에서 나타났다(Fig. 1). 이결과를 JCPDS(86-0996)와 비교함으로써, 합성된 형광체 분말의 결정 구조는 정방정계임을 확인할 수 있었다. $Eu^{3+}$의 함량비가 0.05 mol에서 0.15 mol로 증가함에 따라 주 피크인 (200)면의 회절 신호의 세기는 증가한 반면, 0.20 mol에서는 급격하게 감소하였으며, 이 경우에 반치폭의 크기는 0.16$^{\circ}$이었다. 결정 입자의 크기를 결정하기 위하여 (200)면의 회절 피크에 대한 정보를 잘 알려진 Scherrer의 식에 대입하여 계산한 결과, $Eu^{3+}$의 함량비가 0 mol인 경우에, 평균 크기는 48 nm이었다. $Eu^{3+}$ 함량비를 증가함에 따라 결정 입자의 크기도 비례하여 증가하였으며, 0.15 mol에서 최대값을 나타내었으나, 농도 억제 효과로 인하여 0.20 mol 에서는 현저히 감소하였다. 표면 형상의 변화를 관측한 SEM 측정 결과에 의하면, $Eu^{3+}$의 함량비가 0 mol에서 0.15 mol로 증가함에 따라 결정 입자의 모양은 사다리꼴 형태에서 모서리가 둥글게 깎인 구형으로 변형되는 것을 관측할 수 있었으며 평균 크기는 500 nm이었다(Fig. 2). $Eu^{3+}$의 함량이 0.20 mol인 경우에 결정 입자의 형상은 더욱 구형에 접근하였으나, 평균 크기는 최소값을 나타내었다. 실험 결과로부터, 적절한 함량비를 갖는 $Eu^{3+}$ 이온을 첨가함으로써 적색 형광체 $Gd_{1-x}VO_4$ : $Eu^{3+}$ 분말의 결정 크기와 발광 세기를 제어할 수 있음을 제안한다.

• Membrane Journal
• /
• v.28 no.5
• /
• pp.307-319
• /
• 2018

Ion-exchange membrane (IEM) has fixed charge groups and is a separation membrane which is capable of selectively transporting ions of the opposite polarity. Recently, the interest in IEMs has been increasing as the importance of the desalination and energy conversion processes using them as the key components has increased. Since the IEMs determine the efficiency of the above process, it is necessary to improve the separation performance and durability of them and also to lower the expensive membrane price, which is a hindrance to the widening application of the IEM process. Therefore, it is urgent to develop high-performance and low-cost IEMs. Among various types of IEMs, pore-filled membranes prepared by filling ionomer into a porous polymer substrate are intermediate forms of homogeneous membranes and heterogeneous membranes. The production cost would be cheap like the case of heterogeneous membranes because of the use of inexpensive supports and the reduction of the amount used of raw materials, and at the same time, they exhibit excellent electrochemical characteristics close to homogeneous membranes. In this review, major research and development trends of pore-filled IEMs, which are attracting attention as high-performance and low-cost IEMs, have been summarized and reported according to the application fields.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.3
• /
• pp.207-211
• /
• 1983

An attempt was made to find out the possibility of utilizing water-melon seed as resources of food fats and protein. The water-melon seed contained 40.40% of crude fat and 28.36% of crude protein. The lipid fraction obtained by silicic acid column chromatography was composed of about 97.35% neutral lipid, and the main components of neutral lipid by thin layer chromatography were triglyceride(50.40%), diglyceride(21.84%) and sterol(11.48%). The predominant fatty acids of total and major lipid classes were linoleic acid(55.30-67.85%), palmitic acid(12.07-28.12%) and oleic acid(9.06-16.40%), whereas stearic acid and linolenic acid were detected as small amounts. The salt soluble protein of watermelon seed was highly dispersible in 0.02M sodium phosphate buffer containing about 0.7M $MgSO_4$, and the extractability of seed protein was about 27%. Glutamic acid and arginine were major amino acids, and the essential amino acids such as lysine, threonine, valine, methionine, isoleucine, leucine and phenylalanine were also detected. The electrophoretic analysis showed 6 bands in water-melon seed protein, and the collection rate of the main protein fraction purified by sephadex G-100 and G-200 was 52.4%. The amino acids of the main fraction protein were also mainly composed of glutamic acid and arginine. The molecular weight for the main protein of the water-melon seed was estimated to be 120,000.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.317-324
• /
• 2010

Metal-supported solid oxide fuel cells (SOFCs) have been developed to commercialize SOFCs. This new type of SOFC has high mechanical strength, but its mass transfer rate may be low due to the presence of a contact layer. In this study, the mass transfer characteristics of an anode-supported SOFC and a metal-supported SOFC are studied by performing numerical simulation. Governing equations, electrochemical reactions, and ceramic physical-property models are determined simultaneously; molecular diffusion and Knudsen diffusion are considered in mass transport analysis of porous media. The experimental results are compared with simulation data to validate the results of numerical simulation. The average current density of the metal-supported SOFC is 23% lower than that of the anode-supported SOFC. However, because of the presence of the contact layer, the metal-supported SOFC has a more uniform distribution than the anode-supported SOFC.

• Korean Chemical Engineering Research
• /
• v.43 no.3
• /
• pp.425-431
• /
• 2005

New type of supercapacitor using high surface area activated carbons mixed with high conductivity polypyrrole (Ppy) has been prepared in order to achieve low impedance and high energy density. Mixed carbons of BP-20 and MSP-20 were used as the active electrode material, and polypyrrole doped with 2-naphthalenesulfonic acid (2-NSA) and carbon black (Super P) as conducting agents were added to activated carbons in order to enhance good electric conductivity. Electrodes prepared with the activated electrode materials and the conducting agents were added to a solution of organic binder [P(VdF-co-HFP) / NMP]. The ratio of optimum electrode composition was 78 : 17 : 5 wt.％ of (MSP20 : BP-20=1 : 1), (Super P : Ppy=10 : 7) and P(VdF-co-HFP) respectively. The performance of unit cell with addition of 7 wt％ Ppy have shown specific capacitance of 28.02 F/g, DC-ESR of $1.34{\Omega}$, AC-ESR of $0.36{\Omega}$, specific energy of 19.87 Wh/kg and specific power of 9.77 kW/kg. With addition of Ppy, quick charge-discharge of unit cell was possible because of low ESR, low charge transfer resistance and quick reaction rate. And good stability up to 500 chargedischarge cycles were retained about 80％ of their original capacity. It was concluded that the specific capacitance originated highly from compound phenomena of the pseudocapacitance by oxidation-reduction of polypyrrole and the nonfaradaic capacitance by adsorption-desorption of activated carbons.

• Journal of the Korean Institute of Gas
• /
• v.20 no.6
• /
• pp.16-22
• /
• 2016

Coating pipe(PLP) has been generally used in buried site for protecting the corrosion. To prevent the damage by occurring the defect, other construction or execution works, an anti-oxidation environment was forcibly made by using protective potential. Coating and protective potential are applied simultaneously, but corrosion rate or defects are not easy to observe because soil composition has many uncertainty. Also, defect of coating pipe can not be directly observed. A corrosion coupon can easily measure a corrosion rate directly. The corrosion rate was measured with 6 scenarios using corrosion coupon during about 1 year(6 scenarios are based on soil type and protective potential or not in this research. Resultingly, the corrosion coupon has not occurred in the case of protected by potential current, but corrosion has occurred in a non-protected site. The corrosion rate was measured at least in the clay, and the propensity of corrosion rate was similar in other soil(sand and loams). The local corrosion has occurred in the clay because of high water content. On the other hand, general corrosion was occurred in sand and loams. Commonly, sand is not to corrosive soil. Although, corrosion occurred in sand can be estimated by chemical component and valid with chemical analysis report.

• Journal of the Society of Disaster Information
• /
• v.13 no.3
• /
• pp.305-312
• /
• 2017

In our society, the advanced, advanced, and information industries have continued to grow and now live in the era of the fourth industrial revolution. As the industry develops, the load of the users has also increased so much that it is deepened by the energy shortage phenomenon and the construction of additional energy facilities is required. Therefore, energy plant construction work is being actively carried out in the coastal area. In particular, it is common to build a plant in the ground by filling the coast with soil in other regions, reflecting the fact that Korea is lacking in the country when constructing power plants, gas and petrochemical plants. Current domestic grounding designs are designed or constructed to suit only the use of grounding resistors based on the electrical equipment design technical standards. However, in the case of a plant facility constructed in the untested buried soil, when the lightning current and the abnormal current are inputted, the facility operator or the user due to the elevation of the ground potential is seriously exposed to the risk of electric shock disaster. In this paper, we analyze the ground resistivity of the landfilled soil and use a computer program (CDEGS) based on KS C IEC 61936-1, We analyze the contact voltage and stratification voltage and propose a grounding design optimized for plant installation.

• Korean Journal of Food Science and Technology
• /
• v.23 no.3
• /
• pp.256-261
• /
• 1991

To isolate new antioxidants from twelve edible seaweeds, mixed methanol and chloroform extract of marine algae was fractionated into several subfractions and their antioxidant activities were measured by using AOM and 1, 1-diphenyl-2-picrylhydrazyl (DPPH). Especially the aqueous-methanol soluble fractions of brown and red algae showed a considerable antioxidant effect. Their antioxidant activities were stronger than synthetic antioxidants such as BHA, BHT, under the same concentration. Further fractionation of the aqueous-methanol soluble fractions using silica gel column chromatography yielded five subfractions. Among them methanol fraction exhibited high DPPH quenching activities. Also, it was confirmed to be benzene-derivative substances of two compounds by UV, HPLC, GC/MS analysis. Its each molecular weight was about 181, 238. These results suggested the existence of two effective natural antioxidant compounds in three edible marine algae.